Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Freight Wagons

Filter products
H0 Luggage Car Pw4ü DRG
Brawa 51304 Scale H0
H0 Luggage Car Pw4ü DRG

Prototype When it first became evident that iron express train cars carriages were going to be a success, the Preußische Staatsbahn purchased additional four-axle luggage cars in the "iron construction type". The principal dimensions of the existing wooden cars were retained, though the construction design was modified for the use of iron profiles. One external modification was the replacement of doors fitted in niches at the end of the cars with a slanted design for the entire rear end. Other features included rivets like the ones found on the side walls of passenger cars and the omission of the truss rods. This is the design used for express train cars with concertina walls and for express trains that had compartment passenger cars without connecting gangways until the late nineteen twenties. Prussian-type luggage cars were typical features of express trains until the nineteen fifties. Many of them passed on to the DB and DR. Model True to original bogies True to scale side frames Tip bearing wheelsets True to original bellows Multi-part brake systems Brake blocks in wheel plane

Regular price: CHF 95.55

On order, shipped within 10-15 days

H0 Luggage Car Pw4ü DB
Brawa 51308 Scale H0
H0 Luggage Car Pw4ü DB

Prototype Celebrate 100 years of the iconic BR 01 express locomotive with us! To mark this special occasion, we are proud to present a faithful recreation of the legendary E 230 train formation, which carried passengers from Dortmund to Cologne in the latter half of the 1950s. The E 230 was the quintessential example of a post-war express train, composed of six pre-war express train coaches paired with modern “yl” city express coaches. All the passenger coaches came from the inventory of Dortmund Hauptbahnhof, showcasing the diverse fleets operated by the railway companies of that era. The train’s locomotive, by contrast, originated from the Cologne Betriebsbahnhof railway depot. The BR 01 or BR 03 were commonly used on this route, including the renowned 01 100, which has been faithfully recreated in our model. With its powerful build and striking appearance, the BR 01 defined the look of the express train services of its time. On its northern route, the E 230 express train carried passengers through the Ruhr region: Dortmund Hauptbahnhof – Rauxel – Herne – Wanne-Eickel – Gelsenkirchen – Essen-Altenessen – Oberhausen – Duisburg – Düsseldorf. This train reached its final destination in the late afternoon: Cologne Hauptbahnhof. Evoke the spirit of the 1950s with the BRAWA Express Train Locomotive BR 01 and its matching passenger coaches – customisable to your preferences for an authentic and nostalgic addition to your model railway layout! Model True to original bogies True to scale side frames Tip bearing wheelsets True to original bellows Multi-part brake systems Brake blocks in wheel plane

Regular price: CHF 95.55

On order, lead time to be confirmed

H0 Luggage Car Pw4ü DB
Brawa 51309 Scale H0
H0 Luggage Car Pw4ü DB

Prototype Celebrate 100 years of the iconic BR 01 express locomotive with us! To mark this special occasion, we are proud to present a faithful recreation of the legendary E 230 train formation, which carried passengers from Dortmund to Cologne in the latter half of the 1950s. The E 230 was the quintessential example of a post-war express train, composed of six pre-war express train coaches paired with modern “yl” city express coaches. All the passenger coaches came from the inventory of Dortmund Hauptbahnhof, showcasing the diverse fleets operated by the railway companies of that era. The train’s locomotive, by contrast, originated from the Cologne Betriebsbahnhof railway depot. The BR 01 or BR 03 were commonly used on this route, including the renowned 01 100, which has been faithfully recreated in our model. With its powerful build and striking appearance, the BR 01 defined the look of the express train services of its time. On its northern route, the E 230 express train carried passengers through the Ruhr region: Dortmund Hauptbahnhof – Rauxel – Herne – Wanne-Eickel – Gelsenkirchen – Essen-Altenessen – Oberhausen – Duisburg – Düsseldorf. This train reached its final destination in the late afternoon: Cologne Hauptbahnhof. Evoke the spirit of the 1950s with the BRAWA Express Train Locomotive BR 01 and its matching passenger coaches – customisable to your preferences for an authentic and nostalgic addition to your model railway layout! Model True to original bogies True to scale side frames Tip bearing wheelsets True to original bellows Multi-part brake systems Brake blocks in wheel plane

