Rolling Stock
Prototype To promote the renewal of rolling stock and the standardisation of goods wagons among European state railways, the UIC (Union Internationale de Chemins de Fer) designed two variants of an open goods wagon at the beginning of the 1950s: the UIC Type I and UIC Type II. The UIC Type II closely adhered to the dimensions of 10.0 metres in length with a 5.4-metre wheelbase, drawing strong inspiration from pre-war German designs. The entire frame and wagon body were constructed using welded techniques. Upon completing the detailed design, the Federal Railway began upgrading its O-rolling stock at the Kaiserslautern workshop, using the UIC Type II as a basis. From 1954, 10,589 wagons of the Omm 54 types were produced in Kaiserslautern in just two years. Although officially considered conversions based on usable parts from older wagons, these wagons were largely built from new materials. An exception was the brake components, for which Kkg brakes from donor wagons were utilised. In the subsequent construction batches – designated as Omm 55 – these brakes were also dispensed with and new KE brakes were installed, resulting in the procurement of over 17,300 units from 1955 onwards. Through numerous detailed improvements during production as well as later design changes, the vehicles were maintained throughout their lifecycle and were not completely retired until 1994. In addition to the Federal Railway, other state railways also procured wagons based on the UIC Type II specifications for their fleets. These were deployed by the DR Ost (East German Deutsche Reichsbahn), SNCF, SNCB, FS, MAV, ÖBB (Austrian Federal Railways), SBB, CSD, DSB and others, each featuring country-specific details or components. Model Lots of design differences Variants with handbrake Lots of extra details Wheels profiled on both sides Car floor of metal Different versions of the brake systems Three-point bearing for safe operation Achshalter aus Metall Side doors with inside contours
On order, shipped within 10-15 days
Prototype To promote the renewal of rolling stock and the standardisation of goods wagons among European state railways, the UIC (Union Internationale de Chemins de Fer) designed two variants of an open goods wagon at the beginning of the 1950s: the UIC Type I and UIC Type II. The UIC Type II closely adhered to the dimensions of 10.0 metres in length with a 5.4-metre wheelbase, drawing strong inspiration from pre-war German designs. The entire frame and wagon body were constructed using welded techniques. Upon completing the detailed design, the Federal Railway began upgrading its O-rolling stock at the Kaiserslautern workshop, using the UIC Type II as a basis. From 1954, 10,589 wagons of the Omm 54 types were produced in Kaiserslautern in just two years. Although officially considered conversions based on usable parts from older wagons, these wagons were largely built from new materials. An exception was the brake components, for which Kkg brakes from donor wagons were utilised. In the subsequent construction batches – designated as Omm 55 – these brakes were also dispensed with and new KE brakes were installed, resulting in the procurement of over 17,300 units from 1955 onwards. Through numerous detailed improvements during production as well as later design changes, the vehicles were maintained throughout their lifecycle and were not completely retired until 1994. In addition to the Federal Railway, other state railways also procured wagons based on the UIC Type II specifications for their fleets. These were deployed by the DR Ost (East German Deutsche Reichsbahn), SNCF, SNCB, FS, MAV, ÖBB (Austrian Federal Railways), SBB, CSD, DSB and others, each featuring country-specific details or components. Model Lots of design differences Variants with handbrake Lots of extra details Wheels profiled on both sides Car floor of metal Different versions of the brake systems Three-point bearing for safe operation Achshalter aus Metall Side doors with inside contours
On order, shipped within 10-15 days
Prototype To promote the renewal of rolling stock and the standardisation of goods wagons among European state railways, the UIC (Union Internationale de Chemins de Fer) designed two variants of an open goods wagon at the beginning of the 1950s: the UIC Type I and UIC Type II. The UIC Type II closely adhered to the dimensions of 10.0 metres in length with a 5.4-metre wheelbase, drawing strong inspiration from pre-war German designs. The entire frame and wagon body were constructed using welded techniques. Upon completing the detailed design, the Federal Railway began upgrading its O-rolling stock at the Kaiserslautern workshop, using the UIC Type II as a basis. From 1954, 10,589 wagons of the Omm 54 types were produced in Kaiserslautern in just two years. Although officially considered conversions based on usable parts from older wagons, these wagons were largely built from new materials. An exception was the brake components, for which Kkg brakes from donor wagons were utilised. In the subsequent construction batches – designated as Omm 55 – these brakes were also dispensed with and new KE brakes were installed, resulting in the procurement of over 17,300 units from 1955 onwards. Through numerous detailed improvements during production as well as later design changes, the vehicles were maintained throughout their lifecycle and were not completely retired until 1994. In addition to the Federal Railway, other state railways also procured wagons based on the UIC Type II specifications for their fleets. These were deployed by the DR Ost (East German Deutsche Reichsbahn), SNCF, SNCB, FS, MAV, ÖBB (Austrian Federal Railways), SBB, CSD, DSB and others, each featuring country-specific details or components. Model Lots of design differences Variants with handbrake Lots of extra details Wheels profiled on both sides Car floor of metal Different versions of the brake systems Three-point bearing for safe operation Achshalter aus Metall Side doors with inside contours
On order, shipped within 10-15 days
