Scenery
Handrail, model 2, in H0 scale, as a brass-coloured etched fret. It is a plain bar railing with closely spaced vertical infill bars between the handrail and the bottom rail, a mid-height intermediate rail and posts at regular intervals. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 3, in H0 scale, as a brass-coloured etched fret. The railing is divided into square bays, each filled with finely perforated sheet in a regular dot pattern. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 4, in H0 scale, as a brass-coloured etched fret. Vertical bars fill the space between handrail and bottom rail without an intermediate rail; the posts extend downwards for mounting. The bar spacing is closer than on model 2. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 5, in H0 scale, as a brass-coloured etched fret. Upright oval balusters run below the handrail, above a continuous band of small rings. Heavier posts divide the railing into regular bays. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 6, in H0 scale, as a brass-coloured etched fret. Rectangular bays with St Andrew's cross bracing run between the top and bottom rails; each bay is bounded by a vertical post and split at mid-span by a short strut. The parts are supplied unpainted.
On order, lead time to be confirmed
Handrail, model 7, in H0 scale, as a brass-coloured etched fret. The infill consists of closely stacked horizontal rails between slim posts, closed at the top by a heavier handrail; there are no vertical bars. The parts are supplied unpainted.
On order, lead time to be confirmed
Fence, model 1, in H0 scale, as a brass-coloured etched fret. Closely spaced vertical pickets with pointed heads project above the top rail; heavier posts divide the fence into regular bays. A separate rail is included as an extra part on the fret. The parts are supplied unpainted.
On order, lead time to be confirmed
Fence, model 2, in H0 scale, as a brass-coloured etched fret. The vertical pickets taper to a point and are crossed at mid-height by a continuous band of rings; a second band of rings runs above it. The parts are supplied unpainted.
On order, lead time to be confirmed
Model 8 handrail in H0 scale, supplied as a photo-etched brass fret. The panels repeat a rectangular frame with diagonal bracing and a central circle, separated by posts with rounded heads. The strips are unpainted and still attached to the fret.
On order, lead time to be confirmed
Model 9 handrail in H0 scale, in photo-etched brass. Each strip combines a top rail with horizontal bars, divided by vertical posts, with closer bar spacing at the ends. The brass is unpainted and still attached to the fret.
On order, lead time to be confirmed
Set of bollards in H0 scale, given as 18 pieces by the manufacturer. The bollards are black, shaped as a short cylinder with a collar at the base and a slightly flared top. The illustration is a 3D rendering showing three bollards on a paved surface.
On order, lead time to be confirmed
Set of short bollards in H0 scale, given as 22 pieces by the manufacturer. The bollards are black, with a widened base, a waisted shaft and a rounded head. The illustration is a 3D rendering showing three bollards on a paved surface.
On order, lead time to be confirmed
Set of ball bollards in H0 scale, given as 14 pieces by the manufacturer. The bollards are black, shaped as a solid sphere resting on the ground, with no visible shaft. The illustration is a 3D rendering showing three balls on a paved surface.
On order, lead time to be confirmed
Temporary site fencing in H0 scale. The panel reproduces a close-mesh welded grid within a tubular frame, in light beige. It stands in two dark plastic feet with broad soles. A single element is shown.
On order, lead time to be confirmed
Hanging litter bins in H0 scale, given as 10 pieces by the manufacturer, in orange. The box-shaped body has a domed lid with a wide rectangular opening. Two mounting lugs are moulded on the back for hanging installation.
On order, lead time to be confirmed
Hanging litter bins in H0 scale, given as 10 pieces by the manufacturer, in matt olive green. The box-shaped body carries a domed lid with a rectangular opening. Two mounting lugs are moulded on the back for hanging installation.
On order, lead time to be confirmed
Four "Correos" post boxes in H0 scale, from 1980 onwards according to the manufacturer. The yellow cylindrical box stands on a plinth and has a domed cap and a posting slot on the front. The printed livery shows two red bands and a red post horn.
On order, lead time to be confirmed
Four "Correos" post boxes in H0 scale, from 2000 onwards according to the manufacturer. The yellow cylindrical box with its domed cap carries the posting slot on the front. The printed livery consists of the blue "CORREOS" lettering and the blue post horn, without red bands.
On order, lead time to be confirmed
100 kW electric generator in H0 scale. The red housing sits on a dark grey base frame with moulded feet. Wide ventilation louvres are set in the end face, and a fine grille sits next to a rectangular hinged access panel on the long side.
On order, lead time to be confirmed
Six RENFE ASFA balises in H0 scale. The balise is a low rectangular box with a ribbed top and side fixing lugs, supplied painted black. In the photo the balises rest on brown sleeper-like elements.
On order, lead time to be confirmed
Six RENFE track convergence markers in H0 scale. The markers are white, with an elongated body and a bevelled tip, and carry three black transverse bands. They come on the sprue and are cut free before fitting.
On order, lead time to be confirmed
RENFE unified buffer stop in H0 scale. The solid body has a vertical face towards the track and runs back into a long ramp. A brown grained timber beam is set against the face, with two black square-section buffer heads projecting from it on their rams. The model comes painted and assembled.
On order, lead time to be confirmed
Modern RENFE buffer stop in H0 scale. The concrete-look body shows vertical shuttering joints and a scatter of tie holes, and the track face is recessed with two rectangular niches either side of a central web. At the rear it runs out into a trough-shaped ramp flanked by two raised beams. A brown timber beam across the face carries two black buffer heads on their rams.
On order, lead time to be confirmed
Modern RENFE buffer stop in H0 scale with a red beam. The concrete-look body has shuttering joints, fine tie holes and two rectangular niches on the track side, and ends at the rear in a trough-shaped ramp. The beam is painted red with white diagonal chevrons and carries two black buffer heads on their rams.
On order, lead time to be confirmed