Regular price: CHF 113.60

On order, lead time to be confirmed

H0 Luggage Car Pw4ü DB
Brawa 51310 Scale H0
H0 Luggage Car Pw4ü DB

Prototype Celebrate 100 years of the iconic BR 01 express locomotive with us! To mark this special occasion, we are proud to present a faithful recreation of the legendary E 230 train formation, which carried passengers from Dortmund to Cologne in the latter half of the 1950s. The E 230 was the quintessential example of a post-war express train, composed of six pre-war express train coaches paired with modern “yl” city express coaches. All the passenger coaches came from the inventory of Dortmund Hauptbahnhof, showcasing the diverse fleets operated by the railway companies of that era. The train’s locomotive, by contrast, originated from the Cologne Betriebsbahnhof railway depot. The BR 01 or BR 03 were commonly used on this route, including the renowned 01 100, which has been faithfully recreated in our model. With its powerful build and striking appearance, the BR 01 defined the look of the express train services of its time. On its northern route, the E 230 express train carried passengers through the Ruhr region: Dortmund Hauptbahnhof – Rauxel – Herne – Wanne-Eickel – Gelsenkirchen – Essen-Altenessen – Oberhausen – Duisburg – Düsseldorf. This train reached its final destination in the late afternoon: Cologne Hauptbahnhof. Evoke the spirit of the 1950s with the BRAWA Express Train Locomotive BR 01 and its matching passenger coaches – customisable to your preferences for an authentic and nostalgic addition to your model railway layout! Model True to original bogies True to scale side frames Tip bearing wheelsets True to original bellows Multi-part brake systems Brake blocks in wheel plane

Regular price: CHF 118.15

On order, lead time to be confirmed

N Refrigerator Car UIC St. 1 "Interfrigo" DB
Brawa 67119 Scale N
N Refrigerator Car UIC St. 1 "Interfrigo" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Fine paintwork and painting NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Refrigerator Car UIC St. 1 "Interfrigo" DB
Brawa 67120 Scale N
N Refrigerator Car UIC St. 1 "Interfrigo" DB

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Fine paintwork and painting NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Refrigerator Car Ibes "STEF" SNCF
Brawa 67121 Scale N
N Refrigerator Car Ibes "STEF" SNCF

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Fine paintwork and painting NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Refrigerator Car UIC St. 1 "evian & Badoit" SNCF
Brawa 67122 Scale N
N Refrigerator Car UIC St. 1 "evian & Badoit" SNCF

Prototype The International Union of Railways (Union internationale des chemins de fer, UIC) founded its own research and development institute (ORE) in 1949, thus laying the foundation for internationally standardised construction principles for goods wagons. The European railway administrations soon developed their own vehicles on the basis of the ORE’s designs and principles for a two-axle standard goods wagon. In accordance with the fundamental idea put forward by the UIC, these were used within the territories of the member administrations to transport goods and freight. The German Federal Railway (Deutsche Bundesbahn) took the first steps via an initial procurement of around 3,500 wagons (as per the preliminary designs) and, with the Gmm(e)hs 56, successfully put the first 2,662 genuine UIC standard wagons into service as early as 1957. Externally, the standardised design was indicated by the inscription RIV St UIC. Other railway administrations, including the SNCF, FS, ÖBB, NS, DSB, MAV, P.K.P., CFL, SBB, acted in a similar way and produced their own versions of the UIC standard wagons. The wagons are all very similar due to this fact, however they also include some country-specific design differences. Since DB had a very high demand for new wagons and there was also a modernisation backlog for older wagon classes, they did not solely rely on brand new UIC St wagons. The wagon types Gmms 44, Gmm(eh)s 60, Gmms 40 and 216 were gradually created via several conversion programmes in which individual parts from older wagons were reused. With over 100,000 units built, these wagon types became synonymous with goods traffic in Europe and were used in almost every goods train from the 1960s to the 1990s. Model Fine paintwork and painting NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Tank Car 4-axle Zas-w DR
Brawa 67259 Scale N
N Tank Car 4-axle Zas-w DR

