Rolling Stock
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. This is particularly important for assistance vehicles or in maintenance, where time is a crucial factor. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Users of the 2-way version of the carrier include not only railway companies but also operators of metro systems and urban and light rail systems, as well as contractors in track construction and line maintenance. One of the largest manufacturers of two-way systems in Germany is Zagro from Bad Rappenau. Zagro exports its vehicles worldwide. Model features New tooling First time for Gauge N Continuous white/red light Switchable all-round lights DC/DCC board by Zimo for use on analogue and digital layouts Buffer capacitor Metal chassis 2 axles powered Coupling with NEM pocket at the rear of the model
Pre-order, release expected in December 2026
The coach set reproduces the F train F15/16 Sachsenross from the 1957 timetable. The train consists of two coaches of the A4ümg type and one AR4ümg of the Deutsche Bundesbahn. Model features authentic train route detailed interior details elaborate printing inside and out limited edition
Pre-order, release expected in December 2027
The coach set reproduces the F train F15/16 Sachsenross from the 1957 timetable. The train consists of two coaches of the A4ümg type and one AR4ümg coach of the Deutsche Bundesbahn. Model features authentic train route detailed interior details elaborate printing inside and out limited edition
Pre-order, release expected in December 2026
The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the valley railway between Garmisch-Partenkirchen and Grainau, from where the steep section to the Zugspitze transitions into a rack railway. Currently, valley locomotives 1 and 4 and the four-axle coaches remain in service. Model features Coach including interior lighting and, depending on the version, front lighting Length per coach 128mm
On order, lead time to be confirmed
The original “Bayrische Zugspitzbahn” AEG Tal-Lok and 2 coaches The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the valley railway between Garmisch-Partenkirchen and Grainau, from where the steep section leads up to the Zugspitze, transitioning into a rack railway. Currently, valley locomotives 1 and 4 as well as the four-axle coaches remain in service. Locomotive features Alternating white light Next 18 interface High level of detail in a finely detailed version Length over the couplings: 78 mm Due to the changed chassis of the H0 version, the installation of a gear for rack-and-pinion drive is not possible! COACHES Includes interior lighting with buffer capacitor Next 18 interface for the digital control of the interior lighting Switchable headlights that change over with the direction of travel High level of detail in a finely detailed version Length over the couplings: 128 mm Limited edition!
On order, lead time to be confirmed
The original “Bayrische Zugspitzbahn” AEG Tal-Lok and 2 coaches The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the valley railway between Garmisch-Partenkirchen and Grainau, from where the steep section leads up to the Zugspitze, transitioning into a rack railway. Currently, valley locomotives 1 and 4, as well as the four-axle coaches, remain in service. Locomotive features Alternating white light Next 18 interface High level of detail in a finely detailed version Length over the couplings: 78 mm Due to the modified chassis of the H0 version, the installation of a gear for rack-and-pinion drive is not possible! COACHES Includes interior lighting with buffer capacitor Next 18 interface for digital control of the interior lighting Switchable headlight that changes with the direction of travel High level of detail in a finely detailed version Length over the buffers: 128 mm Limited edition!
On order, lead time to be confirmed
The original “Bayrische Zugspitzbahn” AEG Tal-Lok and 2 coaches The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the valley railway between Garmisch-Partenkirchen and Grainau, from where the steep section leading to the Zugspitze transitions into a rack railway. Currently, valley locomotives 1 and 4 as well as the four-axle coaches remain in service. Locomotive features Alternating white light Next 18 interface High level of detail in finely detailed version Length over the couplings: 78 mm COACHES Includes interior lighting with buffer capacitor Next 18 interface for digital control of the interior lighting Direction-dependent switchable headlights High level of detail in a finely detailed version Length over the couplings: 128 mm Limited edition!
On order, shipped within 4-5 days
The original “Bayrische Zugspitzbahn” AEG Tal-Lok and 2 coaches The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the valley railway between Garmisch-Partenkirchen and Grainau, from where the steep section to the Zugspitze transitions into a rack railway. Currently, valley locomotives 1 and 4 as well as the four-axle coaches remain in service. Locomotive features Alternating white light Next 18 interface High level of detail in finely detailed version Length over the couplings: 78 mm COACHES / WAGONS Includes interior lighting with buffer capacitor Next 18 interface for the digital control of the interior lighting Directional headlights High level of detail in a finely detailed version Length over the couplings: 128 mm Limited edition!
