Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rolling Stock

Locomotives, multiple units, coaches and wagons, new and pre-owned, from Z to G, checked by modellers.
Filter products
12% off the recommended price
Electric locomotive 155 013-6, DB AG
Roco 7500109 Scale H0
Electric locomotive 155 013-6, DB AG

Electric locomotive 155 013 of the Deutsche Bahn. Version with square buffers Filigree pantographs Finely engraved bogies Headlights/taillights switchable with a DIP switch From 1977 on, the Deutsche Reichsbahn purchased 270 class 250 series locomotives for heavy goods train services. After the reunification in 1992, these locomotives also joined the vehicle fleet in West Germany and were reclassified as series 155. Eventually, they were repainted in the typical red livery of the DB.

  • 2-rail, direct current

Selling price: CHF 244.00 RRP CHF 279.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive Re 420 505-0, BLS
Roco 7500110 Scale H0
Electric locomotive Re 420 505-0, BLS

Electric locomotive Re 420 505 of the BLS Lötschbergbahn. 1st construction series of the Re 4/4 II Former SBB locomotive Filigree single-arm pantograph Headlights switchable with a DIP switch Z21 driver's cab available In December 2004, SBB sold the locomotives Re 4/4 11110, 11117, 11119, 11123, 11137 and 11142 to BLS, which renumbered the locomotives as Re 420 501-506. A year later, SBB also took over locomotive 11107 and the prototypes Re 4/4 11102-11106, renumbering them 420 507-512. As the locomotives were urgently needed, they were painted in SBB's base colours for the first few years. Emblems and chrome lettering were all removed and replaced by simple silver decals. Gradually, the Re 420s were painted in the BLS corporate colours and also received the Omega logo, after the RM (Regional Mittellandbahn) was taken over. Re 420 505, formerly Re 4/4 11137, ran in green livery until 2009, when it was painted in the new BLS corporate colours.

  • 2-rail, direct current

Selling price: CHF 309.00 RRP CHF 354.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive E.432.012, FS
Roco 7500111 Scale H0
Electric locomotive E.432.012, FS

Three-phase electric locomotive E.432.012 of the Italian State Railways. In black livery Available with PluX22 interface for the first time Filigree pantographs Rich detailing on the model with many separately applied plug-in parts Hauls passenger and goods trains In 1927, the Ferrovie dello Stato (FS) purchased a total of 40 locomotives with rod drive from the "Società Ernesto Breda" locomotive factory. The 94-tonne, 13,910 mm long locomotives with the axle configuration 1'D1' were operated with three-phase current and had a continuous output of 2.200 kW. In the first years of operation, the body was painted black in the steam locomotive style. The E.432 was a common sight on the Brenner line in the 1950s, pulling international express trains. The Italian State Railways used the E.432 class until 1976.

  • 2-rail, direct current

Selling price: CHF 331.00 RRP CHF 379.90

On order, shipped within 10-15 days

13% off the recommended price
Electric locomotive 484 021-1, SBB Cargo
Roco 7500120 Scale H0
Electric locomotive 484 021-1, SBB Cargo

Electric locomotive 484 021 of the SBB Cargo. Anniversary locomotive “125 Jahre Gotthardbahn” Operation condition: From 2018 to 2020 In use at SBB Cargo International (with address under the door) Installation of ETCS between 2017 and 2018 Headlights/taillights switchable with a DIP switch The Re 484 021 currently used at SBB Cargo Switzerland operates throughout Switzerland in all areas of goods transport. Whether hauling heavy long-distance freight trains between Limmattal and Buchs SG or even units almost 100 metres long, this locomotive type has become an integral part of daily operations. Re 484 021 also reminds us of the 125th anniversary of the Gotthard Line in 2007, celebrated throughout the year on the north and south sides of the line. 021 is also the last locomotive of its type to be delivered. The model is reproduced in the condition it was during its service under the flag of SBB Cargo International, primarily operating on the north-south corridor.

