Rolling Stock
Electric locomotive 193 658 of MRCE, leased to SBB Cargo International, named “Vierwaldstättersee” (Railcolor design, names and outlines of Swiss lakes at the four corners). Finely detailed model with four roof pantographs and free-standing grab rails, some made of metal. In digital operation, switchable long-distance headlight as well as individually switchable headlights/tail lamps and cab lighting. DC, sound decoder (PluX22), 4 axles powered, 1 traction tyre, flywheel, buffer capacitor, LED lighting, NEM-362 coupling with close coupling mechanism, minimum radius 358 mm, length over the buffers 218 mm, Era VI.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 186 906 “RAlpiercer” of the leasing company Akiem, rented out to SBB Cargo International. Baptised with the name “Katzenberg” Side walls feature different designs Service in international freight transport With separately attached plug-in parts, in part using etching technology Design with snow plough on the chassis Switchable headlight/tail light with DIP switch In cooperation with Railcolor Design The Akiem locomotives 186 901 – 910 have run for SBB Cargo International since December 2020, and are mainly used in RoLa transport between Freiburg and Novara. Due to this, all ten 186 locomotives bear the Ralpin AG lettering on one side and a revision of the existing Alppiercer design on the other. The “Katzenberg” emblem created especially for the locomotive depicts the south portal of the 9.38 km long tunnel, which is located just past the Swiss border and has been a part of the expansion project Basel - Karlsruhe since 2012, when it was put into operation. The Katzenberg tunnel between Bad Bellingen and Effringen Kirchen is one of many strategically important tunnel constructions on the North-South corridor of SBB Cargo International and RAlpin AG.
In stock: 1 on the shelf, shipped within 1-3 days
High-speed steam locomotive 18 201, coal-fired of the railway company of the German Democratic Republic (Deutsche Reichsbahn). Drive on two axles of the tender and via cardan shaft on all three locomotive driving axles. Edition model! Form variation! Update! Prototypical implementation of the design with coal firing For the first time with PluX16 interface and LED lighting Trim line with triple tip Finely-detailed metal wheelsets Smoke generator can be retrofitted The Halle Research Institute needed another high-speed steam locomotive to test new passenger coaches in the 1960s. The new engine 18 201 was created from high-speed tender locomotive 61 002 and parts of high-pressure test locomotive H 25 024. The steam generator was a modified new boiler construction of the class 22 with an extended smoke chamber and Giesl ejector. The machine was equipped with a counter-pressure brake to ensure that the speed was maintained precisely when travelling at high speed. Fast travel meant up to 175 km/h, because the 18 201 was initially approved for this maximum speed – later 180 km/h – but of course only forwards.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Steam locomotive class 89.70–75 of the German Federal Railway. Ideal locomotive for use on branch lines LED lighting Metal die-cast undercarriage With switchable sound functions From 1882 to 1910, approximately 1,550 tender locomotives of type T3 in different designs were supplied to the Prussian State Railway (K.P.E.V.) and other state railways. As type Cn2, the M III-4p design of the locomotive had a friction load of 36 tonnes and could travel at a maximum speed of 40 km/h with an output of 300 HPi. Around 70 locomotives remained with the German Federal Railway. The last locomotives were taken out of service around 1961.