On order, lead time to be confirmed
The original “Bayrische Zugspitzbahn” AEG Tal-Lok and 2 coaches The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the valley railway between Garmisch-Partenkirchen and Grainau, from where the steep section leading to the Zugspitze transitions into a rack railway. Currently, valley locomotives 1 and 4 as well as the four-axle coaches remain in service. Locomotive features Alternating white light Next 18 interface High level of detail in a finely detailed version Length over the buffers: 78 mm COACHES Includes interior lighting with buffer capacitor Next 18 interface for the digital control of the interior lighting Directional headlights High level of detail in a finely detailed version Length over the couplings: 128 mm Limited edition!
On order, lead time to be confirmed
The Bavarian Zugspitze Railway of the Bavarian Zugspitze Mountain Railway AG is, alongside the Wendelstein Railway, one of the oldest mountain railways in Germany. The line runs from Garmisch-Partenkirchen directly up to the Zugspitze, the highest mountain in Germany. The route begins with the lower section between Garmisch-Partenkirchen and Grainau, from where the steep section leading to the Zugspitze transitions into a rack railway. Currently, the lower section locomotives 1 and 4 and the four-axle coaches remain in service. Model features Coach including interior lighting and, depending on the version, front lighting Length per coach 128mm
On order, lead time to be confirmed
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. Time is particularly an important factor for assistance vehicles or in maintenance. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Among the users of the carrier in two-way version, in addition to railway companies, are operators of metro systems and urban and tramways, as well as contractors in track construction and line maintenance. One of the largest manufacturers in Germany of two-way systems is Zagro from Bad Rappenau. Zagro exports its vehicles around the world. Model features New tooling For the first time in H0 gauge Permanent white/red headlights Switchable marker lights Zimo DC/DCC circuit board for use on analogue and digital layouts Optional with sound Buffer capacitor Metal chassis 2 axles powered Coupling with NEM pocket at the rear of the model
Pre-order, release expected in September 2027
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. Time is particularly an important factor for assistance vehicles or in maintenance. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Users of the carrier in two-way version include, in addition to railway companies, operators of metro systems and urban and tramways, as well as contractors in track construction and line maintenance. One of the largest manufacturers in Germany of two-way systems is Zagro from Bad Rappenau. Zagro exports its vehicles worldwide. Model features New tooling First time for Gauge H0 Permanent white/red headlight Switchable all-round lights DC/DCC board by Zimo for use on analogue and digital layouts Optional with sound Buffer capacitor Metal chassis Drive on both axles Coupling with NEM pocket at the rear of the model
Pre-order, release expected in September 2027
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. This is particularly important for assistance vehicles or in maintenance, where time is a crucial factor. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Users of the 2-way version of the carrier include not only railway companies but also operators of metro systems and urban and light rail systems, as well as contractors in track construction and line maintenance. One of the largest manufacturers of two-way systems in Germany is Zagro from Bad Rappenau. Zagro exports its vehicles worldwide. Model features New tooling First time for Gauge H0 Permanent white/red headlights Switchable all-round lights DC/DCC board by Zimo for use on analogue and digital layouts Optional with sound Buffer capacitor Metal chassis 2 axles powered Coupling with NEM pocket at the rear of the model
Pre-order, release expected in September 2027
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. This is particularly important for assistance vehicles or in maintenance, where time is a crucial factor. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Users of the 2-way version of the carrier unit include not only railway companies but also operators of metro systems and urban and light rail networks, as well as contractors in track construction and line maintenance. One of the largest manufacturers of two-way systems in Germany is Zagro from Bad Rappenau. Zagro exports its vehicles worldwide. Model features New tooling First time for Gauge H0 Permanent white/red headlights Switchable all-round lights DC/DCC board by Zimo for use on analogue and digital layouts Optional with sound Buffer capacitor Metal chassis 2 axles powered Coupling with NEM pocket at the rear of the model
Pre-order, release expected in September 2027
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. Time is particularly an important factor for assistance vehicles or in maintenance. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Users of the carrier in two-way version include not only railway companies but also operators of metro systems and urban and tramways, as well as contractors in track construction and line maintenance. One of the largest manufacturers in Germany of two-way systems is Zagro from Bad Rappenau. Zagro exports its vehicles worldwide. Model features New tooling First time for Gauge H0 Permanent headlight white/red Switchable all-round lights DC/DCC board by Zimo for use on analogue and digital layouts Optional with sound Buffer capacitor Metal chassis Drive on both axles Coupling with NEM pocket at the rear of the model
On order, lead time to be confirmed
