Scenery
Timepiece without function. Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 2,5 cm.
In stock: 1 on the shelf, shipped within 1-3 days
This flashing light simulates in a deceptively real-looking way the function and the motion of a real rotating flashing light. A retrofit for emergency vehicles of all kinds. Maintenance free by LED lighting.
In stock: 1 on the shelf, shipped within 1-3 days
Basic starter set for the Viessmann CarMotion system in H0 gauge (1:87). Included in delivery 1 Mercedes-Benz ACTROS dump truck with rotating beacons, with rechargeable battery 1 charger with USB charging cable (Art. 8400) 12 permanent magnets 1 magnetic pen The vehicle follows a magnetic strip under the roadway. Magnetic strip (Art. 8430) and programming device (Art. 8401) are not included. Era V.
In stock: 1 on the shelf, shipped within 1-3 days
CarMotion basic starter set consisting of item 8018, H0 MAGIRUS DEUTZ 3-axle dump truck (basic), 1 charger with USB charging cable, item 8400, 12 permanent magnets, item 8431 and 1 magnetic bar. Suitable retrofit kit Sound: item 8450
In stock: 1 on the shelf, shipped within 1-3 days
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control L 8.2 x W 3.5 x H 3.7 cm
In stock: 1 on the shelf, shipped within 1-3 days
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: MEILLER loading crane MK 125 RS, max. jib length 6 m, max. payload 5.3 t. L 8 x W 3.5 x H 4.3 – 10.3 cm
In stock: 1 on the shelf, shipped within 1-3 days
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor, Wackenhut tanker semitrailer STA 22, capacity 37,200 l. Suitable retrofit kit Sound: item 8453 L 17.5 x W 3.3 x H 3.3 – 3.9 cm
In stock: 1 on the shelf, shipped within 1-3 days
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor, gross combination weight 32 t, payload 20 t, SCHENK charcoal vessel SA 16/93. Suitable retrofit kit Sound: Item 8453 L 15.8 x W 3.3 x H 3.3 – 4.5 cm
In stock: 1 on the shelf, shipped within 1-3 days
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: Magirus Deutz 200 D 16 S, 161 kW / 220 HP, engine type F8L 714. Suitable retrofit kit Sound: item 8452 L 7.5 x W 3.2 x H 2.9 cm
In stock: 1 on the shelf, shipped within 1-3 days
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: Mercedes-Benz 1624, 6-cylinder inline engine OM 355, 177 kW / 240 HP. Suitable retrofit kit Sound: item 8454 L 8.2 x W 3.3 x H 3.3 – 4.8 cm
In stock: 1 on the shelf, shipped within 1-3 days
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 8.2 x W 2.9 x H 3.2 - 6.4 cm
In stock: 1 on the shelf, shipped within 1-3 days
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 8.5 x W 2.9 x H 4.2 cm
In stock: 1 on the shelf, shipped within 1-3 days
The charger for the trucks and buses of the Viessmann CarMotion system can be powered by any commercially available USB power supply unit or by almost any device such as PC, laptop, power bank etc. With the enclosed cable, the charger can be connected to a USB-A power supply. The charger’s plug just needs to be inserted into the socket underneath the CarMotion vehicle. An empty battery is recharged within 35 minutes. A partially discharged battery requires correspondingly less time to be recharged. The current charging status of the vehicle during the charging process is indicated by the interior lighting of the vehicle flashing in 4 steps.
In stock: 1 on the shelf, shipped within 1-3 days
With the programming device you can make various settings as well as software updates on your CarMotion trucks and buses. With an USB cable it is connected to the charging socket of the vehicle and to the USB-A socket of a computer or a hub, adapter or other. The user-friendly operating software communicates with the vehicle, provides information about the charging status, the distance travelled etc. Furthermore, it enables comfortable setting of various vehicle parameters such as speed, active functions, light brightness and many more. In particular, it is used for setting the desired reactions of the vehicles to the commands that can be triggered by the magnet arrangement in the roadway. Moreover, it is easy to copy configurations between vehicles.
In stock: 1 on the shelf, shipped within 1-3 days
The remote control facilitates the control of the CarMotion vehicles on the layout as well as a simple configuration of the vehicle. For this purpose the remote control is directed towards the front part of the vehicle where its infrared sensors are located. Distances larger than 50 cm require a very precise alignment of the remote control with the vehicle. Under favourable conditions a distance of up to 1 m is possible. The device is designed for a local control of the vehicles – driving on sight, so to speak. It can be used to start a vehicle – even from an active stop coil – and to stop it at any time. Furthermore, it is possible to set the vehicle speed and other vehicle functions such as lighting, blinking lights etc. For these basic configurations, it is not necessary to connect the vehicle to the programming device. Moreover, the remote control complements the vehicle control via the magnet arrangement underneath the roadway – thus the user can carry out complex operations and has further options to intervene.
In stock: 1 on the shelf, shipped within 1-3 days
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer. Contents: 6 rubber wheels, 6 rims, 3 steel axles, 6 sockets. Suitable for trailer and semitrailer with up to 3 axles and single tyres.
In stock: 1 on the shelf, shipped within 1-3 days
With this set you can retrofit your kibri trailers or semitrailers to optimize the running smoothness and the tracking accuracy of the vehicle. This will improve the driving characteristics of the trailer resp. the semitrailer. Contents: 8 rubber wheels, 4 rims, 2 steel axles, 4 sockets. Suitable for 2-axle trailer and semitrailer with twin tyres.
In stock: 1 on the shelf, shipped within 1-3 days
With this kit you can equip your CarMotion trucks in the event that the original tyres are damaged or worn out. The tyres are characterized by good traction, smooth running and tracking stability, making them suitable for use on trailers as well.
In stock: 1 on the shelf, shipped within 1-3 days
Weight for CarMotion MB Actros vehicles with M cab. Retrofitting ahead of the front axle. The weight increases the front axle’s downforce on the road, enabling the maneuvering of trailers through tighter radii.
In stock: 1 on the shelf, shipped within 1-3 days
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.
In stock: 1 on the shelf, shipped within 1-3 days
Foil for displaying magnetic fields. Suitable for, among other things, detecting the magnetic tape, item 8430 and the permanent magnets, item 8431, beneath road surfaces. Please do not fold the foil!
In stock: 1 on the shelf, shipped within 1-3 days
Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8013, 8021, 8051, 8054, 8055, 8061, 8065, 8071, 8130, 8132, 8133. L 18 x W 8.8 x H 11.4 mm
In stock: 1 on the shelf, shipped within 1-3 days
Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module. Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz. Suitable vehicles: 8003, 8016, 8020, 8036, 8152, 8155, 8161. L 22.5 x W 11.2 x H 9.3 mm
In stock: 1 on the shelf, shipped within 1-3 days
On December 24, 1818 it was the first time that Franz Xaver Gruber, organist and village school teacher, and Joseph Mohr, priest in the Church St. Nikolaus in Oberndorf near Salzburg, performed this famous song. Turn of the century the Church St. Nikolaus was demolished and the Silent Night Memorial Chapel was built. The original Silent Night Memorial Chapel, a Vollmer kit in gauge 1:87, is equipped with extra parts such as an LED for interior lighting and artificial snow. Dimensions: L 11 x W 8 x H 16 cm.
In stock: 1 on the shelf, shipped within 1-3 days