Rolling Stock
Prototype Set consisting of three four-axle Erz Id open self-unloading hopper cars, type OOtz 44, of the German Federal Railroad (DB). Version with a very low upper body and a brakeman's platform. Used to transport iron ore. Standard design pressed sheet metal trucks with a welded-in underframe beam for reinforcement. Basic red-brown paint scheme. The cars look as they did starting in 1952. Model Detailed version with different car numbers. All cars with a brakeman's platform and a brake wheel on the end. Loaded with load inserts of real iron ore in a scale grain size. All cars individually packaged in an additional outer box. Length over the buffers 34.5 cm. DC wheel set E700580. Highlights Loaded with real iron ore
In stock: 3 on the shelf, shipped within 1-3 days
Prototype 5 two-axle goods wagons of different designs. 1 covered goods wagon J2d with a brake cabin of the BLS. 1 covered goods wagon J3 with a brake cabin of the SBB. 1 covered goods wagon Typo F "Spitzdach" of the FS. 1 tank wagon as a privately owned wagon of the firm ERPAG AG, Basel. 1 covered goods wagon G 10 "München" of the DB. All of the wagons look as they did at the end of the 1940s / the beginning of the 1950s. Model The covered goods wagons J2d, J3, and G10 have sliding doors that can be opened. The tank wagon has a separately applied brake platform and steps. All of the wagons are individually packaged and marked. With an additional outer box. Total length over the buffers 58.5 cm. DC wheelset E700580 for each wagon. Highlights Matching goods wagons for the new tooling of the Ae 6/8 electric locomotive. Era-appropriate wagon consist Note The matching Ae 6/8 electric locomotive can be found in the Märklin H0 assortment under item no. 38680.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: Open goods wagon of the Eaos type for the Swiss Federal Railways (SBB/CFF/FFS). Operating condition: The vehicle looks as it did around 1991.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Four-axle low-sided open wagon of the Res type of On Rail GmbH, Mettmann. European standard design with a length of 19.90 m. Version with steel side boards, folding stakes and square buffers. Golden yellow basic paint scheme. The wagon looks as it did starting in 2007. Model Specific version of the underbody. Many applied details such as folding stakes and handwheels for the parking brake. Y 25 type bogies. Wagon loaded with a ballast reproduction. Length over the buffers 22.9 cm. DC wheelset E700580. Highlights Wagon loaded with a "ballast" load insert Many separately applied details
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: 6-axle articulated double-pocket wagon, type Sdggmrss (T3000e), of Wascosa AG. Modern load-carrying wagon for intermodal freight transport. Basic paint scheme in light red orange. Version with four side folding locks. Operating condition starting in 2019. Loaded with four 20ft tank containers for the haulage company Bertschi.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: Two-axle sliding-roof wagon, type Tms 851. Private wagon of the company Fissler GmbH, Idar-Oberstein, registered with the Deutsche Bundesbahn (DB). Without brake cabin and without brake platform. The vehicle looks as it did around 1990.
In stock: 3 on the shelf, shipped within 1-3 days
Club members only (Märklin Insider)
Prototype Heavy-duty flat wagon of the SSym 46 type of the Deutsche Bundesbahn. Deep black basic paint scheme. The wagon looks as it did starting in the mid-1950s. Model Wagon made of metal. With steel slabs as load. Plug-in stakes are included. Length over the buffers 15.2 cm. DC wheelset E700580. Highlights With attractive load Wagon made of metal
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Six-axle heavy-duty wagon, type Samms 710, of the Deutsche Bahn AG. Basic paint scheme in traffic red. The wagon looks as it did from 2021 on. Model Metal frame. Many separately applied details. Three-axle special bogies. With a separately applied handwheel for the parking brake. Prepared for being driven on by Viessmann CarMotion vehicles. Stakes and folded-up bridging flaps are included as separate plug-in parts. Length over the buffers 18.9 cm. DC wheelset E700580. Highlights Prepared for being driven on by Viessmann Car Motion vehicles Metal frame Many applied details
In stock: 3 on the shelf, shipped within 1-3 days
2 unladen tank transport wagons, type Slmmnps-y, without brake blocks. EXCLUSIVE MODEL SWITZERLAND
In stock: 3 on the shelf, shipped within 1-3 days
Wagon set 1 with two 6-axle articulated double-pocket wagons, series Sdggmrs/T2000. New design! Model exclusively available from ROCO For the first time with prototypical gangway for transhipment, fully functional for system operation Completely redesigned reefer container Elaborate refrigeration unit Wagons made of die-cast metal Fully-equipped model Art. no. 6600323: Changed company numbers The series will continue with further motifs The modern T2000 rail wagons from railCare, equipped with two permanently installed 45-foot refrigerated containers, replace the sliding-wall wagons previously in temporary use by SBB Cargo. They are specially designed for loading and unloading operations on railway ramps and offer a high level of practicality thanks to their sophisticated design. A three-part loading platform compensates for the height difference to the ramp, which enables maximum flexibility when loading and unloading with industrial trucks. With their noticeable Coop lettering, the wagons have become a familiar sight in Swiss freight traffic and can be seen travelling throughout the country almost every day.They can be used in a wide variety of train compositions and lengths thanks to their versatility. Only three wagons are needed to form a prototypical train in the model, which can be used behind SBB Cargo and BLS Cargo locomotives as well as behind the railCare Vectron "Coop". The longest pure T2000 trains are the so-called ‘water trains’ between Wangen bei Olten and Brig. Depending on demand, 12 to 13 carriages are in regular use.
