Rolling Stock
Here, the main interest for Era III and later lies in three types: K2, K3 and K4. The K2 and K3 were built over many years (the K2 since 1900, the K3 since 1913), and they exist – with identical main dimensions – in various versions with different wheelbases. The SBB kept the partially obsolete classes in service for a long time, so that the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, so various buffer, door variants and wheelsets are available, which enable a variety of variants through the eras. Model features New tooling Consideration of all era-specific differences Many separately applied details Close coupling with NEM coupling pocket Extensive, multi-colour printing Partially spoked wheels Length over the buffers: 61.5 mm
In stock: 1 on the shelf, shipped within 1-3 days
Between 1918 and 1923, the SBB ordered more than 1000 open L6-type goods wagons. They were initially used for transporting coal as well as other weather-sensitive goods. The L6 wagons were built with wooden and steel walls, both with and without a brake cabin. Based on the L6, the SBB also ordered wagons with raised side walls for transporting logs and scrap metal. A total of 318 units of the wagon classified as Fbkk were built. Model features New tooling Consideration of all design differences With and without brake cabin (L6) Applied etched parts Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
Over 1,000 open wagons of the L6 type were procured by the SBB between 1918 and 1923. They were initially used for the transport of coal, as well as for other weather-sensitive goods. The L6 wagons were built with wooden and steel walls, and with and without a brake cabin. Based on the L6, the SBB procured wagons with raised side walls for the transport of logs and scrap metal. 318 units of the wagon classified as Fbkk were built. Model features New tooling Consideration of all design differences With and without brake cabin (L6) Applied etched parts Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
Two-axle wagon with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious wagon is equipped with sliding walls that can be moved by one person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle transport of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are used in different versions by DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of the type differences, e.g. door mechanism, GPS antenna, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket Length over the buffers: 95.6 mm
In stock: 1 on the shelf, shipped within 1-3 days
This six-metre-long high-capacity sliding-wall van is equipped with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive, this spacious wagon features sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This wagon is designed for the careful transport of highly sensitive goods of various kinds, using the "lockable bulkheads" transport protection system. With these transport protection systems, the wagon interior can be divided into individual compartments. The wagons are in service with various operators, including DB Cargo, SBB Cargo, PKP Cargo, SNCF, and FS. Some of the SBB wagons are particularly striking due to full-page comic-style graffiti. Our model takes into account the design differences between the DB and SBB versions.
In stock: 1 on the shelf, shipped within 1-3 days
Six-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious wagon is fitted with sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is thus possible from both a ramp and ground level. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle carriage of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are in service with DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS in various versions. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of the type differences, e.g. door mechanism, GPS antenna, etc. Applied etched parts, filigree grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket Length over the buffers: 95.6 mm
In stock: 1 on the shelf, shipped within 1-3 days
Starting in 1941, the Waggonfabrik Uerdingen, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were supplied to almost all European railway administrations and were used in Germany, in some cases, well into the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
Starting in 1941, the Uerdingen Wagon Factory, together with several other companies such as MAN, built over 3,700 lightweight tank wagons. The two-axle wagons had a capacity of 30 m³. During the Second World War, the wagons were supplied to almost all European railway administrations and, as in Germany, were still used in some cases well into the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
Starting in 1941, the Waggonfabrik Uerdingen, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were supplied to almost all European railway administrations and were used in Germany, in part, until the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
Starting in 1941, the Uerdingen Wagon Factory, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were supplied to almost all European railway administrations and, as in Germany, were still used in some cases well into the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
The Swiss Wagon and Elevator Factory in Schlieren (SWS) manufactured thirty high-capacity coaches of the UIC-Z1 type for the SBB between 1980 and 1981. The coach was strongly based on the Eurofima coaches, but differed from them in several respects – the second-class coaches featured row seating in a 2+2 arrangement, as well as the large, wide windows previously found on first-class coaches. The coaches, designated Bpm 20-70 by the SBB, were primarily used in international traffic and received all the SBB colour schemes, from Eurofima orange, via grey/stone grey, to the current black and white livery. From 1999, the coaches were converted for domestic use and received new face-to-face seating. In 2016, 25 of these coaches were sold to the Czech railway company Regiojet.
