Freight Wagons
The K2 and K3 wagons are undoubtedly among the standard goods wagons of Switzerland. Both were built for many years (the K2 since 1900, the K3 since 1913), and they were available – with identical main dimensions – in various versions with different wheelbases. The SBB kept these partially outdated classes in service for a long time, so that the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, so that various buffer, door variants and wheelsets are available, enabling a variety of versions through the eras. Variant with sleeve buffers, solid wheels and aluminium door Model features Consideration of all epochal differences many separately applied details Close coupling with NEM coupling pocket Extensive and detailed printing Partially spoked wheels Length over buffers: 52.1 mm
On order, shipped within 4-5 days
The K2 and K3 covered vans are undoubtedly among the standard goods wagons of Switzerland. Both were built for many years (the K2 since 1900, the K3 since 1913), and they exist – with identical main dimensions – in various versions with different wheelbases. The SBB kept these partially obsolete classes in service for a long time, so that the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, so that various buffer, door variants and wheelsets are available, which enable a variety of variants through the eras. RM staff car / magazine car, variants with sleeve buffers, solid wheels and aluminium door Model features Consideration of all era-specific differences many separately applied details Close coupling with NEM coupling pocket Extensive and detailed printing Partially spoked wheels Length over the buffers: 52.1 mm
On order, shipped within 4-5 days
The K2 and K3 covered vans are undoubtedly among the standard goods wagons of Switzerland. Both types were built for many years (the K2 since 1900, the K3 since 1913), and they were available in various versions with different wheelbases, despite having the same main dimensions. The SBB kept these partially obsolete classes in service for a long time, so the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, offering a choice of different buffer, door, and wheelset variants that enable a wide variety of versions across the eras. Variants with sleeve buffers, solid wheels and an aluminium door Model features Consideration of all era-specific differences many separately applied details Close coupling with a guide mechanism and NEM coupling pocket Extensive and detailed printing Partially spoked wheels
On order, shipped within 4-5 days
The K2 and K3 wagons are undoubtedly among the standard goods wagons of Switzerland. Both were built for many years (the K2 since 1900, the K3 since 1913), and they were available in various versions with different wheelbases, despite having the same main dimensions. The SBB kept these partially obsolete classes in service for a long time, so the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, offering a choice of various buffer, door, and wheelset variants, which enable a wide variety of versions across the eras. K3 as a loan coach Gm of the Stat. Hannover-Linden, Ep.I, operating condition 1920. Variant with rod buffers, full wheels and steel door Model features Consideration of all era-specific differences many separately applied details Close coupling with NEM coupling pocket Extensive and detailed printing Partially spoked wheels
On order, shipped within 4-5 days
The K2 and K3 covered vans are undoubtedly among the standard goods wagons of Switzerland. Both were built for many years (the K2 since 1900, the K3 since 1913), and they were available – with identical main dimensions – in various versions with different wheelbases. The SBB kept these partially obsolete classes in service for a long time, so that the K2 was still in operation well into the 1980s. The Hobbytrain model has been completely newly designed and is constructed like a kit, so that various buffer, door variants and wheelsets are available, enabling a variety of versions through the eras. Transport wagon for elephants and giraffes of the Knie Circus, variants with sleeve buffers, solid wheels and aluminium doors Model features Consideration of all era-specific differences many separately applied details Close coupling with NEM coupling pocket Extensive and detailed printing Partially spoked wheels
On order, shipped within 4-5 days
Car-carrying trains have a long tradition in Germany – in 1956, the Deutsche Bundesbahn launched the first car-carrying train from Hamburg to Chiasso. By 1988, the Deutsche Bundesbahn’s car-carrying service comprised 2,929 car-carrying trains, as well as 484 express trains with car-carrying capacity. In 2017, ÖBB took over car-carrying train operations from Deutsche Bahn AG and integrated them into its night train division, Nightjet. The trains use four-axle car-carrier wagons of the DDm915 type, acquired in the 1970s.