Prototype To promote the renewal of rolling stock and the standardisation of goods wagons among European state railways, the UIC (Union Internationale de Chemins de Fer) designed two variants of an open goods wagon at the beginning of the 1950s: the UIC Type I and UIC Type II. The UIC Type II closely adhered to the dimensions of 10.0 metres in length with a 5.4-metre wheelbase, drawing strong inspiration from pre-war German designs. The entire frame and wagon body were constructed using welded techniques. Upon completing the detailed design, the Federal Railway began upgrading its O-rolling stock at the Kaiserslautern workshop, using the UIC Type II as a basis. From 1954, 10,589 wagons of the Omm 54 types were produced in Kaiserslautern in just two years. Although officially considered conversions based on usable parts from older wagons, these wagons were largely built from new materials. An exception was the brake components, for which Kkg brakes from donor wagons were utilised. In the subsequent construction batches – designated as Omm 55 – these brakes were also dispensed with and new KE brakes were installed, resulting in the procurement of over 17,300 units from 1955 onwards. Through numerous detailed improvements during production as well as later design changes, the vehicles were maintained throughout their lifecycle and were not completely retired until 1994. In addition to the Federal Railway, other state railways also procured wagons based on the UIC Type II specifications for their fleets. These were deployed by the DR Ost (East German Deutsche Reichsbahn), SNCF, SNCB, FS, MAV, ÖBB (Austrian Federal Railways), SBB, CSD, DSB and others, each featuring country-specific details or components. Model Lots of design differences Variants with handbrake Lots of extra details Wheels profiled on both sides Car floor of metal Different versions of the brake systems Three-point bearing for safe operation Achshalter aus Metall Side doors with inside contours
On order, shipped within 10-15 days
Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype As early as 1900, the first specialised chemical tank wagons were developed for transporting chemical products. From the outset, they differed significantly from the tank wagons designed for transporting flammable liquids. A crucial safety feature of chemical tank wagons for acid transport was the absence of bottom valves, which helped to prevent accidental leakage of their hazardous cargo. Additionally, due to the high density of acids, these tanks were comparatively smaller than those used for flammable liquids. For the typical 8.8-metre-long wagons of the standardised interchangeable types introduced in the 1930s, a tank volume of between 10 and 12 m³ proved to be the most economical solution. Depending on the manufacturing capabilities of the wagon builders, the tanks were either riveted or welded. However, the heating pans located in the lower section of the tanks were consistently produced using welding technology to ensure greater tightness and stability. The wagons, originally built from 1939 onwards for I.G. Farbenindustrie and the Wirtschaftliche Forschungsgesellschaft (Wifo), were largely transferred to the successor companies Bayer, BASF and VTG in the Federal Republic of Germany after the Second World War. In the German Democratic Republic, Deutsche Reichsbahn (the East German national railway) took possession of the wagons and leased them to state-owned enterprises, known as VEBs. After approximately 40 years of service, these wagons were gradually decommissioned from the mid-1970s onwards. The last chemical tank wagons of this type were finally retired in 1988. Model Consideration of many design differences Variants in riveted or welded construction Replica of the heating pans Variants with and without brakeman's cab Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype In 1941, the Heidelberg company Waggonfabrik Fuchs delivered the first 6-axle gas tank wagons to the National Railway. With a length over buffers of 14.6 metres and a tank volume of 42.5 m³, these vehicles were a good deal larger than the acid tank wagons, which were based on the same design. The wagons utilised for gas transport were essential for conveying butane and propane. The National Railway sent these wagons to customers in West Germany, including the private wagon leasing company VTG. In the East, the wagons were utilised directly by the National Railway. To prevent excessive heating of the gas loaded in the tanks due to solar radiation, and the resulting expansion and pressure build-up inside the tank, some of the wagons were fitted with a sun shield. On the wagons operated by the National Railway (East), the conversion of the boiler access was documented. This could no longer be done from the sides, but only from the hand-brake platform. Model Variants with and without sunroof Bogie with three-point support Precise paintwork and painting Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Free standing handle bars Individually mounted axle brake rod
On order, shipped within 10-15 days
Prototype In 1941, the Heidelberg company Waggonfabrik Fuchs delivered the first 6-axle gas tank wagons to the National Railway. With a length over buffers of 14.6 metres and a tank volume of 42.5 m³, these vehicles were a good deal larger than the acid tank wagons, which were based on the same design. The wagons utilised for gas transport were essential for conveying butane and propane. The National Railway sent these wagons to customers in West Germany, including the private wagon leasing company VTG. In the East, the wagons were utilised directly by the National Railway. To prevent excessive heating of the gas loaded in the tanks due to solar radiation, and the resulting expansion and pressure build-up inside the tank, some of the wagons were fitted with a sun shield. On the wagons operated by the National Railway (East), the conversion of the boiler access was documented. This could no longer be done from the sides, but only from the hand-brake platform. Model Variants with and without sunroof Bogie with three-point support Precise paintwork and painting Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Free standing handle bars Individually mounted axle brake rod
On order, shipped within 10-15 days
Prototype In 1941, the Heidelberg company Waggonfabrik Fuchs delivered the first 6-axle gas tank wagons to the National Railway. With a length over buffers of 14.6 metres and a tank volume of 42.5 m³, these vehicles were a good deal larger than the acid tank wagons, which were based on the same design. The wagons utilised for gas transport were essential for conveying butane and propane. The National Railway sent these wagons to customers in West Germany, including the private wagon leasing company VTG. In the East, the wagons were utilised directly by the National Railway. To prevent excessive heating of the gas loaded in the tanks due to solar radiation, and the resulting expansion and pressure build-up inside the tank, some of the wagons were fitted with a sun shield. On the wagons operated by the National Railway (East), the conversion of the boiler access was documented. This could no longer be done from the sides, but only from the hand-brake platform. Model Variants with and without sunroof Bogie with three-point support Precise paintwork and painting Individually mounted brake systems Finely engraved bogies Brake blocks in wheel plane Free standing handle bars Individually mounted axle brake rod
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days
Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Metal wheels Individually mounted handle bars Individually mounted axle box cover NEM-standard short-coupling Metal axle bearing Multi-part brake system Brake blocks in wheel plane True to original brake unit on the car bottom
On order, shipped within 10-15 days