  • 2-rail, direct current

Selling price: CHF 226.00 RRP CHF 259.90

On order, shipped within 10-15 days

12% off the recommended price New
Electric locomotive EU05-25
Roco 7500122 Scale H0
Electric locomotive EU05-25

Electric locomotive EU05-25 of the Polish State Railways. Form variation! Elaborate paintwork and printing Finely-detailed design of the bogies as well as the spoke wheels Fine metal wheels with low wheel flanges Completeley new designed pantograph with innovative mounting In 1961, the PKP purchased 30 four-axle electric locomotives from Skoda in Pilsen (Czechoslovakia), which were added to the fleet as the EU05 series. This was a slightly modified version of class E 499.1 of the Czechoslovak State Railways (CSD).

  • 2-rail, direct current

Selling price: CHF 261.00 RRP CHF 299.90

Pre-order, ships on release

12% off the recommended price
Electric locomotive Re 4/4 "Aargau"
Roco 7500123 Scale H0
Electric locomotive Re 4/4 "Aargau"

Electric locomotive Re 4/4 II 11181 of the Swiss Federal Railways. Mold variant! 2nd construction series of the Re 4/4 II "Zugkraft Aargau" design Pantographs with an innovative fastening Headlights switchable with a DIP-switch Z21 driver's cab available With many business partners, the canton of Aargau successfully promoted public transport and the Aargau region as a place to live and work. The centrepiece was the "Zugkraft Aargau" advertising locomotive with the logos of the main sponsors. The locomotive could then be found on the SBB network operating without logos until the end of 2004.

  • 2-rail, direct current

Selling price: CHF 309.00 RRP CHF 354.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive 1020 012-9, ÖBB
Roco 7500125 Scale H0
Electric locomotive 1020 012-9, ÖBB

Electric locomotive 1020 012 of the Austrian Federal Railways. Version in blood orange paintwork with umbra grey roof and chassis Metal grab rails and handrails Wheelsets with low wheel flanges Headlights/taillights switchable with a DIP switch After the war, there were 44 DRG class E 94 locomotives in Austria. In 1952 the ÖBB ordered three more locomotives. The class designation was changed from E 94 to 1020 in 1954. The class 1020 was used for more than five decades in the goods and ramp service, almost everywhere in Austria.

  • 2-rail, direct current

Selling price: CHF 244.00 RRP CHF 279.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive 7193 800-8, Beacon Rail
Roco 7500126 Scale H0
Electric locomotive 7193 800-8, Beacon Rail

Electric locomotive 7193 800 of Beacon Rail. Mold variant! New design of the rail scraper, bogie cover and shunting handle rails With detailed roof design Headlights/taillights switchable with a DIP switch Beacon Rail is a rail vehicle leasing company based in London. Its main business is leasing locomotives and rolling stock to various rail transport companies in Europe. In October 2024, Beacon and Siemens Mobility signed a framework agreement to deliver 25 Vectron multi-system locomotives. The new Vectron locomotives with an output of 6.4 MW will complement Beacon's existing Vectron fleet.

  • 2-rail, direct current

Selling price: CHF 235.00 RRP CHF 269.90

On order, shipped within 10-15 days

12% off the recommended price
2 piece set: Electric locomotive Re 4/4 II, SBB
Roco 7500127 Scale H0
2 piece set: Electric locomotive Re 4/4 II, SBB

Set of locomotives Re 4/4 II 11133 and Re 4/4 II 11192 of the Swiss Federal Railways. Mold variant! Each locomotive is fully equipped Each model without TSI numbers but already equipped with air conditioning With different train destination inscriptions "Buchs SG" or "Zürich HB", locomotive 11192 only on one side (not present on the prototype) Each locomotive equipped with an EP socket on the buffer beam Locomotive 11133 former Swiss-Express locomotive with extended buffer beam Classical red Re 4/4 II with a new rear-view mirror on the left in the direction of travel Switchable headlights with a DIP switch Z21 driver's cab available The history of the Re 4/4 II began in 1960 with the order of six prototypes of a multi-purpose locomotive with a Bo'Bo' axle arrangement. However, as it was not yet possible to determine whether the new locomotives could be designated as Ae or Re due to their weight, it was initially decided to use the neutral designation "BoBo". This designation, which was only intended for the beginning, has remained in use to this day. The first series ordered in 1965 (49 locomotives) only had a single scissor pantograph. However, this design had an unfavourable effect on everyday operations. From January 1969, all locomotives in the subsequent series appeared with two single-arm pantographs and an adapted arrangement of the roof superstructures.

