Buildings
« The mill clatters... » Kit of a water mill with waterwheel based on a prototype in the Black Forest. Building facade in stone look and made of real wood.
On order, lead time to be confirmed
Kit of a small farmhouse from the Franconia region with half-timbering, doors and window frames made of real wood. The gates are hung on filigree hinges and can be opened.
On order, lead time to be confirmed
The prototype of this modern building is an extension to Bad Bentheim station in Lower Saxony and originally housed the station restaurant.
On order, lead time to be confirmed
This building is versatile and can be used as a workshop or for craft and industrial enterprises. Classic construction with a gable roof and house walls in a slightly weathered plaster look. Doors, windows and both gates (gate opening each 25 x 29 mm) made of real wood, already fully coloured. With filigree plastic rain gutters and downpipes. Can be lit with Busch LEDs 5998. Kit.
On order, lead time to be confirmed
Large vehicle hall with a separate administrative building. Universally usable as a TÜV/DEKRA or THW hall, fire engine house, bus depot, and much more. Three large entrances (49 x 50 mm). Continuous rows of windows on two sides of the building. Three glazed roof lights. Two-storey administrative building with side entrances and a flat roof.
On order, lead time to be confirmed
Modern workshop building that can be added as a perfect extension to the Busch vehicle hall 1966 due to the same architectural style.
On order, lead time to be confirmed
This coaling crane is a typical model in terms of its design, used in this or a very similar form in major railway maintenance depots. Coaling cranes of this type are still in operation at many heritage railways today. The coaling crane model is therefore universally applicable. It consists of a masonry base with a side staircase leading to a platform made of real wood. The crane operator’s cab is constructed in octagonal wooden design and is rotatable through 360 degrees.
On order, lead time to be confirmed
Kit of two coal silos for coal handling and industrial areas, based on a rural prototype in the Saxon town of Aue. Realistically weathered representation of the metal construction in a rust look. Post-and-beam construction with filigree supports, hoppers and discharge points. A larger layout can be created using several of these coal bunkers.
On order, lead time to be confirmed
This building is based on a prototype from the Häuselloh quarry in the Fichtelgebirge (www.enklselb.com), where large stone blocks were « sawn up », i.e. cut into stone slabs for further processing. Inside is a replica of the gang saw with its large circular blade. The taller main building has brick masonry, while the lower extension has plaster that has partially already fallen off. With a wooden lean-to extension to the main building.
On order, lead time to be confirmed
Kit for an authentic factory building from the Jugendstil era. The model is based on the «Kammerl» power station in Upper Bavaria, which, after renovation, now shines again with its originally used red brickwork. The facade features detailed workmanship on all sides of the building. The semicircular window arches are just as typical of the architecture of that time as the classic divided-light windows with filigree wooden frames and the large wooden gates (all real wood).
On order, lead time to be confirmed
Provisional vaccination or testing centre consisting of three containers. With barrier fences (total length over 180 mm), poster holders in various sizes and matching lettering. With security officer and standing table for entry control. Kit.
On order, lead time to be confirmed
Kit for the stabling of an agricultural production cooperative (LPG), as used in the GDR from the 1960s onwards. The original building served for rearing heifers (a heifer is a female domestic cattle animal that has not yet calved). The building model, made from special cardboard, is manufactured using the latest laser-cut technology and is painted in concrete colour.
On order, lead time to be confirmed
Kit for the workshop of an agricultural production cooperative (LPG), as used in the GDR from the 1960s onwards. The building model, made from special card, is manufactured using the latest laser-cut technology and is painted in a concrete colour. The numerous accessory parts, such as rainwater gutters, downpipes, and window frames, consist of delicate plastic injection-moulded components.
On order, lead time to be confirmed
Model of an LPG storage hall for weather-protected storage of hay, straw, fodder and machinery. The concrete construction style of LPG buildings is authentically reproduced in this kit using specially treated coloured card. Large sliding gates (opening: 26 x 24 mm) made of real wood on three sides of the building, mountable in either closed or open position.
