Scenery
Kit. Prototype data: Tandem roller type BW 170 AD, 4 cylinder Cummins diesel engine 4B 3.3, water-cooled, 53 kW/80 HP, weight 8 t, max. operating weight 9.5 t. L 5.0 x W 2.4 x H 3.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Tandem roller type BW 170 AD, 4 cylinder Cummins diesel engine 4B 3.3 – C, water-cooled, 53 kW/80 HP, weight 8 t, max. operating weight 9.5 t. L 6.5 x W 2.8 x H 3.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: O&K grader 16 – 8 m. Weight approx. 14 t, engine power 140 kW/190 HP. Blade width 4 m. Easy to handle with servo steering and breaks and control valve. The grader is used for earth movement, road construction and maintenance. It stands out for its superior engineering and robustness. Standard and additional attachments ensure suitability for many different applications. L 11.8 x W 3.4 x H 3.3 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Working width 2.5 – 8.5 m. 6 cylinder DEUTZ diesel engine with 82 kW/112 HP. Max. weight 17.9 t. L 7.2 x W 3.0 – 5.0 x H 4.2 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: WIRTGEN road mill W 2200, CATERPILLAR 12 cylinder diesel engine with 597 kW/811 HP, 27000 cm³. Operating weight 46.77 t. L 18.7 x W 3.5 x H 5.2 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Working width 2.5 – 8.5 m, 6 cylinder DEUTZ diesel engine with 82 kW/112 HP. Max. weight 17.9 t. L 7.2 x W 3.0 – 5.0 x H 4.2 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Engine power 752 kW/1025 HP, max. speed 68 km/h, payload 87 t. Dump capacity 53 m³. These big tippers with modern diesel engines, a low-emission model, with permanent four-wheel drive achieve, even in difficult areas, a huge traction and climbing ability as well as an excellent driving stability and therefore short periods of circulation and a high transport volume. L 12.0 x W 6.5 x H 5.8 – 11.5 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. L 5.3 x W 2.1 x H 3.2 cm Level of difficulty: 1 (beginners)
On order, lead time to be confirmed
Can be cut according to required length. Each L 9.0 x W 4.0 cm Level of difficulty: 1 (beginners)
On order, lead time to be confirmed
Kit. Prototype data: 1 cylinder two-stroke engine with hot bulb and slot steering, max. power 26 kW/35 HP for one hour, continuous power 22 kW/30 HP. Manufactured in two-colour injection moulding process. L 10.0 x W 2.3 x H 2.7 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 191 kW/260 HP MAN engine, speed 0.02 – 50 km/h. With the continuously variable gearbox, new performance dimensions are offered. By this technique the field output is increased and the fuel consumption is reduced. The driver is able to use the full power continuously and perfectly adjust the driving speed at all times and under all circumstances. L 10.5 x W 8.2 x H 4.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: FENDT Favorit Vario 926, 191 kW/260 HP, speed 0.02 – 50 km/h. The kit includes 6 trunks. L 8.5 x W 3.0 x H 4.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. MAN 2-axle truck with KÖPF platform for cattle transport and 3-axle trailer. L 22.0 – 24.5 x W 3.0 x H 4.5 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. L 7.0 x W 4.0 x H ca. 5.0 – 8.0 cm Dolly L ca. 5.0 x W 2.7 x H 3.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: The double drum winch 8002 TL of company IGLAND has a pulling power of 2 x 8.0 t and a max. rope capacity of 2 x 107.0 m for a rope diameter of 12.0 mm. With a power requirement of 53 HP per drum the MB TRAC is the correct tractor to drive the winch. As the winch is mounted in the rear linkage only, the tractor can still be used in agriculture. With the shield, which can be mounted to any front loader, the wood can be sorted at the lumberyard. The kit includes 6 trunks. L 8.5 x W 3.0 x H 4.0 – 6.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 1 cylinder two-stroke engine with hot bulb and slot steering, max. power 26 kW/35 HP for one hour, continuous power 22 kW/30 HP. L 5.0 x W 2.2 x H 2.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 276 kW/375 HP engine power, cutting width 6 – 9 m and computerized controls for adjustment and handling make this combine harvester perfect for contractors and large farms. The model CLAAS LEXION 480 is equipped with a 7.5 m wide cutting device and a 10,500 l grain tank. L 13.5 – 22.5 x W 7.0 – 9.0 x H 4.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: 191 kW/260 HP MAN engine, speed 0.02 – 50 km/h. With the continuously variable gearbox, new performance dimensions are offered. By this technique the field output is increased and the fuel consumption is reduced. The driver is able to use the full power continuously and perfectly adjust the driving speed at all times and under all circumstances. L 6.4 x W 3.0 x H 3.7 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. With loading bridge. The kit includes 12 trunks. L 19.5 x W 3.5 – 4.0 x H 5.0 – 12.0 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Prototype data: Telescoping boom 38 m, lattice boom 11.3 m, max. working load 50 t, 6 cylinder diesel engine with 270 kW/367 HP, max. speed 85 km/ h, total ballast 9 t. Dimensions driving position: L 14 x W 3.5 x H 4.5 cm. Extended: L 12 x W 7.5 x H 43 cm. Level of difficulty: 2 (advanced).
On order, lead time to be confirmed
Kit. Dimensions hotel: L 16.4 x W 15.5 x H 17.5 cm. Gate: L 10.2 x W 8.5 x H 20.8 cm. Level of difficulty: 2 (advanced).
On order, lead time to be confirmed
Kit. L 9.5 x W 2.8 x H 3.3 cm / L 7.8 x W 2.8 x H 3.3 cm 2x L 7.8 x W 2.6 x H 2.8 cm Level of difficulty: 2 (advanced)
On order, lead time to be confirmed
Kit. Protoype data: 5-axle, max. lifting capacity 160 t. Lifting height with folding top 96 m, max. range with folding top 74 m. This mobile crane stands out due to several performance profiles, which make it the market leader of its class. Powered by a 400 kW/554 HP strong LIEBHERR turbo diesel engine. As a result, the crane became compact, agile and weight-optimized. Driving position L 17.5 x W 3.7 x H 4.6 cm Extended L 15.8 x W 14.5 x H 41.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed
Kit. With swing-away KNAACK. Driving position L 24.0 x W 3.8 x H 4.6 cm Extended L 15.5 x W 14.0 x H 43.0 cm Level of difficulty: 3 (professionals)
On order, lead time to be confirmed