Pre-order, release expected in March 2027
Six-plank sliding-wall van Six-plank sliding-wall van with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious van is equipped with sliding walls that can be moved by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and level ground. This van is equipped with the "lockable bulkheads" transport protection device for the gentle transport of highly sensitive goods of various kinds. With transport protection devices, the van body can be divided into individual compartments. The vans are used in different versions by DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB vans are particularly striking with full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions.
On order, shipped within 4-5 days
Six-plank covered van with two-part aluminium sliding walls and six lockable bulkheads. When it comes to sensitive loads: this spacious van is equipped with sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This van is designed for the careful transport of highly sensitive goods of various kinds, featuring the “lockable bulkheads” transport protection system. With transport protection systems, the wagon body can be divided into individual compartments. The vans are in service with various operators, including DB Cargo, SBB Cargo, PKP Cargo, SNCF, and FS. Some of the SBB vans are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of the type differences, e.g. door mechanism, GPS antenna, etc. Applied etched parts, filigree grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket Length over buffers: 95.6 mm
On order, lead time to be confirmed
Six-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious wagon is fitted with sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is thus possible from both a ramp and level ground. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle carriage of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are in service with DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS in various versions. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of the type differences, e.g. door mechanism, GPS antenna, etc. Applied etched parts, filigree grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket Length over the buffers: 95.6 mm
On order, shipped within 4-5 days
Graffiti on rolling stock To the great annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even reflection. A series of large-scale motifs has been applied to numerous Hbbillns sliding-wall vans of the SBB. The series "Zukunft ist Luxus" (The Future is Luxury) created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the "Wholecars", all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall van is printed on both sides in an absolutely authentic and prototypical manner. Model features Consideration of design differences, e.g. door mechanism, GPS antenna, etc. Extensive and detailed printing Applied etched parts, filigree grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket Length over buffers: 95.6 mm
Pre-order, release expected in February 2027
To the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even thought. A series of large-scale motifs has been applied to numerous Hbbillns sliding-wall vans of the SBB. The series "Zukunft ist Luxus" (The Future is Luxury) created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the "Wholecars", all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall van is printed on both sides in an absolutely authentic and prototypical manner. Model features Consideration of design differences, e.g. door mechanism, GPS antenna, etc. Extensive and detailed printing Applied etched parts, filigree grab rails Metal chassis with smoothly running axles Close coupling with NEM coupling pocket Length over buffers: 95.6 mm
Pre-order, release expected in February 2027
Six-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious wagon is fitted with sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle carriage of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are in service with DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features Consideration of design differences, e.g. door mechanism, GPS antenna, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket Length over buffers: 95.6 mm
Pre-order, release expected in February 2027
Two-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When it comes to sensitive loads: this spacious wagon is equipped with sliding walls that can be operated by one person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is thus possible from both a ramp and level ground. This wagon is designed for the gentle transport of highly sensitive goods of various kinds, featuring the “lockable bulkheads” transport protection system. With transport protection systems, the wagon interior can be divided into individual compartments. The wagons are used in various versions by DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of the type differences, e.g. door mechanism, GPS antenna, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with a guide mechanism and NEM coupling pocket Length over the buffers: 95.6 mm
On order, lead time to be confirmed
Two-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. This spacious wagon is equipped with sliding walls that can be operated by a single person, making it ideal for delicate loads. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This wagon is designed for the gentle transport of highly sensitive goods of various kinds, featuring the "lockable bulkheads" transport protection system. With these transport protection systems, the wagon interior can be divided into individual compartments. The wagons are in service with various operators, including DB Cargo, SBB Cargo, PKP Cargo, SNCF, and FS. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions.
