Freight Wagons
Prototype 6-axle articulated double pocket wagon, type Sdggmrss 738 (T3000e), of the Deutsche Bahn AG (DB AG). Modern flat wagon for combined transport service. Traffic red basic paint scheme. Version with two folding latches on the sides. The wagon looks as it did starting in 2020. Loaded with two 40ft. box containers. Model Both flat wagon halves are of metal and are movably mounted on the middle bogie. The folding latches on the sides are mounted at the factory. They can be folded up for the transport of containers or swap bodies. Many separately applied details such as the transition grating, steps, brake lines, and grab rails at the wagon ends. Type Y25 bogies. Buffer height according to NEM. Brackets for kingpins in a high and a low version and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two 40ft. box containers of the fictitious haulage firm Märklin Container shipping. One container in a High-Cube version. Length over the buffers 39.3 cm. DC wheelset E700580. Highlights With an attractive load Detailed version largely of metal Folding latches mounted and functional Many separately applied details Buffer height according to NEM. Special model, available only in the Märklin Stores (D: Göppingen, Mainz, Essen, Stuttgart, Neustadt/Donau, Mühlheim/Main, München. NL: Utrecht. IT: Bergamo. JP: Osaka) One-time series One-time series.
Prototype Chemical tank wagon of VTG AG, registered in Germany. Type with an insulated kinked tank and a side ladder. Model Detailed chassis with an open-work frame. Type P65 bogies. Numerous applied separate parts. Length over the buffers 18.0 cm. DC wheelset E700580.
Prototype: 2-axle tank wagon. Privately owned wagon of BP Benzin und Petroleum AG, Hamburg, registered with the Deutsche Bundesbahn (DB). Operating condition, Era III.
Club members only (Märklin Insider)
Prototype 2 covered milk vans of Bavarian design of the German Federal Railway (DB). Wagons from the first delivery in 1908 with a flat roof. Both wagons still with DR lettering of the British-US zone. Used in part-load freight service or for transporting fresh milk. The wagons look as they did around 1952/53. Model 6 Grove type ventilators on the roof per wagon. Two steps below the sliding doors on each side. Applied access steps on one end of each of the wagons. Both goods wagons have different running numbers, are packaged individually, with additional outer packaging. Overall length over the buffers 22.2 cm. DC wheelset E700580 per wagon. Highlights Wagons for use in part-load freight service and for transporting fresh milk Finely detailed version Also suitable for including in passenger trains
Prototype 5 freight cars of different types of the German Federal Railroad (DB). 1 type Pwg freight train baggage car with a roof clerestory (Pwg Pr 14). 1 type Omm 34 high-side gondola (former Ommu Klagenfurt). 1 type Gmrs 30 boxcar (former Grhs Oppeln, still with DR British-American Zone markings). 1 type G München boxcar (still with DR French Zone markings). 1 type G 10 boxcar. The cars look as they did around 1954. Model Freight train baggage car and G 10 boxcar with sliding doors that can be opened. High-side gondola with a load insert and real coal in a scale grain size. The G 10 boxcar as the last car in the train can be fitted with the included marker discs for installation by the owner. All cars with different running numbers. Total length over the buffers approx. 53.9 cm. DC wheel set for each car E700580. Note The matching E 71.1 electric locomotive is also being produced under item number 39771 in a one-time series exclusively for Insider members. The freight car set for the E 71.1 is being produced in 2022 in a one-time series only for Insider members. You can find this freight car set in a DC version in the Trix H0 assortment under item number 24825 exclusively for Trix Club members.
Club members only (Märklin Insider)
Prototype Type R10 of the German Federal Railway (DB) in the condition of Era IIIb. Used for transporting sawn logs. Running number 403 327. Model Version with a brake platform and a movable brake crank. Many separately applied details such as the brake reservoir, brake lines, brake heart, brake triangle and safety loops. 2 sawn real wood logs on a matching loading frame. Screw couplers are included. The minimum radius for operation is 1020 mm. Length over the buffers 37.5 cm.
Prototype Privately owned 4-axle bottle wagon. Intended for transporting carbide. Model Exclusive wagon for Insider members with 25 years of membership. The carbide bottle is printed with the Insider logo and the lettering of a privately owned wagon. Length over the buffers 56 mm. One-time series The 82091 carbide bottle wagon is being produced exclusively for the Insider members with 25 years of membership. Note Exclusive Insider wagon for the members with 25 years of club membership.