  • 2-rail, direct current

Selling price: CHF 609.00 RRP CHF 699.90

On order, shipped within 10-15 days

13% off the recommended price
Electric locomotive E.444.031, FS
Roco 7500128 Scale H0
Electric locomotive E.444.031, FS

Electric locomotive E.444.031 of the Italian State Railways. Update! For the first time with PluX22 Interface available Version as modernised E.444R Delicately-crafted metal grab rails Use: High-quality passenger service The locomotives of the series E.444, more precisely 117 units, were put into service by the Italian State Railways as express train locomotives from 1970 on. Due to a ‘name the locomotive’ competition held by the FS, these locomotives were given a tortoise symbol and henceforth were commonly known as “Tartaruga”. All locomotives were redesigned between 1989 and 1997 and, after the maximum speed was increased from 180 to 200 km/h, were designated E.444R. In the process, they also lost their characteristic round appearance.

  • 2-rail, direct current

Selling price: CHF 226.00 RRP CHF 259.90

On order, shipped within 10-15 days

13% off the recommended price
Electric locomotive 185 142-7, DB AG
Roco 7500129 Scale H0
Electric locomotive 185 142-7, DB AG

Electric locomotive 185 142 of the Deutsche Bahn. Pantographs with innovative fastening Sophisticated roof design Extra applied windscreen wipers Cowcatcher mounted on the chassis Headlights/taillights switchable with a DIP switch The TRAXX AC1 is a series of electric locomotives primarily designed for transporting goods. The designation TRAXX stands for "Transnational Railway Applications with eXtreme fleXibility". The 185.1 series is derived from the 145 series, but it now features a modified design and a new series designation. It is designed to operate on both the 15 kV/16 2/3 Hz and 25 kV/50 Hz AC voltage systems commonly used in Europe. With a weight of 84 tonnes, it has a continuous output of 5.6 MW and is approved for speeds of up to 140 km/h. The locomotives were equipped with various country-specific packages for cross-border operations. 65 locomotives (185 085 - 185 149) were delivered with the Swiss country package. From May 2007, 185 142 was in service in the eye-catching "Edelweiss" design.

  • 2-rail, direct current

Selling price: CHF 226.00 RRP CHF 259.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive 460 028-4, SBB
Roco 7500131 Scale H0
Electric locomotive 460 028-4, SBB

Electric locomotive 460 028 of the Swiss Federal Railways. Condition in the first years of operation Ceremonial name: Seetal Extra applied windscreen wipers Taillight (1x white) or end-of-train marker(1x red) switchable with a DIP switch In 1992, the first Re 460 of the Swiss Federal Railways rolled out of the SLM and BBC workshops in Oerlikon, Switzerland. The locomotive became known to the public as "Lok 2000". It symbolised fast and modern passenger transport in Switzerland. An eye-catching and exceptionally aerodynamic design with a large front window, roof cladding and beading on the side walls makes the 460 an eye-catching rail vehicle.

  • 2-rail, direct current

Selling price: CHF 261.00 RRP CHF 299.90

On order, shipped within 10-15 days

13% off the recommended price New
Electric locomotive E 469 170, CSD
Roco 7500132 Scale H0
Electric locomotive E 469 170, CSD

