Scenery
Super-detailed models with model-accurate headlights, tail lamps, and a mounted signal bar (without function).
On order, lead time to be confirmed
Super-detailed models with model-accurate headlights, tail lamps, and a mounted signal bar (without function).
On order, lead time to be confirmed
Super-detailed models with model-accurate headlights and tail lamps (without function).
On order, lead time to be confirmed
2 pieces, 0–50 mm tapering, length each approx. 92 cm, top width approx. 35 mm, bearing width at the front bottom approx. 37 mm, at the rear approx. 80 mm.
On order, lead time to be confirmed
With needle flocking, 205 mm high.
On order, lead time to be confirmed
With needle flocking, 220 mm high.
On order, lead time to be confirmed
Specifically designed for large-scale and garden railways, easy to cut with scissors or a knife. Size: 335 x 140 mm.
On order, lead time to be confirmed
Snow-covered fir tree with 9 candle-style lamps, approx. 195 mm high. Ready to connect to a transformer 14-16 V, DC or AC voltage. Also suitable for Christmas cribs.
On order, lead time to be confirmed
Framo or perhaps rather Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956 Framo in Hainichen). Due to its origins, it was therefore more often referred to as the Framo V901/2 and was so designated from 1956 onwards. Retaining the technology, the three-quarter-tonner Framo V901 of the then DDR vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 type.
On order, lead time to be confirmed
Framo or perhaps more accurately Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956, Framo in Hainichen). Due to its origins, it was therefore more often referred to as the Framo V901/2 and so designated from 1956 onwards. Retaining the technology, the three-quarter-tonne Framo V901 of the then East German vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 model.
On order, lead time to be confirmed
Framo or perhaps more accurately Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956, Framo in Hainichen). Due to its origins, it was therefore more often referred to as the Framo V901/2 and was designated as such from 1956 onwards. Retaining the technology, the three-quarter tonne Framo V901 of the then East German vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 model.
On order, lead time to be confirmed
Framo or perhaps more accurately Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956, Framo in Hainichen). Due to its origins, it was therefore more often referred to as the Framo V901/2 and was designated as such from 1956 onwards. Retaining the technology, the three-quarter-tonner Framo V901 of the then East German vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 model.
On order, lead time to be confirmed
Framo or perhaps more accurately Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956 known as Framo in Hainichen). Due to its origins, it was therefore more commonly referred to as the Framo V901/2 and was designated as such from 1956 onwards. Retaining the technology, the three-quarter-tonne Framo V901 of the then East German vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 model.
On order, lead time to be confirmed
Framo or perhaps more accurately Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956, Framo in Hainichen). Due to its origins, it was therefore more often referred to as the Framo V901/2 and was designated as such from 1956 onwards. Retaining the technology, the three-quarter-tonner Framo V901 of the then East German vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 model.
On order, lead time to be confirmed
Framo or perhaps more accurately Barkas??? Between 1954 and 1961, the small van Barkas V901/2 was produced at the VEB Barkas-Werke in Karl-Marx-Stadt (until 1956, Framo in Hainichen). Due to its origins, it was therefore more often referred to as the Framo V901/2 and was designated as such from 1956 onwards. Retaining the technology, the three-quarter-tonne Framo V901 of the then East German vehicle industry was given a new exterior design in 1954 and further developed into the V901/2 model.
On order, lead time to be confirmed
The state-owned automobile plant AvtoVAZ, based in Togliatti, Russia, produced the Shiguli model, also known as the Lada 2101 (export name, meaning «the Beloved»/«Darling»), based on the Fiat 124. In the first year of production, 200,000 units of the 60 hp Lada rolled off the assembly line, and the former cult vehicle of the GDR can still be found on the roads today.
On order, lead time to be confirmed
The state-owned automobile plant AvtoVAZ (Volga Automobile Plant) based in Togliatti, Russia, produced the Shiguli model, also known as the Lada 2101 (export name, meaning “the Beloved”/“Darling”), based on the Fiat 124. In the first year of production, 200,000 units of the 60 hp Lada rolled off the production line, and the former cult vehicle of the GDR can still be found on the roads today.
On order, lead time to be confirmed
The state-owned automobile plant AvtoVAZ, based in Togliatti, Russia, produced the Shiguli or Lada 2101 model (export name, meaning "the Beloved" / "Darling" in German) based on the Fiat 124 prototype.
On order, lead time to be confirmed
The Lada Niva, also known as the Lada 4x4 or WAS-2121, is an off-road vehicle that has been produced by the Russian car manufacturer AvtoVAZ in Togliatti since 1977.
On order, lead time to be confirmed
Production of the EMW 340 began in 1949, originally under the name BMW 340, at the Eisenacher Motorenwerk (EMW) in Eisenach, Thuringia.
On order, lead time to be confirmed
Production of the EMW 340 began in 1949, originally under the name BMW 340, at the Eisenacher Motorenwerk (EMW) in Eisenach, Thuringia.
On order, lead time to be confirmed
Production of the EMW 340 began in 1949, originally under the name BMW 340, at the Eisenacher Motorenwerk (EMW) in Eisenach, Thuringia.
On order, lead time to be confirmed
The Dacia 1300 is a car developed on the basis of the Renault 12 and produced by the Romanian car brand Dacia between 1969 and 1982 (while production of the Renault 12 ended as early as 1980).
On order, lead time to be confirmed
The Dacia 1300 is a car based on the Renault 12, produced by the Romanian car brand Dacia between 1969 and 1982 (while production of the Renault 12 ended as early as 1980).
On order, lead time to be confirmed