Club members only (Märklin Insider)
Prototype Two-axle tank wagon with a brake platform. Model Exclusive tank wagon. Black disc wheels. Wagon length over the buffers 40 mm. One-time series The 82319 tank wagon is being produced exclusively for Insider members with 5 years of membership.
Club members only (Märklin Insider)
Prototype 3 Tams 886 wagons from the German Federal Railway (DB), in an Era IV condition. Model 3 Tams 886 sliding roof wagons from the German Federal Railway (DB), made of plastic, disc wheels black nickel-plated. Total length over the buffers approximately 174 mm.
Prototype 4 Eanos 415 W high-sided open wagons and one Res 424 Z stake wagon from the Polish logistics group PKP Cargo for transporting pit props and long timber. In an Era VI condition. Model 4 x Eanos type wagons, 3 x of them loaded with pit props. The models are lettered prototypically and are equipped with applied brake change-over levers without a protective bracket, compressed air tanks, and hand wheels. 1 x Res stake wagon with long timber as a load. All of the wagons have close coupler hooks. Length over the buffers approximately 426 mm. Highlights All of the wagons are lettered individually and some are equipped with load inserts The Eanos for the first time with brake change-over levers without a protective bracket
Prototype Four-axle container flat wagon of the type Sgns of the Schweizerische Bundesbahn, Cargo business unit (SBB Cargo). Loaded with 2 coop® refrigerated containers. Operating condition around 2017. Model Chassis of die-cast metal, type Y 25 bogies, with close couplers with a guide mechanism, loaded with 2 refrigerated containers. Length over the buffers 123 mm.
Prototype 2-axle tank wagon "MILLET", registered with the French State Railways (Société nationale des chemins de fer français / SNCF). Model Separately applied platform, walkway, and access ladder. Detailed chassis with an open frame. Simplified version. Length over the buffers 55 mm.
Prototype Three 4-axle chemical tank wagons of the firm Millet. Registered in the Netherlands. Current operating condition. Model Detailed chassis with an open frame. Type Y25 bogies. Separately applied working platform. Separately applied brake platform. Total length over the buffers 240 mm.
Prototype One goods wagon and four passenger coaches of different types of the German Federal Railway (DB). One Gmms 44 covered van, one four-axle second class rebuilt coach with a baggage compartment BD4yge, two four-axle second class passenger coaches B4ye of the standard design, and one four-axle second class rebuilt coach B4yge. Train run: Frankfurt [M] – Gießen – Marburg – Biedenkopf – Siegen – Troisdorf – Köln. The passenger coaches are in a bottle green basic paint scheme. The Gmms 44 is in red brown. Model Each passenger coach has LED interior lighting and a buffer capacitor fitted as standard. The seating coaches are fitted with a total of 20 miniature figures from the Preiser company. Total length over the buffers approx. 103 cm. Highlights The passenger coaches have LED interior lighting and a buffer capacitor as standard Fitted with a total of 20 miniature figures from the Preiser company Train run: Frankfurt [M] – Gießen – Marburg – Biedenkopf – Siegen – Troisdorf – Köln One-time series The 23508 passenger train with a goods wagon is being produced in 2025 in a one-time series exclusively for Trix Club members only. Note The matching 66 002 steam locomotive is also being offered exclusively for Trix Club members only under item number 25660.
Prototype 6 four-axle, high-capacity, open self-unloading hopper wagons of the type Falns 182 of Deutsche Bahn AG (DB AG). Used to transport bulk goods that are not sensitive to moisture. Red brown basic paint scheme. All wagons with 2 transition platforms. 3 wagons with a hand brake on one transition platform and 3 wagons without a hand brake. Type 665 bogies. The wagons look as they did around 2015. Model Self-unloading hopper wagons in a true-to-scale and detailed version, with many applied details. 6 different running numbers. All wagons with 2 applied transition platforms each and 3 wagons with a hand wheel for the hand brake at wagon end 2. Prototypically, both long sides of the wagons are each without access holes on the upper body and without grab handles. Self-unloading hopper wagons loaded with load inserts and real coal. All wagons in the set individually packaged. Buffer height according to NEM. Length over the buffers per wagon 14.4 cm. AC wheelset per wagon E700150. Highlights New tooling for the Falns 182 self-unloading hopper wagons True-to-scale version in 1:87. Many applied details. 6 different running numbers Loaded with load inserts and real coal Ideal for block trains Buffer height according to NEM. Sold individually from a wagon set Note The matching heavy class 151 goods train electric locomotive can be found under item no. 25652, also in the Trix H0 range.