Electric locomotive E 469 170 of the Czechoslovak State Railways. Based on the Škoda works type 43E In dark green livery Pantograph with innovative mounting Intricately detailed bogies and spoked wheels Fine metal wheels with low flanges Some signage is also included as etched parts In the early 1960s, the former Czechoslovak State Railways (CSD) required new, high-performance electric freight locomotives for the 3 kV DC system in the north and east of the country. Experience with the E 499.0 and E 499.1 classes, originally developed as universal locomotives, showed that they were better suited to passenger operations. Consequently, while the E 499.157 locomotive was still in production, it was modified for freight service and designated E 469.001. It retained the same power output, but the manufacturer fitted it with a modified axle gearbox. Its service weight was increased to 88 tonnes by adding ballast. The production locomotives featured a modified body. Unlike the E 499.0, which had six circular windows on each side panel, the locomotives of the series E 499.1 and E 469.1 had four rectangular windows. With a continuous power output of 2,032 kW, they could reach a maximum speed of 90 km/h. In total, Škoda delivered 85 locomotives to the Czechoslovak State Railways. The locomotives were primarily used to haul freight trains on main lines with gentle gradients. They were primarily used for coal block trains on routes from the North Bohemian lignite basin to the east, and were also in service in Slovakia from the 1960s to the 1990s. As derivatives of the E 499.1 series, these locomotives were fitted with electric train heating and could therefore also be used in passenger trains. The main reason for their limited use on passenger trains was their low top speed. Since the 1960s, most electrified lines had a maximum speed of 100 or 120 km/h. Consequently, the E 469.1 class locomotives were too slow for passenger trains. Nevertheless, they could often be seen in passenger service on selected routes. In 1988, the class designation was changed from E 469.1 to 121. Some units were also transferred to the Slovakian railway company ZSSK. Since then, several locomotives have been modernised and acquired by private operators. Slovakia from the 1960s to the 1990s. As derivatives of the E 499.1 series, these locomotives were fitted with electric train heating and could therefore also be used in passenger trains. The main reason for their limited use on passenger trains was their low top speed. Since the 1960s, most electrified lines had a maximum speed of 100 or 120 km/h. Consequently, the E 469.1 class locomotives were too slow for the use in passenger trains. Nevertheless, they could often be seen in passenger service on selected routes. In 1988, the class designation was changed from E 469.1 to 121. Some units were also transferred to the Slovakian railway company ZSSK. Since then, several locomotives have been modernised and acquired by private operators.

Selling price: CHF 252.00 RRP CHF 289.90

Pre-order, release expected in Q2 2027

13% off the recommended price
Electric locomotive 1041.11, ÖBB
Roco 7500133 Scale H0
Electric locomotive 1041.11, ÖBB

Electric locomotive 1041.11 of the Austrian Federal Railways. Mold variant! Roof design with AEG main switch Roof walkways as delicate etched parts Lifting hook replicas on the roof as separate plug-in parts Separately applied windscreen wipers Model with front windows moulded in rubber Raised decorative lines Version with adhesive numbers and emblem "Pflatsch" Headlights/taillights switchable with a DIP switch When the Class 1041 was built, it was the first time that the company Simmering-Graz-Pauker AG had been involved in developing locomotives. AEG, BBC, ELIN and SSW were responsible for the electrical part. From 1952, 25 locomotives were delivered to the Austrian Federal Railways. The locomotive 1041.11 was put into service in Salzburg on January 14, 1953. Its factory number was SGP-Graz 52742/1952, and the electrical components were sourced from BBC. Between December 1980 and November 1981, it underwent a general HG overhaul. At that time, the locomotive was stationed in Attnang-Puchheim, where it remained until it was taken out of service on November 30, 2001.

  • 2-rail, direct current

Selling price: CHF 226.00 RRP CHF 259.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive 103 113-7, DB
Roco 7500134 Scale H0
Electric locomotive 103 113-7, DB

Electric locomotive 103 113 of the Deutsche Bundesbahn. DB Museum Koblenz locomotive in current operation design Headlights/taillights switchable with a DIP switch Locomotive perfectly matches the AKE Rheingold, item no. 6200120, 6200121, 6200122 and 6200126 Z21 driver's cab available In the 1960s, the E 03 class was the most powerful electric locomotive to date for use in passenger transport on the Deutsche Bundesbahn. From 1970 to 1974, a total of 145 series locomotives were built and officially designated as Class 103.1. Due to their unique shape and enormous performance, the 103s quickly became the DB's showpieces. From Class 103, only two locomotives are preserved in operational condition at the DB Museum in Koblenz. The 103 113, featuring a red frame, was the first of its kind to receive it in 1977. This locomotive is used on selected journeys with the AKE-Rheingold.

  • 2-rail, direct current

Selling price: CHF 244.00 RRP CHF 279.90

On order, shipped within 10-15 days

12% off the recommended price New
Electric locomotive 121.046-7
Roco 7500135 Scale H0
Electric locomotive 121.046-7

Electric locomotive 121 046 of the Czech State Railways. Version with wide yellow stripe Pantograph with an innovative fastening Filigree design of the bogies and the spoked wheels Fine metal wheels with low wheel flanges At the beginning of the 1960s, the former Czechoslovak State Railways (CSD) needed new, powerful electric goods locomotives for the 3 kV DC system in the north and east of the country. As a prototype, a locomotive from the E 499.1 class, under construction at that time, was adapted for goods train service. With a continuous output of 2,032 kW, they reached a top speed of 90 km/h. Skoda delivered a total of 85 locomotives of the E 469.1 class to the Czechoslovak State Railways.

