Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Uhlenbrock 67600 · SD 2 function decoder

Product information "SD 2 function decoder"

Points and signals with a solenoid drive that are to be controlled digitally must be fitted with a solenoid accessory decoder. Lamps, colour-light signals or track sections that are to be switched on and off digitally are digitalised with a switching decoder.

For Motorola and DCC digital systems

Depending on the type, for pulsed or continuous current

Large address range

Free choice of address

Address setting at the push of a button

Relay contacts with potential-free outputs

High load: 1 A per output

Simple connection

Size: 38 x 32 x 15 mm

Uhlenbrock solenoid accessory and switching decoders can be used in Märklin, Motorola and DCC digital systems. In Motorola mode, addresses 1–320 can be addressed with the Intellibox, and addresses 1–256 with other command stations. In DCC mode, addresses 1–2048 are possible. The addresses are not preset. They can be freely chosen independently of one another. Each module has two outputs. Depending on the type, both outputs can be addressed together under one address or independently of one another under two addresses.

The relay contacts of the switching decoders have potential-free outputs and can be connected as required. Each output can carry a load of 1 A. By limiting the connections to two per module, cable runs stay short and the wiring of the layout stays clear. Connection is conveniently made via screw terminals. Setting the address is extremely simple. First the decoder's programming button and then the corresponding point button on the control panel are pressed. The decoder simply remembers the corresponding address. The decoders are supplied with operating voltage and control information from the digital command station.

Universal switching decoder with two potential-free changeover contacts that can be addressed independently of one another under two addresses. The decoder switches two different loads independently of one another, for example lamps or motorised point drives.

Art. no. 67600 SD2 switching decoder

Identification

Barcode 4033405676002