Pre-order
Wagon set 2 with two 6-axle articulated double-pocket wagons, series Sdggmrs/T2000. New design! Model exclusively available from ROCO For the first time with prototypical gangway for transhipment, fully functional for system operation Completely redesigned reefer container Elaborate refrigeration unit Wagons made of die-cast metal Fully-equipped model Art. no. 6600322: Changed company numbers The series will continue with further motifs The modern T2000 rail wagons from railCare, equipped with two permanently installed 45-foot refrigerated containers, replace the sliding-wall wagons previously in temporary use by SBB Cargo. They are specially designed for loading and unloading operations on railway ramps and offer a high level of practicality thanks to their sophisticated design. A three-part loading platform compensates for the height difference to the ramp, which enables maximum flexibility when loading and unloading with industrial trucks. With their noticeable Coop lettering, the wagons have become a familiar sight in Swiss freight traffic and can be seen travelling throughout the country almost every day.They can be used in a wide variety of train compositions and lengths thanks to their versatility. Only three wagons are needed to form a prototypical train in the model, which can be used behind SBB Cargo and BLS Cargo locomotives as well as behind the railCare Vectron "Coop". The longest pure T2000 trains are the so-called ‘water trains’ between Wangen bei Olten and Brig. Depending on demand, 12 to 13 carriages are in regular use.
Pre-order
Double-deck control cab coach 2nd class, type Bt "IC2020", of the Swiss Federal Railways. With extra applied windscreen wipers and SBB logo Model with decoder for headlight/tail light switching The complete makeover of the IC2000 vehicle fleet is the most significant vehicle modernization in the history of long-distance traffic at the SBB. During the refurbishment and renewal of the interior, the new long-distance trains' colour and material concept is also applied to the IC2000 vehicle fleet. By converting the lighting to LED bulbs and new indirect light, the interior appears brighter and friendlier.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Four type EW III standard coaches of the Swiss Federal Railways (SBB/CFF/FFS). One type AD half-luggage coach, 1st class, one type WR restaurant car and two type B high-capacity coaches, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève-Lausanne-Bern-Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Completely new tooling for the EW III coach family. Multi-coloured interior details. All coaches with LED interior lighting fitted as standard. A buffer capacitor is installed in each coach to bridge over brief interruptions in power. Restaurant car with illuminated table lamps. One high-capacity coach has tail lighting fitted as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the specified vehicle sequence must be observed for this. There is a digital interface in the restaurant car for fitting a function decoder to control various light functions. Type-specific bogies, roof shapes, side walls and underframes with many applied details. Buffer height according to NEM. Separately applied vents, handrails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. An imitation of an automatic coupler is also included with the coach with car number 14. All coaches individually packaged in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approx. 113.2 cm. Highlights Completely new tooling for the EW III coach family For the "50 years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting fitted as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with illuminated table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height according to NEM
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Low-floor transport wagon, type Saadkms, of RAlpin AG (Olten), for the transit traffic of the "Rollende Landstraße". Quartz grey basic paint scheme. The wagon looks as it did starting in 2018. Model Wagon body of metal. Intermediate wagon without buffer beams. Chocks for lorry models and a special coupler for low-floor wagons are included. Length 21.4 cm. AC wheelset E363630. Highlights Wagon body of metal Intermediate wagon to extend the train consist
In stock: 3 on the shelf, shipped within 1-3 days
The RhB and the MGB ordered custom-built dual-mode electric/battery locomotives from Stadler for shunting and light freight duties. The seven Geaf 20601-20607 delivered in 2020 are superior to the old shunting locomotives they replace in terms of cost-effectiveness, environmental impact, susceptibility to faults, and noise and exhaust emissions. Radio remote control, the option of fitting an automatic coupling, and a spacious central cab are further features of this new generation of shunting locomotives. The RhB's procurement is based on the MGB's tender, which had previously undertaken the renewal of its vehicle fleet for shunting and railway service. In contrast to the RhB, however, the MGB is procuring various versions as needed, in the form of four plus one diesel locomotives with or without rack drive, as well as the two Tea 2/2 801-802, which are of identical design to the RhB locomotives, as electric/battery locomotives, to be stationed in Brig and Zermatt. Model details Small-series model in white metal and brass Drive and current pick-up via both axles Sound-ready Model variant: digital version with sound decoder LED headlight 3+1 white LED marker and shunting light function (digital model only) LED cab lighting (digital model only) LED step lighting (digital model only) Cannot be converted to H0e!