  • 2-rail, direct current

Selling price: CHF 261.00 RRP CHF 299.90

Pre-order, ships on release

12% off the recommended price
Electric locomotive BB 15056, SNCF
Roco 7500136 Scale H0
Electric locomotive BB 15056, SNCF

Electric locomotive BB 15056 of the French State Railways. Mold variant! Update! Authentic roof design with all details Filigree design of the pantograph Grand Comfort colour scheme With raised SNCF logos and running numbers on the side wall With the coat of arms "Vannes" Rich detailing on the model with many separately applied plug-in parts, some made of metal Headlights/taillights switchable with a DIP switch The BB 15000 is a French electric locomotive series which can be used on the AC network (25 kV 50 Hz). The design of the locomotives with the so-called "nez cassé" ("broken nose") comes from the hand of Frenchman Paul Arzens, who was responsible for the design of several SNCF locomotives at the time. From 1971 until 1976, Alstom built a total of 65 locomotives. The locomotives were the first French mainline locomotives with two driver's cabs and only one pantograph and were the last SNCF electric locomotives to be designed for the AC system only.

  • 2-rail, direct current

Selling price: CHF 244.00 RRP CHF 279.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive 114 039-1, DB AG
Roco 7500140 Scale H0
Electric locomotive 114 039-1, DB AG

Electric locomotive 114 039 of the Deutsche Bahn. Version in traffic red livery Ideal complement for many double-deck coaches from the ROCO product line With separately applied plug-in parts; some are etched All thirty-eight locomotives of class 112.0 were redesignated as class 114.0 on 1 April 2000, when they became part of the DB Regio fleet. They haul double-deck push-pull trains at speeds up to 160 km/h.

  • 2-rail, direct current

Selling price: CHF 235.00 RRP CHF 269.90

On order, shipped within 10-15 days

13% off the recommended price
Electric locomotive 4016, CFL
Roco 7500141 Scale H0
Electric locomotive 4016, CFL

Electric locomotive 4016 of the Luxembourg State Railways. Pantograph with innovative fastening Extra applied windscreen wipers Cowcatcher mounted on the chassis Headlights/taillights switchable with a DIP switch The TRAXX AC1 is an electric locomotive series primarily designed for transporting goods. The designation "TRAXX" stands for "Transnational Railway Applications with eXtreme fleXibility". Based on the 145 series but with a modified design and series designation, this locomotive can operate on both the 15 kV/16 2/3 Hz and 25 kV/50 Hz AC voltage systems commonly used in Europe. It weighs 84 tonnes, has a continuous output of 5.6 MW and is authorised to operate at speeds up to 140 km/h.

  • 2-rail, direct current

Selling price: CHF 226.00 RRP CHF 259.90

On order, shipped within 10-15 days

13% off the recommended price
Electric locomotive E 16 09, DRG
Roco 7500142 Scale H0
Electric locomotive E 16 09, DRG

Electric locomotive E 16 09 of the Deutsche Reichsbahn-Gesellschaft. Rich detailing on the model with separately applied plug-in parts True to the original Buchli drive Machine room and driver's cab with prints In the early 1920s, the Reichsbahn needed powerful electric locomotives to run express trains on the planned Bavarian network around Munich. As the first locomotives with the new Buchli single-axle drive, the Ae 3/6 I series, were proving very successful in Switzerland at the same time, the DRG ordered the first locomotives of a much heavier already in 1922. The 120 km/h locomotives achieved an hourly output of 2,340 kW. In its early years of service, the E 16 was used to haul high-value express trains from Munich. However, most of the time they hauled fast and express trains in Bavaria and to Austria.

  • 2-rail, direct current

Selling price: CHF 217.00 RRP CHF 249.90

On order, shipped within 10-15 days

12% off the recommended price
Electric locomotive BB 126163, SNCF
Roco 7500143 Scale H0
Electric locomotive BB 126163, SNCF

Electric locomotive BB 126163 of the French State Railways. Model with double headlights in the "En Voyage" design Finely etched parts on the roof Filigree design of each pantograph Headlights/taillights switchable with a DIP switch From 1988 to 1998, 234 dual-system electric locomotives of the BB 26000 series were delivered to the French State Railways. Known by the artificial name "Sybic", these locomotives are used throughout France in front of all types of trains. The multi-purpose locomotives reach a top speed of 200 km/h and deliver a power output of 5.600 kW.

