Rolling Stock
The covered goods wagon Ghs Oppeln was built in large numbers by the Deutsche Reichsbahn from 1936. Due to the small overhang of the vehicle body and the rigid construction, a smooth running performance was achieved. As a result, the maximum speed was set at 90 km/h. After the Second World War, these wagons were found throughout Europe. They were operated by many railway companies and also continued to be built with minor changes in various countries. The G-Nordhausen was rebuilt in large numbers by the East German DR as a modified variant after the Second World War. Some of the wagons were used in the Europ-Park. Exact-Train builds the Ghs Oppeln and G Nordhausen in many variants with many detailed changes. The main features of these wagons are: With and without brake platforms Shifted axles for Oppeln with brake platforms and extension of the vehicle on one side for G Nordhausen with brake platforms. With and without brake cabins. Openable doors. With original roof (smooth) and sheet metal roof (barrel roof) (SAAR, DB, OBB and Eastern European wagons can be accurately reproduced as a result). Accurately reproduced axle bearings of DR/DB/OBB/DRG/SNCF design in roller bearing and plain bearing versions DR crew wagon with oven accurately reproduced DR Nordhausen crew wagon with correct end walls reproduced Underside of the vehicle reproduced in H0 quality with wood imitation and distinguishing colour shades. Distinction between Oppeln and Nordhausen underside accurately reproduced.
On order, lead time to be confirmed
The covered goods wagon Ghs Oppeln was built in large numbers by the Deutsche Reichsbahn from 1936. Due to the small overhang of the vehicle body and the rigid construction, a smooth running characteristic was achieved. As a result, the maximum speed was set at 90 km/h. After the Second World War, these wagons were found throughout Europe. They were operated by many railway companies and, with minor changes, continued to be built in various countries. The G-Nordhausen was rebuilt in large numbers by the East German DR as a modified variant after the Second World War. Some of the wagons were used in the Europ-Park. Exact-Train builds the Ghs Oppeln and G Nordhausen in many variants with numerous detail changes. The main features of these wagons are: With and without brake van compartments Shifted axles for Oppeln with brake van compartments and extension of the vehicle on one side for G Nordhausen with brake van compartments. With and without brake cabins. Opening doors. With original roof (smooth) and sheet metal roof (barrel roof) (SAAR, DB, OBB and Eastern European wagons can thus be reproduced exactly). Exactly reproduced axle bearings of DR/DB/OBB/DRG/SNCF design in roller bearing and plain bearing versions DR crew wagon with stove is precisely reproduced DR Nordhausen crew wagon with correct end walls reproduced Underside of the vehicle reproduced in H0 quality with wood imitation and distinguishing colour shades. Distinction between Oppeln and Nordhausen undersides reproduced exactly.
On order, lead time to be confirmed
Hard coal or lignite is mined in a coal mine.
On order, lead time to be confirmed
Hard coal or lignite is mined in a coal mine.
On order, lead time to be confirmed
Hard coal or lignite is mined in a coal mine.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train, complete with a matching driving trailer, began in close cooperation with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
Planning for the model implementation of the Talbot car carrier train, complete with a matching driving trailer, began in 2019 in close collaboration with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train, including a matching driving trailer, began in close cooperation with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train, including a matching driving trailer, began in close cooperation with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train, including a matching driving trailer, began in close cooperation with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train, including the matching driving trailer, began in close cooperation with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train with a matching driving trailer began in close cooperation with the Swiss importer KML. Production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
As early as 2019, planning for the model implementation of the Talbot car carrier train together with the matching driving trailer began in close cooperation with the Swiss importer KML. The production of the train is already complete, and the models are on their way to Europe, so delivery can begin in the coming weeks.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS purchased 144 intercity multiple units. (94 three-car multiple units and 50 four-car multiple units) These multiple units feature a distinctive full-width cab. The ICM multiple units can be found throughout the country in intercity services. In 1994, the ICM multiple units were equipped with snowploughs. Between 2006 and 2011, the multiple units also underwent a major overhaul. During this overhaul, the multiple units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were taken out of service during this overhaul. The ICM multiple units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM multiple units can run exceptionally slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with an exceptionally well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running characteristics. This running characteristic is also present when running through complex point routes with a long train! 4. The quality of the ICM drive has been demonstrated many times with the Dekas and MCK locomotives and multiple units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with the MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The multiple units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. Multiple units will be fitted with highly detailed interiors and will negotiate a curve radius of R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM multiple units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS acquired 144 intercity multiple units. (94 three-car multiple units and 50 four-car multiple units) These multiple units feature a distinctive through-cab end. The ICM multiple units can be found throughout the country in intercity services. In 1994, the ICM multiple units were fitted with snowploughs. Between 2006 and 2011, the multiple units also underwent a major overhaul. During this overhaul, the multiple units were equipped with air conditioning, a passenger information system, and new windows. Additionally, during this overhaul, the through-cab ends were taken out of service. The ICM multiple units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM multiple units can run particularly slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point layouts with a long train! 4. The quality of the ICM drive has been demonstrated many times with Dekas and MCK locomotives and multiple units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination displays. 5. MFX technology with and without sound is also our standard for AC operation. The multiple units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. Multiple units will be equipped with a very detailed interior and will negotiate a curve radius R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM multiple units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS acquired 144 ICM multiple units. (94 three-car units and 50 four-car units) These units feature a distinctive full-width cab. The ICM units can be found throughout the country in intercity services. In 1994, the ICM units were equipped with snowploughs. Between 2006 and 2011, the units also underwent a major overhaul. During this overhaul, the units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were deactivated during this overhaul. The ICM units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a drive system has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive with high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes into its own better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor starting. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM units can run particularly slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point routes with a long train! 