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Steam locomotive class PtL 2/2 "Glaskasten" of the Royal Bavarian State Railway. Model with authentic sound functions Authentic livery with fine decorative lines Used at the head of passenger and light goods trains on branch lines The local railway locomotive designated PtL 2/2 (a passenger tender locomotive for branch lines) is undoubtedly one of the most iconic steam engines of the past, especially among railway enthusiasts. Affectionately known by regional nicknames such as 'Glaskastl,' 'Schnauferle,' 'Quietscherle,' and 'Bockl,' it holds a special place in railway history. With a rated power output of 210 hp, it was officially approved for a top speed of 40 km/h: though, according to accounts from train drivers, it often reached 60 km/h or more in actual service.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Steam locomotive 230 F 607 of the National French Railways. Edition model! Form variation! Design featuring short chimney Finely-detailed model with many separately attached plug-in parts Wheels with fine spokes Design with rivet tender and Wagner smoke deflectors Driver’s cab and valve gear lighting installed, switchable in digital mode The P 8 was a general-purpose locomotive, and was deployed for all kinds of trains. After the turmoil resulting from the two World Wars, they were used by almost all European railway administrations. They were to be found in Belgium, Denmark, France, Greece, Italy, Yugoslavia, Lithuania, Luxembourg, the Netherlands, Austria, Poland, Romania, Czechoslovakia and the Soviet Union. In 1919, 162 locomotives were sent to France, of which 25 went to AL, 25 to EST, 75 to NORD, 17 to ETAT (as 230.943-959, all 1940s phased out except for the 943) and 20 to MIDI. In 1945, the SNCF received four more machines as the spoils of war.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive double traction Re 10/10 of the Swiss Federal Railways. Tooling variant! ■ Anniversary edition of 1982 “100 Years Gotthard Railway” ■ Consisting of Re 6/6 11626 and Re 4/4ˡˡ 11323 ■ Both locomotives powered ■ With front crests and raised locomotive numbers ■ Fine, separately applied ventilation grilles and windscreen wipers made of etched metal To mark the 175th anniversary of the railway in Switzerland, ROCO presents as a special edition the Re 10/10 pair in anniversary version.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive Re 420 257 of the SBB Cargo. Elaborate printing Finely-detailed, separately attached ventilation grilles and windscreen wipers made from etched sheet Pantographs with invisible fastening Design with retrofitted air conditioning Light functions in accordance with the Swiss prototype Z21 driver’s cab available Since September 2020, the Re 420 257 has been advertising the environmentally-friendly collaborations in recycling economy between the companies SBB Cargo, ACTS and Spross. This recycling economy is characterised by the efficient use of raw materials for as long a period as possible. If material and product cycles are successfully closed, then raw materials can be repeatedly reused. Both the environment and the economy profit from this achievement.
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 193 491 of the logistics company Hupac Intermodal. ■ Finely detailed model with four pantographs ■ Prototypical with long rain gutters and high driver's cabs for use in Italy ■ Free-standing grab rails, partly in metal ■ In cooperation with Railcolor Design ■ Sound in cooperation with Leosoundlab The Swiss logistics company for combined transport Hupac ordered eight Vectron MS freight locomotives from Siemens.
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 475 902 of Widmer Rail Services (WRS). ■ Model exclusively available from ROCO ■ Intricate printing with a paper-cut motif ■ Prototypical with a long rain gutter and high driver’s cabs for use in Italy ■ Free-standing grab rails, partially made of metal ■ In digital operation, light functions can be switched according to the Swiss prototype. With the Vectron locomotives Re 475 901 and 902, Widmer Rail Services put two more multi-system locomotives into service.