On order, lead time to be confirmed
This shelter, designed to protect agricultural vehicles and equipment, was widely used in LPGs (Agricultural Production Cooperatives of the GDR) as well as on West German farms. Today, these versatile shelters are still used for agricultural vehicles or as material stores for construction companies, as weather protection for municipal highway department fleets, and for many other purposes. Real-wood model. Kit.
On order, lead time to be confirmed
Backyard building in traditional brick and half-timbered construction. Half-timbering, door and gate made of real wood. Already fully coloured. Realistic roof tiling. Universally applicable, e.g. as a workshop, garage, laundry, for railway depots and coaling plants, etc. Kit.
On order, lead time to be confirmed
Kit for the stabling of an agricultural production cooperative (LPG), as used in the GDR from the 1960s onwards. The original building was used for rearing heifers (a heifer is a female domestic cattle animal that has not yet calved). The building model, made of special cardboard, is manufactured using the latest laser-cut technology and is painted concrete grey.
On order, lead time to be confirmed
Kit for the workshop of a agricultural production cooperative (LPG), as used in the GDR from the 1960s onwards. The building model, made from special card, is manufactured using the latest laser-cut technology and is painted in a concrete colour. The numerous retrofit parts, such as rainwater gutters, downpipes and window frames, consist of delicate plastic injection-moulded parts.
On order, lead time to be confirmed
Kit. Classic garden shed in mixed construction with real wood elements such as roof ridge, terrace railing, shutters and door. With corrugated roof. Prototype: GDR bungalow GL 14. H0 size: 44 x 36 mm, 28 mm high. Assembling Busch building models is particularly easy thanks to a sturdy, plug-together substructure that is clad with the ready-cut and coloured individual parts. In addition, only a hobby knife and model-making glue (e.g. Busch 7592 or 7599) or all-purpose adhesive (e.g. UHU® Kraft) are required. Holiday camp "Goldene Ähre" Near Buschheide lies the village of Sonnental. There is a large holiday camp here. It offers the employees of the neighbouring agricultural production cooperative (LPG) "Goldene Ähre" well-deserved rest from the socialist working day. People live in the typical bungalows, which are also gladly used in private gardens. Simpler accommodation is provided by the camp's hut. The day at the holiday camp begins on the parade ground with flagpoles and memorial and continues with sport, games and fun in the leisure area. Meals are taken in the authentically reproduced dining hall, which can alternatively also be used for evening events. The matching H0 model vehicles from the "Goldene Ähre" series complete the scene perfectly.
On order, lead time to be confirmed
The passage of time has left its mark on this old barn. A real wood kit with weathered wooden slats for the walls, a collapsed roof and various scrap items for the interior detailing, such as an old tractor.
On order, lead time to be confirmed
Fuel station for agricultural vehicles in LPGs and other agricultural or industrial enterprises. The wooden structure of the large prototype is also made of real wood in the model. The roof and walls, originally made of corrugated iron, are reproduced in this kit using microwave carton with a realistic appearance. Includes diesel tank and pump columns inside.
On order, lead time to be confirmed
The construction of the HS 091 high silo from concrete blocks is perfectly represented in this kit. The "outer skin" of this silo model consists of a special carrier material that has been printed from an original prototype and then laminated with a special film. This gives the surface a prototypically matt-rough texture and a very special feel. As in the original, the surrounding framework of round steel bars is varied in design along the height of the silo.
On order, lead time to be confirmed
A decommissioned goods wagon repurposed as a shed for gardens, backyards, harbour scenes, railway sites, railway museums, etc. As in the original, the wall cladding of this kit is made from real wood. All parts are pre-coloured.
On order, lead time to be confirmed
Kit of two coal silos for coal-handling facilities and industrial areas, based on a rural prototype in the Saxon town of Aue. Realistically weathered depiction of the metal construction in a rust look. Post-and-beam construction with filigree supports, hoppers and discharge chutes. Several of these coal bunkers can be combined to create a larger layout.
On order, lead time to be confirmed