Freight Wagons
New for 2026: A tooling variant of the Sgnns container flat wagon with an electric superstructure from CH-Wasco in Era VI. Featuring separately applied handrails, cable anchors, handles, and fine shunting steps. The brake fittings and air reservoirs are also separate parts. The model impresses with excellent running characteristics.
In stock: 1 on the shelf, shipped within 1-3 days
New for 2025: livery variant of the Zans tank wagon in the Jet A-1 livery of the Swiss Federal Office of Civil Aviation, Era VI.
In stock: 1 on the shelf, shipped within 1-3 days
New for 2024: In the "Starke Marken" goods wagon range, a covered van with attractive advertising from the Swiss company Rapid is released.
In stock: 1 on the shelf, shipped within 1-3 days
New for 2024: high-sided open wagon in the SBB version, Era V. With its pink colour scheme, the wagon becomes the focal point on any layout and impresses with excellent running characteristics. As with the prototype, the Eaos is also a widely used vehicle in the model version and should be present several times on every model railway layout. Thanks to highly plastic engravings and a flawless paint job including appropriate printing, the PIKO model looks absolutely authentic. Particularly noticeable are the extremely finely crafted bogies, whose construction simultaneously ensures perfect track alignment. A prototype-oriented appearance in the train formation is ensured by the slot-guided coupling.
In stock: 1 on the shelf, shipped within 1-3 days
New for 2025: Covered van of the SBB in the Meili Traktoren livery, Era IV.
In stock: 1 on the shelf, shipped within 1-3 days
former DRG class district "Ulm" with steel stanchions
In stock: 1 on the shelf, shipped within 1-3 days
Livery variant of the “RYKO” drop-centre tank wagon in the version for Era VI. In the early 1990s, the first tank wagons with a so-called “drop-centre” design were built. The boiler construction was designed so that the two boiler halves each incline by 3° towards the centre. As a result, the boiler contents, mainly mineral oil products, drain out almost completely without the need for additional aids. Since the vehicles, manufactured in lightweight steel construction, are suitable for higher speeds, they were soon also procured by other companies throughout Europe. These wagons can be found as P (=Privat) wagons in the fleets of all European railway companies.
In stock: 1 on the shelf, shipped within 1-3 days
Item no.: 57747
In stock: 1 on the shelf, shipped within 1-3 days
New for 2021: Livery variant of the drop-centre tank wagon “Esso”, registered with the FS in the version of Era V. In the early 1990s, the first tank wagons with a so-called “drop-centre” design were built. The boiler construction was designed so that the two boiler halves each incline by 3° towards the centre. This allows the boiler contents, mainly mineral oil products, to drain out almost completely without the need for additional aids. As the vehicles, manufactured in lightweight steel construction, are suitable for higher speeds, they were soon also procured by other companies throughout Europe. These wagons can be found as P (=Privat) wagons in the fleets of all European railway companies.
In stock: 1 on the shelf, shipped within 1-3 days
The prototype: Not only heavy artillery is transported on the four-axle tank transporter wagon, but also lighter vehicles, such as the M113 armoured personnel carrier. The Piko model: Wagon with new running number 001-5 version with brake blocks as separately applied details. New version of the ACE brand M113 armoured personnel carrier. Has not previously been offered individually. Perfect complement to the tank transporters already supplied by Piko. Prototypical and flawless lettering.
In stock: 1 on the shelf, shipped within 1-3 days
SBB, 4-axle sliding-wall wagon type Habils "Danzas", ep. V. H0 scale (1:87), era V. Minimum radius 356.5 mm. Close coupler mechanism.
In stock: 1 on the shelf, shipped within 1-3 days
4-axle containerwagon Sgnss, grey livery, loaded with 45' container "DB Schenker". H0 scale (1:87), era VI. Minimum radius 356.5 mm. Close coupler mechanism.
In stock: 1 on the shelf, shipped within 1-3 days
4-axle containerwagon Sgnss, grey livery, loaded with 45' container "DFDS". H0 scale (1:87), era VI. Minimum radius 356.5 mm. Close coupler mechanism.
In stock: 1 on the shelf, shipped within 1-3 days
Four 2 axle mining dumpers. Service: Transportation of shallow overburden.Model: Finely detailed appearance with different running numbers.
In stock: 1 on the shelf, shipped within 1-3 days
Coach for the "Rollende Autobahn", type T2s, of the RAlpin AG. Used with the "Rollende Autobahn" Perfectly matches the low-floor wagons 76340, 76341 and 76342
In stock: 1 on the shelf, shipped within 1-3 days
The set contains three 8-axle low-floor wagons for lorry and semitrailer transports of the HUPAC. One low-floor wagon with enclosed buffer beams Suitable for block trains Matching wagon available under item no. 6600093 to form an authentic long train
In stock: 1 on the shelf, shipped within 1-3 days
8-axle low-floor intermediate coach of the HUPAC. Matching coach for wagon set item 6600092
In stock: 1 on the shelf, shipped within 1-3 days
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of HUPAC. Loaded with a truck trailer and two swap bodies from the Transco forwarding company Wagon made from die-cast metal The "T3000" mega-trailer pocket wagon is the successor of the T2000 type. The loading space is adapted to the low-lying vehicle parts of the mega-trailers. However, trailers of the older types as well as containers and interchangeable containers up to 7.82 metres long can also be loaded.
In stock: 1 on the shelf, shipped within 1-3 days
Articulated double-pocket wagon, type Sdggmrs 738/T3000e, of VTG. Wagon made of die-cast metal Loaded with two truck trailers from the Raben forwarding company Flexible equipment with standing or folded shunter's handle Prototypical model implementation of bogie
In stock: 1 on the shelf, shipped within 1-3 days
Container carrier wagon, type Sgnss, of the SBB Cargo. Each swap body has a different printing - and a logo on a different spot One swap body with coloured advertising on the front
In stock: 1 on the shelf, shipped within 1-3 days
Set of three self-unloading hopper wagons, type Falns, of the Deutsche Bahn. In traffic-red livery; available for the first time Ideal for the formation of block trains
In stock: 1 on the shelf, shipped within 1-3 days
Articulated double-pocket wagon, type Sdggmrss/T3000e, of Hupac. Wagon made from die-cast metal Loaded two 45-foot swap bodies of the forwarding agent Alberti e Santi Can be variably equipped with standing or folding shunting handle Authentic replica of the swivel joint
In stock: 1 on the shelf, shipped within 1-3 days
Set of three 2-axle open goods wagons, type Tow "Klagenfurt", of the French State Railways. Version with wooden doors
In stock: 1 on the shelf, shipped within 1-3 days
Set of two 4-axle sliding tarpaulin wagons, type Rilns, of the French State Railways. With orange tarpaulin available for the first time
In stock: 1 on the shelf, shipped within 1-3 days