In stock: 1 on the shelf, shipped within 1-3 days
The Swiss Wagon and Elevator Works in Schlieren (SWS) manufactured thirty high-capacity coaches of the UIC-Z1 type for the SBB between 1980 and 1981. The coach was strongly based on the Eurofima coaches but differed from them in several respects – the second-class coaches featured row seating in a 2+2 arrangement, as well as the large, wide windows previously found on first-class coaches. The coaches, designated Bpm 20-70, were used by the SBB primarily in international traffic and received all the SBB colour schemes, from Eurofima orange, via grey/stone grey, to the current black and white livery. From 1999, the coaches were converted for domestic use and received new face-to-face seating. In 2016, 25 of these coaches were sold to the Czech railway company Regiojet.
In stock: 1 on the shelf, shipped within 1-3 days
The Swiss Wagon and Elevator Factory in Schlieren (SWS) manufactured thirty high-capacity coaches of the UIC-Z1 type for the SBB between 1980 and 1981. The coach was strongly based on the Eurofima coaches but differed from them in several respects – the second-class coaches featured row seating in a 2+2 arrangement, as well as the large, wide windows previously found on first-class coaches. The coaches designated Bpm 20-70 were used by the SBB primarily in international traffic and received all SBB colour schemes, from Eurofima orange, via grey/stone grey, to the current black and white livery. From 1999, the coaches were converted for domestic use and received new face-to-face seating. In 2016, 25 of these coaches were sold to the Czech railway company Regiojet.
In stock: 1 on the shelf, shipped within 1-3 days
For the SBB’s Bahn 2000 project, BBC and SLM built four prototypes of a four-axle electric locomotive constructed in lightweight steel. The locomotives, designated Re 4/4 IV by the SBB, were extensively tested by the SBB from 1982 onwards. With these 160 km/h fast locomotives, not only was the new rectifier technology tested, but also new colour schemes – all four machines received different paint schemes. It was not until 1986 that the Re 4/4 IVs received a uniform colour scheme in traffic red with the Bahn 2000 advertising. From 1994, the Südostbahn (SOB) took over the locomotives, listed as Re 446, and turned them into moving billboards. With the introduction of the Stadler Flirt at the SOB in 2019, all Re 4/4 IVs were sold to the EDG. Model features: - Current pick-up via all axles - Swiss lighting changeover - Prepared for or including sound - NEM 651 interface - Consideration of all design differences
In stock: 1 on the shelf, shipped within 1-3 days
For the SBB’s Bahn 2000 project, BBC and SLM built four prototypes of a four-axle electric locomotive constructed in lightweight steel. The locomotives, designated Re 4/4 IV by the SBB, were extensively tested by the SBB from 1982 onwards. With these 160 km/h fast locomotives, not only was the new rectifier technology trialled, but new colour schemes were also introduced – all four machines received different paint finishes. It was not until 1986 that the Re 4/4 IV received a uniform colour scheme in traffic red with the Bahn 2000 advertising. From 1994, the Südostbahn (SOB) took over the locomotives, listed as Re 446, and turned them into moving billboards. With the introduction of the Stadler Flirt at the SOB in 2019, all Re 4/4 IV were sold to the EDG. Model features: - Current pick-up from all axles - Swiss lighting changeover - Prepared for sound / including sound - NEM 651 interface - Consideration of all design differences
In stock: 1 on the shelf, shipped within 1-3 days
For the SBB’s Bahn 2000 project, BBC and SLM built four prototypes of a four-axle electric locomotive constructed in lightweight steel. The locomotives, designated Re 4/4 IV by the SBB, were extensively tested by the SBB from 1982 onwards. These 160 km/h locomotives were used not only to test new rectifier technology but also new colour schemes – all four machines received different paint schemes. It was not until 1986 that the Re 4/4 IVs received a uniform colour scheme in traffic red with Bahn 2000 advertising. From 1994, the Südostbahn (SOB) took over the locomotives, registered as Re 446, and turned them into moving billboards. With the introduction of the Stadler Flirt at the SOB in 2019, all Re 4/4 IVs were sold to the EDG. Model features: - Current pick-up via all axles - Swiss lighting changeover - Prepared for sound / sound included - NEM 651 interface - Consideration of all design differences
In stock: 1 on the shelf, shipped within 1-3 days
For the SBB’s Bahn 2000 project, BBC and SLM built four prototypes of a four-axle electric locomotive constructed in lightweight steel. The locomotives, designated Re 4/4 IV by the SBB, were extensively tested by the SBB from 1982 onwards. These 160 km/h locomotives were used not only to trial new rectifier technology but also to test new colour schemes – all four machines received different liveries. It was not until 1986 that the Re 4/4 IVs received a uniform colour scheme in traffic red with the Bahn 2000 advertising. From 1994, the Südostbahn (SOB) took over the locomotives, listed as Re 446, and turned them into moving billboards. With the introduction of the Stadler Flirt at the SOB in 2019, all Re 4/4 IVs were sold to the EDG. Model features Current pick-up from all axles Swiss lighting changeover Prepared for or including sound (Zimo sound board) NEM 651 interface Consideration of all design differences Running number: 91 85 4 446 016-8 CH-SOB The vehicle looks as it did in 2018.