On order, shipped within 4-5 days
Starting in 1941, the Uerdingen Wagon Factory, together with several other companies such as MAN, built over 3,700 lightweight tank wagons. The two-axle wagons had a capacity of 30 m³. During the Second World War, the wagons were supplied to almost all European railway administrations and, as in Germany, were still used in some cases well into the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Starting in 1941, the Uerdingen Wagon Factory, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were delivered to almost all European railway administrations and were used in Germany, in part, until the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Starting in 1941, the Waggonfabrik Uerdingen, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were supplied to almost all European railway administrations and were used in Germany, in some cases, well into the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Starting in 1941, the Wagon Factory Uerdingen, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were delivered to almost all European railway administrations and were used in Germany, in part, until the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Starting in 1941, the Uerdingen Wagon Factory, together with several other companies such as MAN, built over 3700 lightweight tank wagons. The two-axle wagons had a capacity of 30m3. During the Second World War, the wagons were supplied to almost all European railway administrations and, as in Germany, were still used in some cases into the early 2000s. Model features New tooling Consideration of all design differences With and without brake cabin Applied etched parts Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Six-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. When the cargo is sensitive: this spacious wagon is fitted with sliding walls that can be operated by one person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is thus possible from both a ramp and ground level. This wagon is equipped with the “lockable bulkheads” transport protection device for the gentle carriage of highly sensitive goods of various kinds. With transport protection devices, the wagon interior can be divided into individual compartments. The wagons are in service in various versions with DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB wagons are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, delicate grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
On order, lead time to be confirmed
Six-plank covered van Six-plank covered van with two-part aluminium sliding walls and six lockable bulkheads. When it comes to sensitive loads: this spacious van is equipped with sliding walls that can be operated by a single person. In the open position, access to the entire loading area is possible from both sides. Loading and unloading with forklifts is therefore possible from both a ramp and ground level. This van is designed for the gentle transport of highly sensitive goods of various kinds, featuring the “lockable bulkheads” transport protection system. With transport protection systems, the van body can be divided into individual compartments. The vans are in service with various operators, including DB Cargo, SBB Cargo, PKP Cargo, SNCF and FS. Some of the SBB vans are particularly striking due to full-page comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
On order, shipped within 4-5 days
The Prototype: Based on the design of the coaches supplied to the Deutsche Bundesbahn, Josef Meyer AG in Rheinfelden produced a total of 600 sliding-wall vans for the SBB between 1990 and 1994. The Italian and Polish state railways also operate this type of wagon. Later, the coaches were converted with plastic brake soles to reduce noise. Some coaches were used as advertising carriers and received full-body advertisements. - Complete new tooling - Consideration of design differences, e.g. door mechanism - Various GPS antennas - Applied etched parts, filigree grab rails - Metal chassis with smooth-running axles - Close coupling with NEM coupling pocket - Minimum radius: 358 mm
On order, shipped within 4-5 days
Two-axle goods wagon with two-part aluminium sliding walls and six lockable bulkheads. This high-capacity wagon is equipped with sliding walls that can be operated by one person, making it ideal for delicate loads. When open, the entire loading area is accessible from both sides, allowing forklift loading and unloading from either a ramp or ground level. The wagon is designed for the gentle transport of highly sensitive goods of various kinds, using the “lockable bulkheads” transport protection system. This system allows the wagon interior to be divided into separate compartments. These wagons are in service with DB Cargo, SBB Cargo, PKP Cargo, SNCF, and FS. Some SBB wagons are particularly striking due to full-side comic graffiti. Our model takes into account the design differences between the DB and SBB versions. Model features New tooling Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
On order, shipped within 4-5 days
To the annoyance of the railways, thousands of coaches and railcars are covered in graffiti every year – but it must also be admitted that there are always motifs that provoke a smile or even thought. A series of large-scale motifs has been applied to numerous Hbbillns sliding-wall wagons of the SBB. The series "The Future is Luxury" created various motifs around capitalism, the refugee crisis and so-called First World Problems. When spraying the "Wholecars", all lettering fields are deliberately left blank by the artist, as this increases the chance that the graffiti will not be removed. Each sliding-wall wagon is printed on both sides with absolutely authentic and prototypical lettering. Model features Consideration of design differences, e.g. door mechanism (DB/SBB), various GPS antennas, etc. Applied etched parts, fine grab rails Metal chassis with smooth-running axles Close coupling with NEM coupling pocket
Pre-order, release expected in June 2027