The Unimog on rail and road. Two-way vehicles have the advantage over rail-only vehicles of being able to be quickly moved to the site of deployment. This is particularly important for assistance vehicles or in maintenance, where time is a crucial factor. The two-way Unimog is used as a shunting vehicle, in track and overhead line maintenance, and for work on and along the line. Users of the 2-way version of the carrier unit include not only railway companies but also operators of metro systems and urban and light rail systems, as well as contractors in track construction and line maintenance. One of the largest manufacturers of two-way systems in Germany is Zagro from Bad Rappenau. Zagro exports its vehicles worldwide. Model features New tooling First time for Gauge H0 Permanent headlights white/red Switchable marker lights DC/DCC board by Zimo for use on analogue and digital layouts Optional with sound Buffer capacitor Metal chassis 2 axles powered Coupling with NEM pocket at the rear of the model
Pre-order, release expected in September 2027
Six-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious wagon is fitted with sliding walls that can be operated by one person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is thus possible from both a ramp and ground level. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle carriage of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are in service in various versions with DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, delicate grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Six-plank covered van Six-plank covered van with two-part aluminium sliding walls and six lockable bulkheads. When it comes to sensitive loads: this spacious van is equipped with sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This van is designed for the gentle transport of highly sensitive goods of various kinds, featuring the “lockable bulkheads” transport protection system. With transport protection systems, the van body can be divided into individual compartments. The vans are in service with various operators, including DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB vans are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
On order, shipped within 4-5 days
The Prototype: Based on the design of the coaches supplied to the Deutsche Bundesbahn, Josef Meyer AG in Rheinfelden produced a total of 600 sliding-wall vans for the SBB between 1990 and 1994. The Italian and Polish state railways also operate this type of wagon. Later, the coaches were converted with plastic brake soles to reduce noise. Some coaches were used as advertising carriers and received full-body advertisements. - Complete new tooling - Consideration of design differences, e.g. door mechanism - Various GPS antennas - Applied etched parts, filigree grab rails - Metal chassis with smooth-running axles - Close coupling with NEM coupling pocket - Minimum radius: 358 mm
On order, shipped within 4-5 days
Two-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. This high-capacity wagon is equipped with sliding walls that can be operated by one person, making it ideal for delicate loads. When open, the entire loading area is accessible from both sides, allowing forklift loading and unloading from either a ramp or ground level. The wagon is designed for the gentle transport of highly sensitive goods of various kinds, using the “lockable bulkheads” transport protection system. This system allows the wagon interior to be divided into separate compartments. These wagons are in service with DB Cargo, SBB Cargo, PKP Cargo, SNCF, and FS. Some SBB wagons are particularly striking due to full-side comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
On order, shipped within 4-5 days
To the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even thought. A series of large-scale motifs has been applied to numerous Hbbillns sliding-wall wagons of the SBB. The series "The Future is Luxury" created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the "Wholecars", all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall wagon is printed on both sides with absolutely authentic and prototypical lettering. Model features Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
Pre-order, release expected in June 2027
Graffiti on rolling stock To the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even thought. A series of large-scale motifs has been applied to numerous Hbbillns sliding-wall wagons of the Swiss Federal Railways (SBB). The “Zukunft ist Luxus” series features various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the “Wholecars”, all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall wagon is printed on both sides in an absolutely authentic and prototypical manner. Model features Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, delicate grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
Pre-order, release expected in June 2027
To the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even thought. A series of large-scale motifs has been applied to numerous Hbbillns sliding-wall wagons of the SBB. The series "The Future is Luxury" created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the "Wholecars", all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall wagon is printed on both sides in an absolutely authentic and prototypical manner. Model features Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
Pre-order, release expected in June 2027
Much to the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even thought. A series of large-scale motifs has been used to decorate numerous Hbbillns sliding-wall wagons of the SBB. The series “The Future is Luxury” created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the “Wholecars”, all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall wagon is printed on both sides in an absolutely authentic and prototypical manner. Model features Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
Pre-order, release expected in June 2027