4. The quality of the ICM drive has been demonstrated many times with the Dekas and MCK locomotives and units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to belong to the best in this area. Exact-Train will make use of the experience gained with the MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more due to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting and illuminated destination displays. 5. MFX technology with and without sound is also our standard for AC operation. The units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. The units will be fitted with very detailed interiors and will negotiate a curve radius of R1 effortlessly. Finally, our local model shop will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS purchased 144 ICM multiple units. (94 three-car multiple units and 50 four-car multiple units) These multiple units feature a distinctive full-width cab. The ICM multiple units can be found throughout the country in intercity services. In 1994, the ICM multiple units were equipped with snowploughs. Between 2006 and 2011, the multiple units also underwent a major overhaul. During this overhaul, the multiple units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were taken out of service during this overhaul. The ICM multiple units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM multiple units can run particularly slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point layouts with a long train! 4. The quality of the ICM drive has been demonstrated many times with Dekas and MCK locomotives and multiple units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The multiple units are executed with many (metal) details. The standard of Exact-Train to execute everything properly applies here again. Multiple units will be fitted with a very detailed interior and will negotiate a curve radius R1 effortlessly. Finally, our local model shop will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM multiple units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS acquired 144 ICM multiple units. (94 three-car units and 50 four-car units) These units feature a distinctive through-cab end. The ICM units can be found throughout the country in intercity services. In 1994, the ICM units were fitted with snowploughs. Between 2006 and 2011, the units also underwent a major overhaul. During this overhaul, the units were equipped with air conditioning, a passenger information system, and new windows. Additionally, the through-cab ends were taken out of service during this overhaul. The ICM units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a drive system has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive with high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM units can run particularly slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when navigating complex point layouts with a long train! 4. The quality of the ICM drive has been demonstrated many times in Dekas and MCK locomotives and units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. Units will be equipped with very detailed interiors and will navigate curves of radius R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM units.
On order, lead time to be confirmed
In the 1970s/80s/90s of the last century, NS purchased 144 intercity multiple units. (94 three-car multiple units and 50 four-car multiple units) These multiple units feature a distinctive full-width cab. The ICM multiple units can be found throughout the country in intercity services. In 1994, the ICM multiple units were equipped with snowploughs. Between 2006 and 2011, the multiple units also underwent a major overhaul. During this overhaul, the multiple units were fitted with air conditioning, a passenger information system, and new windows. Additionally, during this overhaul, the full-width cabs were taken out of service. The ICM multiple units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM multiple units can run exceptionally slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with an exceptionally well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point routes with a long train! 4. The quality of the ICM drive has been demonstrated many times with Dekas and MCK locomotives and multiple units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The multiple units are executed with many (metal) details. The standard of Exact-Train to execute everything properly applies here again. Multiple units will be equipped with very detailed interiors and will negotiate a curve radius R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM multiple units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS purchased 144 ICM multiple units. (94 three-car multiple units and 50 four-car multiple units) These multiple units feature a distinctive full-width cab. The ICM multiple units can be found throughout the country in intercity services. In 1994, the ICM multiple units were equipped with snowploughs. Between 2006 and 2011, the multiple units also underwent a major overhaul. During this overhaul, the multiple units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were deactivated during this overhaul. The ICM multiple units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes into its own better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM multiple units can run exceptionally slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with an exceptionally well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point layouts with a long train! 4. The quality of the ICM drive has been demonstrated many times with the Dekas and MCK locomotives and multiple units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with the MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own extra thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The multiple units are executed with many (metal) details. The standard of Exact-Train to execute everything properly also applies here again. Multiple units will be equipped with very detailed interiors and will negotiate a curve radius R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM multiple units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS acquired 144 ICM multiple units. (94 three-car units and 50 four-car units) These units feature a distinctive full-width cab. The ICM units can be found throughout the country in intercity services. In 1994, the ICM units were equipped with snowploughs. Between 2006 and 2011, the units also underwent a major overhaul. During this overhaul, the units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were taken out of service during this overhaul. The ICM units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM units can run particularly slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point routes with a long train! 4. The quality of the ICM drive has been demonstrated many times with the Dekas and MCK locomotives and units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with the MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. The units will be fitted with a very detailed interior and will negotiate a curve radius of R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS purchased 144 ICM multiple units. (94 three-car units and 50 four-car units) These units feature a distinctive full-width cab. The ICM units can be found throughout the country in intercity services. In 1994, the ICM units were equipped with snowploughs. Between 2006 and 2011, the units also underwent a major overhaul. During this overhaul, the units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were deactivated during this overhaul. The ICM units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM units can run exceptionally slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with an exceptionally well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when navigating complex point layouts with a long train! 4. The quality of the ICM drive has been demonstrated many times in Dekas and MCK locomotives and units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component of the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. The units will be fitted with a highly detailed interior and will negotiate a curve radius of R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM units.