In stock: 2 on the shelf, shipped within 1-3 days
Pair of transporter bogies in kit form for H0m, black finish. Cannot be converted to H0e.
In stock: 2 on the shelf, shipped within 1-3 days
The company Furrer+Frey, active in overhead line construction on many Swiss metre-gauge railways, uses, among others, on the connected network of the RhB and MGB, the covered van P 10126 of the FO Gbv 4433-4444 series, taken over from the MGB. The model is produced as a one-time 2020 annual wagon. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5363 200 Standard coupling (10 pcs) 5400 222 Close coupling adapter (10 pcs) 4650 000 1 Detail parts
In stock: 2 on the shelf, shipped within 1-3 days
The Rhätische Bahn (RhB) placed into service in 1999 and 2002 respectively four-axle bogie container flat wagons Sbk-v 7701-7715 (26 t load capacity) and Sb-v 7716-7730 (reinforced, with 30 t load capacity). Due to the low-floor section, only one container can be carried, but this also applies under the restricted clearance gauge of the Bernina line. Thanks to the bogie design, the maximum speed of 80 km/h for the two-axle Lb-v could now be raised to 100 km/h. They can therefore be included not only in goods trains but also at the rear of express trains – for example on the Albula line. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5300 165 Standard coupling AFA (10 pcs) 5400 165 Close coupling adapter (10 pcs) 4689 000 1 Detail parts
In stock: 2 on the shelf, shipped within 1-3 days
Standard-design coaches I of the Rhaetian Railway The EW I A 1223-1243, AB 1519-1534 and B 2341-2373, procured between 1962 and 1966 for the main network, form the largest series of coaches in the RhB passenger coach fleet to date. The coach bodies were painted green on delivery; later, like all the other modern passenger coaches, they received a red livery. The railway markings were changed several times: from lettering to the emblem and then to the logo printed in several languages. For the Arosa line, the B 2315-2319 followed in 1969 with a slightly modified window arrangement. Spare parts 5001 000 Wheelset H0e (10 pcs) 5201 000 Wheelset H0m (10 pcs) 5300 180 Standard coupling AIA (10 pcs) 5400 180 Close coupling adapter (10 pcs) 4750 000 1 Detail parts
In stock: 2 on the shelf, shipped within 1-3 days
Low-floor coach As part of the Equal Opportunities for People with Disabilities Act, in 2010/11 the MOB acquired a total of eight low-floor coach bodies from Raility, Biel, running on bogies from Alstom, with the interior fit-out carried out in the railway's own workshop in Chernex. The coaches, designated Bs 231-238, with a central pivoting sliding door in the low-floor area and a disabled-accessible toilet, are now part of many train formations. Over their more than 10 years in service, they have received various paint schemes. The panorama coaches can additionally be fitted with the LED interior lighting, item no. 6549 000. Spare parts 5009 000 Wheelset H0e (10 pcs) 5209 000 Wheelset H0m (10 pcs) 5300 165 Standard coupling AFA (10 pcs) 5400 165 Close coupling adapter (10 pcs) 5599 300 Bogie side frame (2 pcs) 4799 000 1 Detail parts
In stock: 2 on the shelf, shipped within 1-3 days
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of the Austrian Federal Railways (Rail Cargo Wagon). New design 2025! Wagon made from die-cast metal Carries tank containers from the company TWS Tankcontainer-Leasing Four movable snap locks per trough The "T3000e" Megatrailer pocket wagon is a further development of the "T2000" class. Its loading space is designed to accommodate the low-lying vehicle parts of the Megatrailer. Additionally, it can also load trailers from previous designs, swap bodies and containers up to a length of 7.82 m.
In stock: 2 on the shelf, shipped within 1-3 days
High capacity sliding wall wagon type Habbiins of the Deutsche Bahn. Finely-detailed design With separately attached handle rails
In stock: 2 on the shelf, shipped within 1-3 days
Pressurised gas tank wagon, type Zags, operated by the Deutsche Bundesbahn. Version without sunroof
In stock: 2 on the shelf, shipped within 1-3 days
Steam locomotive 055 635 of the Deutsche Bundesbahn. Presented as a heavy shunting locomotive Die-cast metal chassis The Prussian Class G 8.1, of which almost 5,000 units were built, had a power output of 1,260 hp and reached a top speed of 55 km/h. The locomotive was mainly used in goods trains and for heavy shunting services.
In stock: 2 on the shelf, shipped within 1-3 days