Prototype In the 1970s, the works of the GDR coach building industry produced almost exclusively for export. The DR therefore had to look elsewhere to replace the ageing fleet of vehicles and have more vehicles available for the increased transport requirements. This was partly solved by producing new cars in own repair shops but this technology was not suitable for special cars. At the beginning of the 1970s, the foreign trade ministry succeeded in concluding comprehensive compensation business with France, as a result of which the DR received approx. 20,000 new freight cars of various classes. Among these, 1,250 four-axle mineral oil tank cars were delivered from 1975 onwards, which were classified under the documentation number 8105 and Class Uahs. Their number group began with 727 0000. The car had a welded undercarriage made of St 52-3 without middle longitudinal supports with bogies of type Y25Cs and a divided draw gear. The five-section tank made of 7mm steel plate (9mm in the floor area) has a volume of 85150 litres and therefore allows complete exploitation of the maximum permissible wheelset load at that time of 20t. The compressed air brake of type KE-GP with brake rod actuators and mechanical load braking was complemented by a handbrake operated from a platform and complied with the latest technical standards of that time. The cars were used above all in block trains mainly to transport fuels such as petrol and diesel. Model Fine replica of the Y-25 bogies Precise paintwork and painting NEM-standard short-coupling True to original brake unit

Regular price: CHF 47.75

On order, shipped within 10-15 days

N Freight Car Gmhs DRG
Brawa 67329 Scale N
N Freight Car Gmhs DRG

Prototype With the beginning of World War II and the sharp increase in transportation tasks, the DRG suffered from a striking wagon shortage. The only possible remedy was the construction of new wagon types in order to increase the load capacity and loading space volume on the one hand and to reduce the necessary steel consumption drastically on the other hand. Among others, the twoaxle Gmhs Bremen goods wagon was built as part of these efforts. In comparison with the most recent design, the Ghs Oppeln, the wheel base was enlarged by 1 metre, increasing the loading space by 5 m³. Furthermore, almost 2 tonnes of steel were saved per wagon, pushing the net weight down below 10 tonnes. From 1943 to January 1945, a total of 7,230 wagons were built in this way. 3,440 of them were equipped with a handbrake platform protruding over the buffers on one side, increasing the wagon length by only 100 mm. As a result of the war events, the wagons were spread all over Europe so that Gmhs “Bremen” wagons were found in almost all Central-European countries. The wagons were exchanged between the different railways only in part, and not at all between the countries of the later Eastern bloc and Western Europe. Model Precise paintwork and painting Finely engraved fan grill True to original brake unit on the car bottom NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Covered Freight Car Gmhs DR
Brawa 67330 Scale N
N Covered Freight Car Gmhs DR

Prototype With the beginning of World War II and the sharp increase in transportation tasks, the DRG suffered from a striking wagon shortage. The only possible remedy was the construction of new wagon types in order to increase the load capacity and loading space volume on the one hand and to reduce the necessary steel consumption drastically on the other hand. Among others, the twoaxle Gmhs Bremen goods wagon was built as part of these efforts. In comparison with the most recent design, the Ghs Oppeln, the wheel base was enlarged by 1 metre, increasing the loading space by 5 m³. Furthermore, almost 2 tonnes of steel were saved per wagon, pushing the net weight down below 10 tonnes. From 1943 to January 1945, a total of 7,230 wagons were built in this way. 3,440 of them were equipped with a handbrake platform protruding over the buffers on one side, increasing the wagon length by only 100 mm. As a result of the war events, the wagons were spread all over Europe so that Gmhs “Bremen” wagons were found in almost all Central-European countries. The wagons were exchanged between the different railways only in part, and not at all between the countries of the later Eastern bloc and Western Europe. Model Precise paintwork and painting Finely engraved fan grill True to original brake unit on the car bottom NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Covered Freight Car Gms35 "Miele" DB
Brawa 67332 Scale N
N Covered Freight Car Gms35 "Miele" DB