In stock: 1 on the shelf, shipped within 1-3 days
Diesel locomotive 68540 of the French State Railways. Version as a museum locomotive Finely detailed ventilation grilles Triple headlights With set of etched coat of arms included Headlights/taillights switchable with a DIP switch Between 1963 and 1968, 29 locomotives of the A1A-A1A 68500 series were built for heavy passenger and freight transport for the French state railways (SNCF). They differed from the 80 units of the A1A-A1A 68000 series built in parallel only in their AGO V 12 DSHR engines from SACM, which, like their sisters with Sulzer 12 LVA 24 engines, had an output of 2,700 hp at the beginning of their service life. Over time, the SNCF converted A1A A1A 68000 into A1A A1A 68500 in its workshops by replacing the diesel engine to counteract the maintenance difficulties of the Sulzer engine, resulting in A1A A1A 68530 to 68540. The current locomotive with the running number 68540 was delivered to the SNCF in 1965. It was built by CAFL (mechanical part), CEM (electrical equipment) and CCM Sulzer (diesel engine) as A1A-A1A 68039. In December 2002, the Sulzer engine was replaced by an AGO V12 engine, which had an output of 2,150 hp compared to the Sulzer engine with 2,420 hp, and the locomotive was renumbered A1A-A1A 68540 accordingly. In 2011, the locomotive was entrusted by the SNCF to the AAATV Centre Val-de-Loire association, which returned it to its historic blue livery. In this condition, the locomotive is still in use to haul special trains.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Diesel locomotive Y 8208 of the French State Railways. Equipped with digital shunting coupling - more play fun guaranteed! Motor stem and gearbox manufactured from die-cast zinc, resulting in increased dead weight and higher tractive effort. Rich detailing on the model with many plug-in parts and free-standing grab rails Authentic light and sound functions switchable via onboard decoder Unobstructed view through the driver's cab Buffer capacitor for uninterruptible power supply In July 1977, the Y 8001 shunting locomotive, known in France as "Locotracteur", rolled out of the Moyse factory as the first in a series of 525 units built for shunting duties in stations, marshalling yards, construction sites, and SNCF workshops. More powerful and longer than their predecessors, these locomotives were also capable of replacing certain locomotives used for hauling light goods trains on main lines. Upon entering service, the Y 8000 series featured a livery inspired by that of the BB 63500, with orange as the dominant colour, accented by brown and white. Most units remained in this colour scheme throughout their service lives, bearing the full succession of SNCF logos up to the current "Carmillon". However, some were repainted to match the branding of specific SNCF divisions to which they were assigned, such as Fret, Infra, or even TER. Operation with analogue control equipment is limited.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Diesel railcar series ALn 448/460 of the Italian State Railways, two-part set. Update! First time with PluX22 interface and PluX22 sound decoder Conversion variant without kitchen Free-standing handrails Elaborately detailed interior and cabs Model with Televisore logo In digital operation, with switchable interior lighting For high-quality passenger services on diesel lines, the Italian State Railways (FS) acquired a total of 9 diesel multiple units of the ALn 442/448 series from the Italian manufacturer Breda. Until 1972 they were mainly used to replace locomotive-hauled TEE trains. Meals and drinks were prepared in a specially installed on-board kitchen and, because there was no restaurant section, were served to passengers directly at their seats. After their service as TEE trains, the units were converted, with the kitchen removed and seats installed in its place, which is why the designation also changed to ALn 448/460. They were used as express trains, mainly in southern Italy. The ALn were very popular with passengers above all because of their high level of comfort and short journey times (the multiple units could run at 140 km/h).
In stock: 1 on the shelf, shipped within 1-3 days
1st class passenger coach EW II of the Swiss Federal Railways. “Parrot” paintwork Visually revised model with fine detailing Elaborately designed entrance areas Realistic representation of the steps and roof engravings
In stock: 1 on the shelf, shipped within 1-3 days
1st class fast train coach EW II type A of the Swiss Federal Railways. Scale model with interior design equipped ready to install interior lighting. Coupler pocket according to NEM 362 standards and close coupling mechanism. Visually revised model with fine detailing Completely revised train access Precise illustration of steps and handles Detailed illustration of the roof engravings
In stock: 1 on the shelf, shipped within 1-3 days
2nd class fast train coach EW II type B of the Swiss Federal Railways. Scale model with interior design equipped ready to install interior lighting. Coupler pocket according to NEM 362 standards and close coupling mechanism. Viually revised model with fine detailing Completely revised train access Precise illustration of steps and handles Detailed illustration of the roof engravings The items 74571 and 74573 have modified running numbers.
