Buildings
The spacious locomotive shed in a modern design with bright red accents offers enough space for two electric locomotives. Both vehicles easily find their place in the double-track building. The shed can also be used as a workshop or maintenance shed. This makes any care and maintenance of the electric locomotives child's play for the miniature railway staff. Suitable for locomotives with a gauge of up to 300 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Signal tower with brick round arches and a gable roof based on the former Stw 1, Freilassing. Matches the other models of the Freilassing series: »Freilassing« Roundhouse, Art. 120081, »Freilassing« Wagon shed, Art. 120082 and »Freilassing« Rail depot administration, Art. 120083.
In stock: 1 on the shelf, shipped within 1-3 days
Goods shed of timber construction with masonry foundation and large roof projection protecting the working area of the loading platform against meteorological conditions. Four large sliding gates and a flight of stairs make access to the shed possible.
In stock: 1 on the shelf, shipped within 1-3 days
2 Inspection pits, each 172 mm long, with rails moulded on (same as base plate of art. 120149).
In stock: 1 on the shelf, shipped within 1-3 days
These delicate swivel water spouts with rotary upper parts feature an external heating system. 2 gully grates are also included.
In stock: 1 on the shelf, shipped within 1-3 days
Faithful reproduction of a filigree steel structure, with vertical storage container. To build interesting combinations with another sanding tower, a bridge gangway is part of the kit (as 120146).
In stock: 1 on the shelf, shipped within 1-3 days
The petrol station with 2 fuel tanks is intended for model layouts on which diesel locomotives also run.
In stock: 1 on the shelf, shipped within 1-3 days
Goods depot as it can be found in the country with wooden lagging, loading rack and canopy.
In stock: 1 on the shelf, shipped within 1-3 days
The filigree oil spout with jib and operator’s stand is used, in this service area, to tank up diesel engines and steam engines powered by diesel fuel. The facility consists of 2 flat-bottom diesel tanks and an upright fuel oil tank. Several tanks can be juxtaposed by using the stairs, catwalk and railings included.
In stock: 1 on the shelf, shipped within 1-3 days
Engine house with 2 shelters for locomotives up to 190 mm length over buffer. The gates can be opened and closed manually.
In stock: 1 on the shelf, shipped within 1-3 days
Level-crossing with gatekeeper’s house, for all straight and curved model tracks.
In stock: 1 on the shelf, shipped within 1-3 days
The package contains various billboards, timetables, benches, waste baskets, clocks and train target indicators. To go with the covered platform (art. 120199).
In stock: 1 on the shelf, shipped within 1-3 days
Modern standard railway service station with oil tank, pump, switchgear, floor section and service building. For versatile use on railway premises.
In stock: 1 on the shelf, shipped within 1-3 days
Laser-cut model of a single coal stage with coal bunker and loading platform to supplement supplies on small and secondary railways. Coal is tipped by hand into the tender using willow baskets over the ladders. The coal is included as part of the kit’s accessories.
In stock: 1 on the shelf, shipped within 1-3 days
A laser-cut model of a steam slewing crane based on a historical prototype for shunting and handling goods wagons. Versatile for use on railway layouts in locomotive depots or for break-bulk operations in industrial or seaport scenes.
In stock: 1 on the shelf, shipped within 1-3 days
Modern stations in glass optic with destination display, ticket counter, information boards, platform lights (without function), as well as a flexible platform edge.
In stock: 1 on the shelf, shipped within 1-3 days
The model depicts the process of cleaning out a steam locomotive, where combustion residues are directly shovelled into a tub in the ash pit. The container is then hoisted up by an inclined lift, tipped, and emptied into a waiting slag wagon.
In stock: 1 on the shelf, shipped within 1-3 days
Store building for humus and peat. Timber-framed construction with movable gates and natural stone foundation. Ideal also for building next to the track.
In stock: 1 on the shelf, shipped within 1-3 days
Small turntable with a branch angle up to 37.5 degrees for saving space when using locomotives for example in narrow end stations. The combination of plastic and natural material brings together mechanical precision with an appealing look: The track pieces and platform for hand operation are made from real wood. Rail sections with a length of 171.5 mm as well as a powerful servo are included with the track switch. Connection is through servo control, item 180725. Also suitable for Märklin neutral conductors.
In stock: 1 on the shelf, shipped within 1-3 days
Three-platform, expandable engine shed with 7.5 degree partitioning with ridge turrets and large side and rear windows for the locomotives in your collection with up to 290 mm overall length. Servo drive components for all gates, as well as numerous accessories such as spindle lifting jacks, engineer waiting shelter and transformer station are included in the kit.
In stock: 1 on the shelf, shipped within 1-3 days
For your small engine shed. Coaling station with half-timbered coal bunkers, swivelling crane cabin with barrel roof, minecart, water spout and loading gauge. Bulk coal is provided for decoration.
In stock: 1 on the shelf, shipped within 1-3 days
Floor model of a white, rail-mounted gantry crane with hoist and trolley for vertical and horizontal lifting operations with heavy loads, e.g. for the assembly of tunnel boring machines on tunnel construction sites. Generic depiction with imprint of the »HERRENKNECHT« lettering. Track profiles enclosed. Model not functional.
In stock: 1 on the shelf, shipped within 1-3 days
Comprehensive model set for railway depot detailing, consisting of: a cinder disposal plant with pit and inclined lift, a compressor house with interior details, and a sand house with a sliding barrel roof, both buildings in brick construction, a steel sand tower with elevated tank, a pipe-blowing frame, a poker rack with hand tools, a shed with canopy, a water crane with pivoting jib arm, heating system, and gully grates.
In stock: 1 on the shelf, shipped within 1-3 days
For our 2026 anniversary model, we are bringing industrial history to life! We took our inspiration from the Meiderich steelworks in Duisburg, founded by August Thyssen at the beginning of the 20th century. Pig iron was produced there for decades - until the last of five blast furnaces went out in 1985. The model recreates the plant's legendary blast furnace 2 and brings the coal and steel industry into the model world. A technically and historically fascinating theme that deliberately goes far beyond our regular new products to mark our 80th anniversary. At the same time, we are building a bridge to another historical milestone: 75 years of the European Coal and Steel Community. The European Coal and Steel Community, the nucleus of today's EU, once opened up duty-free access to coal and steel - and thus paved the way for economic unification and lasting peace in Europe. A model with history, vision and weight - for collectors, history and technology enthusiasts and anyone looking for a challenge! The model includes the blast furnace with revolving frame, the inclined lift with winch house, a dust collector, the Y-pipe with associated pipes, a gas flare, the casting hall with gantry crane and a small day bunker.
In stock: 1 on the shelf, shipped within 1-3 days