Prototype With the beginning of World War II and the sharp increase in transportation tasks, the DRG suffered from a striking wagon shortage. The only possible remedy was the construction of new wagon types in order to increase the load capacity and loading space volume on the one hand and to reduce the necessary steel consumption drastically on the other hand. Among others, the twoaxle Gmhs Bremen goods wagon was built as part of these efforts. In comparison with the most recent design, the Ghs Oppeln, the wheel base was enlarged by 1 metre, increasing the loading space by 5 m³. Furthermore, almost 2 tonnes of steel were saved per wagon, pushing the net weight down below 10 tonnes. From 1943 to January 1945, a total of 7,230 wagons were built in this way. 3,440 of them were equipped with a handbrake platform protruding over the buffers on one side, increasing the wagon length by only 100 mm. As a result of the war events, the wagons were spread all over Europe so that Gmhs “Bremen” wagons were found in almost all Central-European countries. The wagons were exchanged between the different railways only in part, and not at all between the countries of the later Eastern bloc and Western Europe. Model Precise paintwork and painting Finely engraved fan grill True to original brake unit on the car bottom NEM-standard short-coupling

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Covered Freight Car G10 DB
Brawa 67494 Scale N
N Covered Freight Car G10 DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 36.90

On order, shipped within 10-15 days

N Covered Freight Car Gklm191 DB
Brawa 67495 Scale N
N Covered Freight Car Gklm191 DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 36.90

On order, shipped within 10-15 days

N Covered Freight Car (Gw) G DR
Brawa 67496 Scale N
N Covered Freight Car (Gw) G DR

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 36.90

On order, shipped within 10-15 days

N Covered Freight Car G ÖBB
Brawa 67497 Scale N
N Covered Freight Car G ÖBB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 36.90

On order, shipped within 10-15 days

N Tank Car Uerdingen ZZr DR
Brawa 67725 Scale N
N Tank Car Uerdingen ZZr DR

Prototype In 1939/40, the Köln-Deutz (Cologne-Deutz) and Uerdingen wagon factories each constructed a quadruple axle tank wagons in a lightweight design. Directly related to this, Westwaggon also manufactured the prototype of the tub-style tender, with which the war locomotives belonging to the BR 42 and 52 were coupled. The development was primarily driven by the military since it was necessary to transport enormous amounts of crude oil and fuels for replenishment purposes. As was the case with all war designs, the lightweight design was fully utilised in order to maximise the potential of the available steel quota. However, it soon became apparent that this was done to the detriment of the durability. At this point, both manufacturers were developing wagons with self-supporting tanks. Whilst Deutz left it at puffer beams, the Uerdinger design also boasted solebars manufactured from bevelled profiles that were intended to contribute in absorbing longitudinal compression forces. The main data of both versions was identical: The length over buffers amounted to 12.40 m, the bogie pivot distance amounted to 6.60 m and the tank contained 63 m3. As a result of the compact design, this amount lead to axle and metre load problems, meaning that it was not possible to completely fill the tank on all routes. Pressed sheet metal bogies with a 2.00 m wheel base were used as the running gear. The wagons that were built up until 1945 were deployed at "Wifo" (scientific research community) and oil associations in order to supply the German Armed Forces. After 1945, various European companies reproduced the wagons in a more advanced form, as did Tatra in Prague in 1946. In 1955, SEAG supplied almost 500 units of the wagons developed from the Uerdingen design to the United States Transportation Corps (USTC). Due to the war, many wagons were lost or remained in the territories of other European state railways . The wagons located in the catchment area of the western occupation zones made their way to VTG, which emerged from the former "Wifo" in 1951. In addition to this, mineral oil companies deployed further wagons in the form of P wagons and emerged as main tenants of the VTG wagons. The wagons that stayed with DR remained in the inventory of the state railway and were only leased out on a long-term basis, primarily to PCK Schwedt/ Oder in this case. The last wagons were only removed from the inventory in the 1990s and were being used as maintenance cars or station wagons. In this guise, they could still be regularly seen after the turn of the millennium. Model Brake blocks in wheel plane Separately mounted buffers Precise paintwork and painting Freestanding placards Metal wheels True to original frame construction