In stock: 1 on the shelf, shipped within 1-3 days
1st class Eurocity coach, type Apm, of the Swiss Federal Railways. In the new design with red doors
In stock: 1 on the shelf, shipped within 1-3 days
1st class passenger coach "Halberstädter", type Am 201, of the Deutsche Bahn. In DB Regio livery mint turquoise/pastel turquoise/light grey Side walls with continuous rain gutter Modified Görlitz V type bogies Free-standing handrails Buffer beam can be retrofitted
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 420 268 of the Rhomberg Sersa Rail Group. Former SBB Cargo locomotive 2nd construction series of the Re 4/4 II Different positions of the UIC sockets Pantograph with an innovative fastening Headlights switchable with a DIP-switch Z21 driver's cab available The Swiss railway technology group Sersa AG specialises in the superstructure of railways. Its classic core activities include track construction and maintenance, as well as the construction of overhead contact lines and electrical systems, measurement systems for railway lines and project management for railway technology projects. The company operates its own fleet of locomotives, infrastructure vehicles and special goods wagons.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 1043 002 of the Österreichische Bundesbahnen. ■ Version in the last operating condition around 1999 with computer number ■ With roof and frame painted in umbra grey ■ Upper decorative line only above the driver's cabs ■ The headlight can be switched on using a DIP switch. To meet the ÖBB's wish for the rapid delivery of new locomotives for freight traffic on the Tauernbahn, four locomotives were diverted from a series of the Swedish Type Rc 2 that was under construction.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive Re 465 008 of the Swiss railway company BLS. Elaborately printed model in "Golden Pass" design With extra attached windscreen wipers Fine depiction of the front grab rails Headlight/tail light switchable with a DIP switch The Bern–Lötschberg–Simplon Railway (BLS) ordered an advanced universal locomotive based on the SBB Re 460 from the Swiss manufacturers SLM Winterthur and ABB Zurich, under the series designation 465. Unlike the Re 460, these locomotives have one inverter per axle rather than only one per bogie. This allows the tractive power to be optimally transferred to the rails. BLS uses the 18 locomotives primarily for freight transport, but also in front of commuter trains.
- 2-rail, direct current
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive BB 22238 of the National French Railways. Delicately crafted pantograph design “Ouigo” design Finely-detailed model with many separately attached plug-in parts, in part using etching technology Perforated steps Switchable headlight according to the French prototype and driver’s cab lighting in digital mode In April 2013, the National French Railways (SNCF) launched a new TGV range of high-speed trains called “OUIGO” [wiˈɡo]. The inexpensive TGV connections proved so successful that it was decided to apply the same concept to traditional train connections. The first “OUIGO Classic” relations were launched onto the rails in spring 2022. Nine locomotives from the series BB 22200 hauled the trains and received the conspicuous foil applications. 2nd class Corail coaches were used as rolling stock. During the course of the redesign, these were each provided with a storage space big enough for two bicycles at one end.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 420 268 of the Rhomberg Sersa Rail Group. Former SBB Cargo locomotive 2nd construction series of the Re 4/4 II Different positions of the UIC sockets Pantograph with an innovative fastening In digital operation with separately switchable headlights/taillights, driver's cab and engine room illumination Z21 driver's cab available The Swiss railway technology group Sersa AG specialises in the superstructure of railways. Its classic core activities include track construction and maintenance, as well as the construction of overhead contact lines and electrical systems, measurement systems for railway lines and project management for railway technology projects. The company operates its own fleet of locomotives, infrastructure vehicles and special goods wagons.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
Electric locomotive 193 452 "Schweizpiercer" of the SBB Cargo International. Circuit board update! Execution of the pilot and bogie covers according to the XLoad locos Named "Helvetia" Multicoloured control panel and rear driver's cab wall With detailed roof design Used for cross-border goods traffic For the first time in digital mode with switchable light functions for CH, EU and IT In cooperation with Railcolor Design In April 2025, the last two XLoad Vectron locomotives that had not yet been vinyl-wrapped, 193 452 and 193 459, also received their wraps. This brings the total number of specially vinyl-wrapped XLoad units, previously differing from the standard design, to four. After the Netherlands and Italy, Germany and Switzerland have now joined the ranks with their own Piercer-themed locomotives at SBB Cargo International. Unlike the silver Italian Piercer, locomotive 193 452 features identical designs on both sides and showcases a range of motifs familiar from Switzerland.
- 2-rail, direct current
- Sound
In stock: 1 on the shelf, shipped within 1-3 days