Prototype 10 four-axle high-capacity self-unloading hopper wagons of the type OOt Oldenburg of the Deutsche Reichsbahn-Gesellschaft (DRG). Version with a brake platform on the end and a hand wheel at one end of the wagon as well as with signal supports on the ends of the upper body. Representation of the radial axles. Used to transport coal. The wagons look as they did at the end of the 1920s / beginning of the 1930s. Model Detailed version of the visually striking rows of rivets and signal supports on the upper body. Imitation of the radial axles. Different running numbers. All wagons with a brake platform and a hand wheel on the end at one end of the wagon. Loaded with load inserts and real coal with a true-to-scale grain size. Length over the buffers per wagon 11.5 cm. AC wheelset per wagon E700150. Highlights New tooling for the OOt Oldenburg high-capacity self-unloading hopper wagon Detailed version of the striking rows of rivets Separately applied signal supports on the ends Load inserts loaded with real coal Many different running numbers In use for block trains Buffer height according to NEM One-time series The high-capacity self-unloading hopper wagon set will be produced in 2025 in a one-time series exclusively for Trix Club members. Note The matching heavy class E95 goods train electric locomotive is offered under item no. 25950 and a prototypically matching goods brake van under item no. 24987, also exclusively for Trix Club members in 2025.
Club members only (Trix Club)
Prototype 6-axle articulated double pocket wagon, type Sdggmrss, with curved side surfaces, of MFD Rail GmbH. Modern carrier wagon for combined freight traffic. Granite grey basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as the transition grating, steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. A mount for a support trestle, holders for kingpins in high and low versions, shunting steps and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage company. Length over the buffers approx. 39.3 cm. AC wheelset E376938. Highlights Completely new tooling Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with two semi-trailers
Prototype 6-axle articulated double pocket wagon, type Sdggmrss (T3000e), of CFL Cargo. Modern carrier wagon for combined freight traffic. Pure green basic paint scheme. Version with four folding latches on the sides. The wagon looks as it did starting in 2021. Loaded with two curtain-side semi-trailers of the Mars haulage company. Model Both carrier wagon halves of metal, mounted so that they can move on the centre bogie. Folding latches on the sides fitted at the factory. They can be folded up for transporting containers or swap bodies. Many separately applied details such as steps, brake lines and grab rails at the wagon ends. Type Y25 bogies. Buffer height per NEM. Holders for kingpins in high and low versions, shunting steps and air tanks for the wagon ends are included as separate plug-in parts. Loaded with two curtain-side semi-trailers of the Mars haulage company. Length over the buffers approx. 39.3 cm. AC wheelset E376938. Highlights Detailed version largely of metal Folding latches fitted and functional Many separately applied details Buffer height per NEM. Loaded with two semi-trailers
Prototype 2-axle tank wagon with a hand brake platform and an access ladder at the end. Privately owned wagon of Damman & Lewens, Hamburg, registered with the German Federal Railway. The wagon looks as it did starting in 1965. Model Applied brake platform with an access ladder and a filling platform. Reproduction of the open-work wagon floor. Length over the buffers approx. 10.0 cm. AC wheelset E36667900. Note This tank wagon is produced exclusively for Trix Club members with 5 years of membership.
Club members only (Trix Club)
Prototype Pocket wagon, type Sdgkms. Red brown basic paint scheme. Operating condition 2000. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Model Frame, floor and load pockets of metal. Many applied details. Special bogies of low design. Rectangular buffers. The load holders are adjustable. Holders and a trailer support stand are included. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Length over the buffers 19.0 cm. AC wheelset E321973. Highlights With an attractive load Detailed version largely of metal Many separately applied details One-time series The pocket wagon is produced exclusively for Trix Club members with at least 25 years of membership.
Club members only (Trix Club)
Prototype Pocket wagon type Sdgkms. Basic paint scheme in red brown. The wagon looks as it did in 2000. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Model Frame, floor and loading troughs of metal. Many applied details. Special bogies of a low design. Rectangular buffers. The load mounts are adjustable. Mounts and a trailer support are included. Loaded with a curtain-side semi-trailer in an attractive Trix livery. Length over the buffers 19.0 cm. AC wheelset E321973. Trix H0 wheelset E320577. Highlights With an attractive load Detailed version largely of metal Many separately applied details One-time series The pocket wagon is being produced exclusively for Trix Club members with at least 25 years of membership.
Club members only (Trix Club)