  • 2-rail, direct current

Selling price: CHF 244.00 RRP CHF 279.90

On order, shipped within 10-15 days

13% off the recommended price New
Electric locomotive BB 15060
Roco 7500146 Scale H0
Electric locomotive BB 15060

Electric locomotive BB 15060 of the National French Railways. Form variation! Front with additional connection socket for push-pull train control Version with smooth side panels without address panels Version in silver-grey multi-service design With "Creil" crest Prototypical roof design with all details Finely-detailed current collector Switchable headlight/rear light with DIP switch The BB 15000 is a French electric locomotive class for use on the AC 25 kV 50 Hz rail network electrified with alternating current. The design of these locomotives, with their so-called “nez cassé” (broken nose), was created by the Frenchman Paul Arzens, who was responsible for designing several SNCF locomotives around that time. Between 1971 and 1976, Alstom built a total of 65 locomotives. The locomotives are the first French main line locomotives with two driver's cabs that have only one current collector and were the last electric locomotives of the SNCF to be designed only for the alternating current system.

  • 2-rail, direct current

Selling price: CHF 217.00 RRP CHF 249.90

On order, shipped within 10-15 days

13% off the recommended price
Electric locomotive 144 507-1, DB
Roco 7500147 Scale H0
Electric locomotive 144 507-1, DB

Electric locomotive 144 507 of the Deutsche Bundesbahn. New design! Operating condition around 1979/1980 With two SBS-10/54 type pantographs Extra applied windscreen wipers Wheelsets with low wheel flanges The procurement of the Class E 44.1 locomotives, later referred to as Class E 44.5 from 1938, originated from an initiative by the German locomotive industry. This model was a follow-up to the test locomotive E 44 101, built in 1930 by Maffei-Schwartzkopff-Werke and Berliner Maschinenbau AG, and marked a further development of the Class E 75. The 144 507 was from the second series with newly developed, more powerful traction motors and a longer frame. Around 1970, the large old signal lanterns were replaced with more miniature DB standard lanterns on all locomotives, and the pantographs were upgraded to versions with a pendulum rocker and double contact shoe. Apart from brief assignments outside the main line from Salzburg – Freilassing – Berchtesgaden, the locomotives successfully served for 50 years on the demanding mountain railway. In the summer timetable of 1979, the 144.5 was even used for the IC 511 "Chiemgau". This highlights the high regard in which the locomotives were held by the operating, maintenance, and administrative departments. Three E 44.5 locomotives have been preserved as museum locomotives to this day. EDITION FREILASSING Selected models from the former Freilassing railway depot are reproduced under the "Edition Freilassing" label. In 1905, the first locomotives, still steam locomotives at the time, moved into the locomotive depot with its twenty tracks. Around twenty years later, the electric locomotive workshop was built, followed by further buildings in the ensuing years. ROCO is also closely related to the Bavarian town of Freilassing, as the first German sales office was located there. Discover the exceptional models of this exclusive edition!

  • 2-rail, direct current

Selling price: CHF 252.00 RRP CHF 289.90

On order, shipped within 10-15 days

13% off the recommended price New
Electric locomotive E 44 509
Roco 7500148 Scale H0
Electric locomotive E 44 509

Electric locomotive E 44 509 of the Deutsche Bundesbahn. Mold variant! Operational status until the end of the 1960s Original design without Indusi magnets Pantograph type SBS 10 with innovative mounting Multicoloured cab rear wall Separately applied windscreen wipers Particularly airy bogies – as in the large original Wheelsets with low flanges FREILASSING EDITION Selected models from the former Freilassing railway depot are reproduced under the label "Edition Freilassing". In 1905, the first locomotives, still steam locomotives at that time, moved into the locomotive shed with its 20 tracks. Around 20 years later, the electric locomotive workshop was built, with additional buildings following in subsequent years. ROCO also has close ties to the Bavarian town of Freilassing, as this is where the first German sales office was located. Look forward to the models in this unique edition!

  • 2-rail, direct current

Selling price: CHF 252.00 RRP CHF 289.90

Pre-order, ships on release