In stock: 1 on the shelf, shipped within 1-3 days
BBC and SLM built four prototypes of a four-axle electric locomotive in lightweight steel construction for the SBB's Bahn 2000 project. The locomotives, designated Re 4/4 IV by the SBB, were extensively tested by the SBB from 1982. The 160 km/h fast locomotives were used not only to test new rectifier technology but also new colour schemes – all four machines received different paint schemes. It was not until 1986 that the Re 4/4 IV received a uniform colour scheme in traffic red with the Bahn 2000 advertising. From 1994, the Südostbahn (SOB) took over the locomotives, listed as Re 446, and turned them into moving billboards. With the introduction of the Stadler Flirt at the SOB in 2019, all Re 4/4 IV were sold to the EDG. Model features Current pick-up from all axles Swiss lighting changeover Prepared for or including sound (Zimo sound board) NEM 651 interface Consideration of all design differences Running number: 91 85 4 446 017-6 CH-SOB The vehicle looks as it did in 2018.
In stock: 1 on the shelf, shipped within 1-3 days
The latest member of the Vectron family – the Vectron Dual Mode – combines the advantages of a full-sized diesel locomotive with those of electric locomotives. Thanks to its powerful diesel drive and its equipment for using the overhead line, the locomotive can flexibly respond to traction requirements at any time. In cities and metropolitan areas, environmental impact is becoming increasingly important. The Vectron Dual Mode makes a significant contribution to sustainable freight transport. DB Fernverkehr also decided to purchase the Dual Mode in 2024 and will use it on some InterCity lines in the coming years. Model features Current pick-up from all axles 2 traction tyres NEM 662 / Next 18 interface White/red lighting changeover, switchable off Includes ESU Loksound 5 micro sound decoder Etched side and roof grilles LÜP 124.3 mm Running number: 90 80 2248 501-9 D-DB The vehicle looks as it did in 2024. Design study
In stock: 1 on the shelf, shipped within 1-3 days
Six-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When it comes to delicate loads: this spacious wagon is fitted with sliding walls that can be operated by one person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle carriage of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are in service with DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS in various versions. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
Much to the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even contemplation. A series of large-scale motifs has been used to decorate numerous Hbbillns type sliding-wall vans of the SBB. The series “Zukunft ist Luxus” (The Future is Luxury) created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the “Wholecars”, all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall van is printed on both sides in an absolutely authentic and prototypical manner. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, filigree grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
In stock: 1 on the shelf, shipped within 1-3 days
SNCF, 2-unit pack of 4-axle isolated tank wagon TOTAL France, black livery. H0 scale (1:87). Minimum radius 356.5 mm. Close coupler mechanism.
In stock: 1 on the shelf, shipped within 1-3 days
RhB passenger train consisting of a Ge 6/6 I Crocodile electric locomotive (number 415), a luggage van, one first-class EW I coach and two second-class EW I coaches. The locomotive carries the brown colour scheme, while the coaches are painted green. They reflect the condition of the early 1980s. In 1921 the RhB acquired six machines designated Ge 6/6, followed by 15 more locomotives up to 1929. Because of their shape and construction and their similarity to the SBB Crocodiles, the locomotives are also known as the Rhaetian Crocodile. The Ge 6/6 I was used on scheduled freight services as well as on passenger trains. The two locomotives with running numbers 414 and 415 have been preserved in working order and are still regularly in service. The Kato model at a scale of 1/150 runs on standard N gauge track and has a delicate running gear with rod drive and a headlight changing over with the direction of travel. Matching interior lighting for the passenger coaches: K11-211/K11-212 Minimum radius for operation: 150 mm
In stock: 1 on the shelf, shipped within 1-3 days
Four-piece coach set of the Rhaetian Railway for the Glacier Express with adapted interior details.
In stock: 1 on the shelf, shipped within 1-3 days