Scenery
Etched-metal ladder set in N scale. It comprises two leaning ladders of different lengths, a two-section extension ladder with foot bar, a double ladder with rungs on both sides, three stepladders, two of them with a platform and tall grab handle, and a two-step stool with a ribbed platform. The parts are carried on three photo-etched frets in wood brown, silver and black.
In stock: 3 on the shelf, shipped within 1-3 days
Three drinking fountains in N scale. The black fluted column is topped by a pointed capital and carries a small brass-coloured tap; a black basin sits against the column. The white fluted base is elongated with a rounded end.
In stock: 3 on the shelf, shipped within 1-3 days
Basketball hoops in N scale. The light grey post is cranked over towards the backboard; the white board has a black surround and a black target rectangle, and the ring is orange. No net is fitted. The set contains two hoops.
In stock: 3 on the shelf, shipped within 1-3 days
Roll containers in N scale. The mesh panels with rectangular openings close two or three sides depending on the unit; they sit on a slatted base running on four castors. The parts are very finely made and look bare metallic grey, with no top coat visible.
In stock: 3 on the shelf, shipped within 1-3 days
Galvanized steel wheeled containers in N scale. The photograph shows three identical containers in a uniform metallic grey, each on four light-coloured swivel castors. The domed, ribbed lid has a central handle and is shown open on one of the containers; the side wall carries a round loading flap with a handle. The second image is a 3D rendering of the same container.
In stock: 3 on the shelf, shipped within 1-3 days
Green wheeled containers in N scale. The photograph shows three identical containers, green including the lid, each on four black swivel castors. The domed, longitudinally ribbed lid has a central handle and is shown open on one of them; the side wall carries a round loading flap with a handle. The second image is a 3D rendering of the same model.
In stock: 3 on the shelf, shipped within 1-3 days
Silicone mould for tunnel interior wall with recesses. Tunnel interior wall with recesses, for single- and double-track portals with overhead line equipment such as 6304, 6306, 6317; width x height x thickness: 86 x 80 x 18 mm.
In stock: 3 on the shelf, shipped within 1-3 days
The speed camera is equipped with control electronics with 2 switching inputs. The vehicle is recognized via the vehicle detector, item 8441 or via reed contacts. Ideally suited for the CarMotion system. Equipped with one red LED. Height: 3.6 cm
In stock: 3 on the shelf, shipped within 1-3 days
Turnout similar to item 8448, equipped with lateral actuation mechanisms (left, right) for manual operation. Ideal for systems controlled solely through our CarMotion remote control, item 8402, and permanent magnets, item 8431 (without wiring).
In stock: 3 on the shelf, shipped within 1-3 days
Dimensions: L 192 x W 0,1 x H 1,1 cm.
In stock: 3 on the shelf, shipped within 1-3 days
The set consists of 6 fences and 2 gates. L max 90 x W 0.8 x H 2.5 cm / Gate each L 2.5 x H 2.5 cm. Fence each L 15 cm / Wire mesh 100 cm.
In stock: 3 on the shelf, shipped within 1-3 days
This water tower is a typical for local architecture in the Rhine/Rhur area. Solid red bricks in combination with steel elements represents the rough romance of this era and economic history. It fits almost to a maintenance yard, because it does not need much space and it is still an eye-catcher. Dimensions: L 10,2 x W 10,2 x H 25 cm.
In stock: 3 on the shelf, shipped within 1-3 days
Dimensions: L 13 x W 6 x H 6,5 cm.
In stock: 3 on the shelf, shipped within 1-3 days
Ladder set in H0 scale, supplied as photo-etched frets. It comprises leaning ladders in two lengths, A-frame stepladders, step units with a platform and safety hoop, and a low step stool with a ribbed tread; the parts are attached to their frames and are detached for assembly. Finishes range from silver to light brown and dark grey, the long ladders resting on a moulded transverse foot.
In stock: 2 on the shelf, shipped within 1-3 days
Garden barbecue and two picnic tables in H0 scale. The barbecue is white and moulded in one piece: base, arched firebox, lower shelf and a tall chimney pierced at its top; a separate metal grill with two handles sits in the firebox. The two tables are light beige and form a table-and-bench unit built from fine slats.
In stock: 2 on the shelf, shipped within 1-3 days
Six beehives made of stacked orange supers, each capped with a flat silver roof of metallic appearance. The stack height varies from hive to hive and every super carries a moulded oval entrance slot. Coloured accessory for H0 scale.
In stock: 2 on the shelf, shipped within 1-3 days
Lawnmowers in H0 scale. The deck runs on four wheels, a dark grass box is fitted at the rear and a grey engine block sits on top; the handle rises as a loop. The illustration shows two identically shaped mowers, one sea green, one ochre yellow.
In stock: 2 on the shelf, shipped within 1-3 days
Wire mesh fence in H0 scale, supplied as a photo-etched metal fret. The fret carries two long fence runs with a very fine diamond mesh, held by a top and bottom rail and divided into bays by vertical posts. A V-shaped brace is etched into one bay of each run. The parts are cut free from the frame for assembly.
In stock: 2 on the shelf, shipped within 1-3 days
Wire mesh fence topped with barbed wire, in H0 scale. The fine diamond mesh is held by a top and bottom rail and divided into bays by full-height posts; three strands of barbed wire run above it. One bay carries a V-shaped brace. The illustration is a line drawing.
In stock: 2 on the shelf, shipped within 1-3 days
Two Swiss track bells in H0 scale. A cylindrical body is topped by a conical cap carrying a domed cover with a knob, with two fittings facing each other on the sides. The body stands on a ringed shaft ending in a rectangular base plate. The parts come painted matt silver grey.
In stock: 2 on the shelf, shipped within 1-3 days
Six 220 L plastic barrels in H0 scale. The body is bright blue with several ribs around it, the lid is black with a central bung. The barrels are already painted and shown loose.
In stock: 2 on the shelf, shipped within 1-3 days
Six temporary fence panels in H0 scale. The mesh panels have rectangular openings, closer together at the bottom, and each stands on two separate concrete feet with twin slots. The illustration is a 3D rendering in plain white.
In stock: 2 on the shelf, shipped within 1-3 days
Plastic model of the Saurer S4C dropside lorry with tarpaulin in the yellow advertising livery of Cardinal Brewery, by ACE in 1:87 scale, 89 mm long, 15 g, Era III to V. New item in the ACE 1:87 catalogue 2026. The Cardinal brewery in Freiburg has borne its name since 1890, following the appointment of Bishop Mermillod as a cardinal; in 1991, Feldschlösschen took over the Sibra holding, and production in Freiburg was discontinued in 2011. Saurer in Arbon was the leading Swiss manufacturer of medium and heavy goods vehicles from the 1930s onwards.
In stock: 2 on the shelf, shipped within 1-3 days
Model of the MAN eTGE electric delivery van in the yellow colour scheme of the Swiss Post, by ACE in 1:87 scale, plastic, 68 mm long, 10 g, Era VI. The model was created based on the Herpa model 940092 exclusively for the Swiss specialist trade; the exterior mirrors are supplied as separately applied details. The MAN eTGE was introduced in March 2018; its electric motor delivers 100 kW. The Swiss Post operated eleven battery-electric eTGEs from summer 2019 in Ostermundigen, St. Gallen and Geneva, with a range of up to 173 km and a payload of around one tonne.
In stock: 2 on the shelf, shipped within 1-3 days