Coaches
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA
On order, shipped within 10-15 days
Prototype At the end of 2010, Bombardier Transportation obtained an order for 27 five-part Bombardier TWINDEXX Vario double-decker push-pull trains belonging to the 2010 generation. The block trains with comfortable equipment for long-distance traffic consist of three 2nd class middle wagons, one 1st class middle wagon and one 2nd class control car respectively. The TWINDEXX Vario is a further development of the tried-and-trusted double-decker platform from Görlitz. Each train has 468 seats, 70 of which are in 1st class as well as 9 bicycle parking spaces. The top speed of the trains is 160 km/h. The equipment of the double-decker trains for use in long-distance traffic will correspond to the level of comfort found in ICE trains. Model Exactly scale 1:160 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Long-distance headlights (digital) True-to-scale details Perfectly replicated three-dimensional front Finely engraved details Fine paintwork and painting Illuminated driver's cab With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel For digital operation, decoder are required for each individual vehicle - Middle Car: Order no. 0019695.01; Control Car: Order no. 0019695.02 (Operating the vehicle without decoder in digital mode can result in damage to the electronics)
On order, shipped within 10-15 days
Prototype At the end of 2010, Bombardier Transportation obtained an order for 27 five-part Bombardier TWINDEXX Vario double-decker push-pull trains belonging to the 2010 generation. The block trains with comfortable equipment for long-distance traffic consist of three 2nd class middle wagons, one 1st class middle wagon and one 2nd class control car respectively. The TWINDEXX Vario is a further development of the tried-and-trusted double-decker platform from Görlitz. Each train has 468 seats, 70 of which are in 1st class as well as 9 bicycle parking spaces. The top speed of the trains is 160 km/h. The equipment of the double-decker trains for use in long-distance traffic will correspond to the level of comfort found in ICE trains. Model Exactly scale 1:160 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs True-to-scale details Finely engraved details Fine paintwork and painting NEM-standard close coupling For digital operation, decoder (order no. 0019695.01) are required for each individual vehicle (Operating the vehicle without decoder in digital mode can result in damage to the electronics)
On order, shipped within 10-15 days
Prototype At the end of 2010, Bombardier Transportation obtained an order for 27 five-part Bombardier TWINDEXX Vario double-decker push-pull trains belonging to the 2010 generation. The block trains with comfortable equipment for long-distance traffic consist of three 2nd class middle wagons, one 1st class middle wagon and one 2nd class control car respectively. The TWINDEXX Vario is a further development of the tried-and-trusted double-decker platform from Görlitz. Each train has 468 seats, 70 of which are in 1st class as well as 9 bicycle parking spaces. The top speed of the trains is 160 km/h. The equipment of the double-decker trains for use in long-distance traffic will correspond to the level of comfort found in ICE trains. Model Exactly scale 1:160 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs True-to-scale details Finely engraved details Fine paintwork and painting NEM-standard close coupling For digital operation, decoder (order no. 0019695.01) are required for each individual vehicle (Operating the vehicle without decoder in digital mode can result in damage to the electronics)
On order, shipped within 10-15 days
Prototype “IC 2” is the name for the DB Fernverkehr AG TWINDEXX Vario® trains introduced following the timetable change on 13 December 2015. Back in 2010, Bombardier Transportation received the first order for 27 five-part double-deck trains in combination with the BR 146.5 locomotives from a previously-concluded framework contract with DB AG for a total of 800 double-deck trains. An order was placed for a further 17 trains in March 2015. The TWINDEXX Vario® is a further development of the tried-and-trusted double-deck platform from Görlitz. The top speed of the trains is 160 km/h. The IC 2 gradually replaced all previous IC trains in the new long-distance traffic concept from DB Fernverkehr AG. After the timetable change, the first routes for these trains were Leipzig – Norddeich Mole, Dresden – Cologne and Koblenz – Norddeich Mole. Model Exactly scale 1:160 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs Long-distance headlights (digital) True-to-scale details Perfectly replicated three-dimensional front Finely engraved details Fine paintwork and painting Illuminated driver's cab With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel For digital operation, decoder are required for each individual vehicle - Middle Car: Order no. 0019695.01; Control Car: Order no. 0019695.02 (Operating the vehicle without decoder in digital mode can result in damage to the electronics)
On order, shipped within 10-15 days
Prototype “IC 2” is the name for the DB Fernverkehr AG TWINDEXX Vario® trains introduced following the timetable change on 13 December 2015. Back in 2010, Bombardier Transportation received the first order for 27 five-part double-deck trains in combination with the BR 146.5 locomotives from a previously-concluded framework contract with DB AG for a total of 800 double-deck trains. An order was placed for a further 17 trains in March 2015. The TWINDEXX Vario® is a further development of the tried-and-trusted double-deck platform from Görlitz. The top speed of the trains is 160 km/h. The IC 2 gradually replaced all previous IC trains in the new long-distance traffic concept from DB Fernverkehr AG. After the timetable change, the first routes for these trains were Leipzig – Norddeich Mole, Dresden – Cologne and Koblenz – Norddeich Mole. Model Exactly scale 1:160 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs True-to-scale details Finely engraved details Fine paintwork and painting NEM-standard close coupling For digital operation, decoder (order no. 0019695.01) are required for each individual vehicle (Operating the vehicle without decoder in digital mode can result in damage to the electronics)
On order, shipped within 10-15 days
Prototype “IC 2” is the name for the DB Fernverkehr AG TWINDEXX Vario® trains introduced following the timetable change on 13 December 2015. Back in 2010, Bombardier Transportation received the first order for 27 five-part double-deck trains in combination with the BR 146.5 locomotives from a previously-concluded framework contract with DB AG for a total of 800 double-deck trains. An order was placed for a further 17 trains in March 2015. The TWINDEXX Vario® is a further development of the tried-and-trusted double-deck platform from Görlitz. The top speed of the trains is 160 km/h. The IC 2 gradually replaced all previous IC trains in the new long-distance traffic concept from DB Fernverkehr AG. After the timetable change, the first routes for these trains were Leipzig – Norddeich Mole, Dresden – Cologne and Koblenz – Norddeich Mole. Model Exactly scale 1:160 True-to-original length over buffer Structure made of high-quality, impact-resistant plastic Metal bottom plate Printed window frames In-plane assembled windows Illuminated destination indicator (digital) Lighting with warm white LEDs True-to-scale details Finely engraved details Fine paintwork and painting NEM-standard close coupling For digital operation, decoder (order no. 0019695.01) are required for each individual vehicle (Operating the vehicle without decoder in digital mode can result in damage to the electronics)
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days