Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Freight Wagons

Filter products
H0 Covered Freight Car Gltr "Kaelble" DRG
Brawa 50493 Scale H0
H0 Covered Freight Car Gltr "Kaelble" DRG

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume.After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended.New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district.As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

On order, shipped within 10-15 days

H0 Covered Freight Car IJ SNCF
Brawa 50495 Scale H0
H0 Covered Freight Car IJ SNCF

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

On order, shipped within 10-15 days

H0 Covered Freight Car Kuw CFL
Brawa 50498 Scale H0
H0 Covered Freight Car Kuw CFL

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

On order, shipped within 10-15 days

H0 Covered Freight Car Glt "A. Pöttinger" ÖBB
Brawa 50499 Scale H0
H0 Covered Freight Car Glt "A. Pöttinger" ÖBB

Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours

Regular price: CHF 49.55

On order, shipped within 10-15 days

H0 Lidded Freight Car Uk-v-25 DB
Brawa 50549 Scale H0
H0 Lidded Freight Car Uk-v-25 DB

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car K DRG
Brawa 50551 Scale H0
H0 Lidded Freight Car K DRG

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car K DRG
Brawa 50552 Scale H0
H0 Lidded Freight Car K DRG

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car K DR Brit-US-Zone
Brawa 50554 Scale H0
H0 Lidded Freight Car K DR Brit-US-Zone

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car STw SNCF
Brawa 50555 Scale H0
H0 Lidded Freight Car STw SNCF

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car K 25 ÖBB
Brawa 50556 Scale H0
H0 Lidded Freight Car K 25 ÖBB

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car Uk-V-25 DB
Brawa 50557 Scale H0
H0 Lidded Freight Car Uk-V-25 DB

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car K NS
Brawa 50568 Scale H0
H0 Lidded Freight Car K NS

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Container Car Ucs909 "akw" DB AG
Brawa 50572 Scale H0
H0 Container Car Ucs909 "akw" DB AG

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Container Car Ucs908 "dorfner" DB
Brawa 50574 Scale H0
H0 Container Car Ucs908 "dorfner" DB

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Container Car Ucs909 "Quarzwerke" DB AG
Brawa 50575 Scale H0
H0 Container Car Ucs909 "Quarzwerke" DB AG

Prototype Together with Waggon Union, Deutsche Bundesbahn (DB) developed a new twin-axle container wagon for powdered goods with two standing containers. Westwagon delivered the first 10 wagons to DB for testing in 1953. As they still had a Hik-brake system, these were designated as Kd 54. In addition, they featured a double-hook drive, as did the 150 wagons that followed from Talbot and Westwaggon. Since this led to problems associated with the unique undercarriage construction, all subsequent deliveries were equipped with running gear with single hooks. After only 50 carriages, the container volume was increased to 2 x 13.5 m³. These carriages proved themselves with aplomb – by 1965, a total of 1,232 Kds 54 had been purchased. For lighter powdered goods, 1293 Kds 56 units with 2 x 17.5 m³ containers were built in parallel. The extra volume of 4 m³ resulted in larger containers and wagons that were correspondingly taller. To secure the parked wagons, some of the Kds 54/56 were equipped with a handbrake that could be operated from the platform. Unlike DB’s other newly constructed freight cars, whose hand-brake platforms were bolted to the undercarriage, they were directly integrated on these vehicles. In this way, the length over buffers of wagons equipped in such a manner remained unchanged and only the dead weight was increased. Compared with the total number of more than 2,500 wagons built, Kds 54/56 wagons equipped with a handbrake were comparatively rare. With the introduction of the 12-digit UIC number, the Kds 54 wagons were redesignated as Ucs 908, and the Kds 56 as Ucs 909. For many years, both types formed the backbone of the Deutsche Bahn’s powder wagon stock. The first reductions in stock occurred in 1967 when 86 wagons were sold. Further sales to EVA and VTG followed in later years. In the 1990s, DB AG relocated most of its wagons to its subsidiary MEG. The remaining DB AG wagons were mostly rented out or used, for example, for the internal transport of traction sand for tractive units. Other than cement, the wagons have also been used to transport several other powdered goods over the years. These include: stone dust, silica sand, kieserite, gypsum, sodium sulphate, Thomas sulphate, sugar, salt and aluminium hydroxide. The wagons were then generally home-based at a railway station. Model Open view between the containers Individually mounted container cover and valves Brake blocks in wheel plane Individually mounted steps Individually mounted axle brake rod True to original brake unit NEM-standard short-coupling

Regular price: CHF 52.25

On order, shipped within 10-15 days

H0 Container Car BTs 30 DB, with Ekrt212 "Von Haus zu Haus"
Brawa 50595 Scale H0
H0 Container Car BTs 30 DB, with Ekrt212 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car BTs 30 DB, with Ekrt212 "Von Haus zu Haus / Zündapp"
Brawa 50596 Scale H0
H0 Container Car BTs 30 DB, with Ekrt212 "Von Haus zu Haus / Zündapp"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car BTs 30 DB, with Efkr401 "Von Haus zu Haus"
Brawa 50597 Scale H0
H0 Container Car BTs 30 DB, with Efkr401 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car BTs 30 DB, with Efkr401 "Birkel"
Brawa 50598 Scale H0
H0 Container Car BTs 30 DB, with Efkr401 "Birkel"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car BTs 30 DB, with Efkr401 "Knorr"
Brawa 50599 Scale H0
H0 Container Car BTs 30 DB, with Efkr401 "Knorr"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car Lbs577 DB, with Ekrt212 "Von Haus zu Haus"
Brawa 50600 Scale H0
H0 Container Car Lbs577 DB, with Ekrt212 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, lead time to be confirmed

H0 Container Car Lbs577 DB, with Efkr401 "Von Haus zu Haus"
Brawa 50601 Scale H0
H0 Container Car Lbs577 DB, with Efkr401 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car BTs 30 DB, with Eoskrt022 "Von Haus zu Haus"
Brawa 50602 Scale H0
H0 Container Car BTs 30 DB, with Eoskrt022 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, shipped within 10-15 days

H0 Container Car Lbs577 DB, with Eoskrt022 "Von Haus zu Haus"
Brawa 50603 Scale H0
H0 Container Car Lbs577 DB, with Eoskrt022 "Von Haus zu Haus"

Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps

Regular price: CHF 58.55

On order, lead time to be confirmed