Freight Wagons
Wagon set with two "Express Rail" sliding tarpaulin wagons, Shimmns type, of ZSSK Cargo. Suitable for assembling block trains
Pre-order, release expected in Q3 2027
Articulated double-pocket wagon, type Sdggmrs/T2000, of Ahaus-Alstätter Eisenbahn AG. Wagons made from die-cast metal Loaded with two 45′ "M-REAL" swap bodies
Pre-order, release expected in Q3 2027
Wagon set with three 4-axle self-unloading hopper wagons, type Facs, of the DB Bahnbau Group. Featuring many separately applied plug-in parts Wagons with different markings
Pre-order, release expected in Q3 2027
Wagon set with two 6-axle articulated double-pocket wagons, type Sdggmrs/T2000. Railcare/Coop range available exclusively from ROCO Featuring a prototypical loading bridge, fully functional for use on layouts Elaborately reproduced refrigeration unit Wagons made from die-cast metal Model supplied fully factory-fitted The modern T2000 wagons from railCare, fitted with two permanently installed 45-foot refrigerated containers, replace the sliding-wall wagons previously used on a temporary basis by SBB Cargo. They are specially designed for loading and unloading operations at railway ramps and, thanks to their well-thought-out design, offer a high degree of practicality. A three-part loading platform compensates for height differences relative to the ramp, enabling maximum flexibility when loading and unloading with industrial trucks. With their eye-catching Coop branding, the wagons have become a familiar sight in Swiss freight transport and are in service throughout the country almost every day. Thanks to their versatility, they operate in a wide variety of train formations and lengths. Just three coaches form a true-to-the-original train model, which can be used behind locomotives from both SBB Cargo and BLS Cargo, as well as behind the railCare Vectron "Coop". The longest all-T2000 trains are the so-called "water trains" operating between Wangen near Olten and Brig. Depending on requirements, 12 to 13 wagons are regularly used on these services.
Pre-order, release expected in Q3 2027
Chlorine tank wagon "Korsnäs" operated by the Swedish State Railways.
Pre-order, release expected in Q4 2027
Wagon set with two cement silo wagons, type Uces, of the Deutsche Reichsbahn.
Pre-order, ships on release
Wagon set with two self-unloading hopper wagons, type Wwyah, of the Polish State Railways. Mould variant! Model featuring a Polish 1XTa bogie for the first time
Pre-order, release expected in Q4 2027
Wagon set with three open goods wagons of the Deutsche Reichsbahn-Gesellschaft. The set contains a livestock wagon, type Vwh "Altona", an open goods wagon, type O "Halle", and an open goods wagon with a brakeman's cab, type Om "Breslau". Livestock wagon with spoked wheels and movable sliding doors
Pre-order, release expected in Q4 2027
Wagon set (1) with three goods wagons of the Italian State Railways. The set contains a 6-axle heavy-duty wagon, type Samms, and two 4-axle stanchion wagons, type Rgs. Loaded with blocks of marble
Pre-order, release expected in Q4 2027
Wagon set with two 4-axle sliding tarpaulin wagons, type Rils, of the French State Railways. Tarpaulins in different colours
Pre-order, release expected in Q3 2027
Wagon set with two dust silo wagons, type Uacs, of Pultrans Bahntransport GmbH. Frame in light-grey livery Many separately applied parts Pultrans GmbH, headquartered in Budapest, operates various types of dust silo wagons that are unloaded using compressed air. These wagons can transport a wide range of powdered materials (cement, limestone powder, alumina, fly ash, lime powder, hydrated lime, soda, feldspar, zeolite, rock salt, etc.).
Pre-order, release expected in Q4 2027
Wagon set (2) with three goods wagons of the Italian State Railways. The set contains a 6-axle heavy-duty coach, type Salmmp, and two 4-axle stanchion coaches, type Rgs. Loaded with blocks of marble
Pre-order, release expected in Q4 2027
Wagon set with two 4-axle open goods wagons, type Eas, of the Hungarian State Railways. Different designs of the end and side walls For the transport of bulk goods or scrap
Pre-order, release expected in Q4 2027
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of VTG. Wagons made from die-cast metal Loaded with two lorry semi-trailers from the freight forwarder LKW Walter With four movable snap locks per trough The "T3000" megatrailer pocket wagon is a further development of the T2000 type. The loading area is designed to accommodate the low-slung vehicle parts of megatrailers. However, older trailer types, as well as swap bodies and containers up to 7.82 m in length, can also be loaded.
Pre-order, release expected in Q4 2027
Four-axle sliding-wall wagon, Habbills type, of the Deutsche Bahn.
Pre-order, release expected in Q4 2027
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of Ermewa. Wagon made from die-cast metal Loaded with two 45′ containers from the freight forwarder Express Interfracht Can be fitted with an upright or a folded shunting handle Authentic replica of the pivot joint
Pre-order, release expected in Q4 2027
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of Wascosa. Wagon made from die-cast metal Loaded with two lorry semi-trailers from the freight forwarder Vertex With eight movable snap locks per trough Can be fitted with an upright or a folded shunting handle Authentic replica of the pivot joint The "T3000" megatrailer pocket wagon is a further development of the T2000 type. The loading area is designed to accommodate the low-slung vehicle parts of megatrailers. However, older trailer types, as well as swap bodies and containers up to 7.82 m in length, can also be loaded.
Pre-order, release expected in Q3 2027
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of TX Logistik. Wagon made from die-cast metal Loaded with two lorry semi-trailers from the freight forwarder Stegagno With eight movable snap locks per trough Can be fitted with an upright or a folded shunting handle Authentic replica of the pivot joint The "T3000" megatrailer pocket wagon is a further development of the T2000 type. The loading area is designed to accommodate the low-slung vehicle parts of megatrailers. However, older trailer types, as well as swap bodies and containers up to 7.82 m in length, can also be loaded.
Pre-order, release expected in Q4 2027
Covered goods wagon, type Gklm, of the Deutsche Reichsbahn.
Pre-order, release expected in Q4 2027
Wagon set with two covered goods wagons of the Deutsche Bundesbahn. The set contains a maintenance wagon and a workshop wagon.
Pre-order, release expected in Q4 2027
Wagon set with three self-unloading hopper wagons, type Fals, of PKP Cargo.
Pre-order, release expected in Q3 2027
Four-axle articulated stanchion wagon, type Laaprs, of Rail Cargo Wagon. New design! Fine grab rails at wagon ends Detailed loading area Precisely reproduced stanchions Item No. 6600497: Modified running number
Pre-order, release expected in Q4 2027
Four-axle articulated stanchion wagon, type Laaprs,of Rail Cargo Wagon. New design! Fine grab rails at wagon ends Detailed loading area Precisely reproduced stanchions Item No. 6600496: Modified running number
Pre-order, release expected in Q4 2027
Container wagon, type Sgns, of Stadler Rail. Designed as a service and workshop wagon Loaded with two 20' containers Wagon made from die-cast metal Implemented as an approximate model based on the Sgns container wagon In Switzerland, Stadler Rail operates two pairs of such service wagons. The prototype are Sgs wagons, formerly operated by Albtal-Verkehrs-Gesellschaft. The wagons always operate in pairs and are intended to transport rolling stock, usually multiple units. Both wagons have a permanently mounted 6-foot container on the outside, ballasted with stones. In the prototype, one wagon in each pair also has an additional 12-foot accommodation container mounted on top for the accompanying staff. For the model, a set based on a Sgns wagon and inspired by the prototype has been created to complement the Stadler Re 465.
Pre-order, release expected in Q3 2027