On order, lead time to be confirmed
In the 1970s, 1980s and 1990s, NS acquired 144 ICM multiple units. (94 three-car units and 50 four-car units). These units feature a distinctive through-cab end. The ICM units can be found throughout the country in intercity services. In 1994, the ICM units were fitted with snowploughs. Between 2006 and 2011, the units also underwent a major overhaul. During this overhaul, the units were equipped with air conditioning, a passenger information system and new windows. In addition, the through-cab ends were taken out of service during this overhaul. The ICM units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing and finish are at the highest level! We work hard every day to keep it that way. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a drive system has been developed that has proven itself for years. The advantages of this drive system are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive is determined by the vibrations present. These vibrations produce sound from the drive. These vibrations also cause damage to the drive. High sound production is a precursor to a drive breaking down. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive with high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes into its own! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current when starting the motor. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM units can run very slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Running slowly is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point layouts with a long train! 4. The quality of the ICM drive has been demonstrated many times with the Dekas and MCK locomotives and units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component of the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with the MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front and tail lighting and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The units are supplied with many (metal) details. The Exact-Train standard of carrying everything out properly applies here again. The units will be fitted with a very detailed interior and will negotiate a curve radius of R1 with ease. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM units.
On order, lead time to be confirmed
In the 70s/80s/90s of the last century, NS purchased 144 ICM multiple units. (94 three-car units and 50 four-car units) These units feature a distinctive full-width cab. The ICM units can be found throughout the country in intercity services. In 1994, the ICM units were equipped with snowploughs. Between 2006 and 2011, the units also underwent a major overhaul. During this overhaul, the units were fitted with air conditioning, a passenger information system, and new windows. Additionally, the full-width cabs were taken out of service during this overhaul. The ICM units are regularly advertised. Exact-Train will realise all (colour) variants and all advertising variants. Technically, Exact-Train has built up an excellent reputation in recent years. The quality, assembly, running characteristics, detailing, and finish are at the highest level! We work hard every day to maintain this. For this reason, our first motor-driven train has been carefully prepared. In collaboration with MCK and Dekas, a proprietary drive has been developed that has proven itself for many years. The advantages of this drive are: 1. The ICM drive is silent. Explanation: The quality and condition of the drive are determined by the vibrations present. These vibrations indicate the sound production of a drive. These vibrations also cause damage to the drive. High sound production is a precursor to drive failure. Drives with high sound production therefore have a short lifespan. For this reason, Exact-Train chooses a drive of high quality. You will then enjoy your train for years! Moreover, with low sound production, the sound from the sound system comes through better! 2. The ICM drive has a low starting speed. Explanation: A low starting speed is only possible with a well-balanced drive with low starting torque. This is only possible with high-quality drives! A low starting speed causes much lower current during motor start-up. This means the motor wears out much less. That is the preservation of your ICM. 3. The ICM units can run particularly slowly and are equipped with a powerpack. (Rechargeable battery) Explanation: Slow running is only possible with a particularly well-executed drive. The ICM drive has these qualities! The powerpack also provides very stable running behaviour. This running behaviour is also present when running through complex point routes with a long train! 4. The quality of the ICM drive has been demonstrated many times with the Dekas and MCK locomotives and units! All model railway magazines praise this drive in tests and rank it among the absolute top! Digital technology is an increasingly important component within the model railway hobby. Exact-Train also wants to be among the best in this area. Exact-Train will make use of the experience gained with the MCK and Dekas locomotives. The following can be expected: 1. ESU decoders have been chosen. 2. Authentic sound that comes into its own even more thanks to the low-noise motor. 3. Many sound functions! 4. Switchable interior, cab, front, and tail lighting, and illuminated destination boards. 5. MFX technology with and without sound is also our standard for AC operation. The units are executed with many (metal) details. The Exact-Train standard of executing everything properly applies here again. The units will be fitted with a very detailed interior and will negotiate a curve radius R1 effortlessly. Finally, our local retailer will be happy to advise and support you on the ICM. In short: Exact-Train aims to set the highest standard for motor-driven trains with the ICM units.
On order, lead time to be confirmed