Regular price: CHF 40.50

On order, shipped within 10-15 days

N Covered Freight Car Gbs-uv253 "BASF Trocken Eis" DB
Brawa 67812 Scale N
N Covered Freight Car Gbs-uv253 "BASF Trocken Eis" DB

Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 - 1958 - up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model NEM-standard short-coupling Bogie with three-point support True to original brake unit on the car bottom Metal wheels Precise paintwork and painting True to original frame construction

Regular price: CHF 38.35

On order, shipped within 10-15 days

N Covered Freight Car Glmhs50 DB
Brawa 67820 Scale N
N Covered Freight Car Glmhs50 DB

Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 - 1958 - up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model NEM-standard short-coupling Bogie with three-point support True to original brake unit on the car bottom Metal wheels Precise paintwork and painting True to original frame construction

Regular price: CHF 38.35

On order, shipped within 10-15 days

10% off the recommended price
Feldbahn starter set with tipper wagons
Busch 12000 Scale H0
Feldbahn starter set with tipper wagons

Gmeinder 15/18 PS field railway locomotive in open version with 2 tipping lorries, 8 curved tracks with a radius of 115 mm, 1 straight track and 1 connecting track, each 133.2 mm long. Including battery box with switch (forward/reverse/stop).

Selling price: CHF 212.00 RRP CHF 235.80

On order, lead time to be confirmed

10% off the recommended price
Garden railway starter set
Busch 12003 Scale H0
Garden railway starter set

Feldbahn locomotive « LKM Ns2f » in closed version. Colour scheme: dark green with black running gear. Bogie stanchion wagon with tree trunks and low-sided open wagon with wooden superstructure. 8 curved tracks, radius 115 mm, 1 straight track and 1 connection track, each 133.2 mm. Incl. battery box with switch (forward/reverse/stop).

Selling price: CHF 223.00 RRP CHF 248.20

On order, lead time to be confirmed

10% off the recommended price
Feldbahn starter set with steam locomotive
Busch 12011 Scale H0
Feldbahn starter set with steam locomotive

Feldbahn locomotive Gmeinder 15/18 PS in open version with 2 contents: Feldbahn steam locomotive 'Decauville Typ 3' and a bogie end-wall wagon with brake platform and timber load (length: 70 mm), 8 curved tracks radius 115 mm, 1 straight track and 1 connection track each 133.2 mm. Incl. battery box with switch (forward/reverse/stop).

Selling price: CHF 241.00 RRP CHF 268.20

On order, lead time to be confirmed

10% off the recommended price
Feldbahn starter set "timber transport"
Busch 12012 Scale H0
Feldbahn starter set "timber transport"

Gmeinder 15/18 PS field railway locomotive in open version with long timber trailer, 8 curved tracks radius 115 mm, 1 straight track and 1 connection track each 133.2 mm. Incl. battery box with switch (forward/reverse/stop).

Selling price: CHF 223.00 RRP CHF 248.20

On order, lead time to be confirmed

10% off the recommended price
Feldbahn starter set « Brick transport »
Busch 12014 Scale H0
Feldbahn starter set « Brick transport »

Gmeinder 15/18 field railway diesel locomotive in closed version with working headlight and 2 brick transport wagons, 8 curved tracks radius 115 mm, 1 straight track and 1 connection track each 133.2 mm. Incl. battery box with switch (forward/reverse/stop).

Selling price: CHF 212.00 RRP CHF 235.80

On order, lead time to be confirmed