New items 2027 · Roco
Diesel locomotive 218 308 of the Deutsche Bundesbahn. In oxide red livery Locomotive fronts with different DB logo variants Exact reproduction of the roof design Separately applied parts, some of them etched In digital operation with switchable headlight/tail light, driver's cab and engine room illumination The 218 308 belongs to the third production series of the Class 218. It was built by the company Krupp in Essen and accepted and registered on 12 September 1974 at the Bundesbahn repair depot in Bremen. Its first assigned depot was Regensburg, where it was based until 23 September 1983. From 24 September 1983 to 4 November 2000, it was based at the Mühldorf depot, a period the model also depicts. A distinctive feature of the 218 308 was that it remained in service for a very long time in the purple-red livery (RAL 3004), even during the DB AG era after 1994, until December 1998. It also features a Voith ventilation system with its characteristic sound. Another notable feature was that, until 1994, the old Bundesbahn logo (without a border) was still displayed on the front of cab No. 2, and only disappeared with the introduction of the new red DB AG logos in 1994.
Pre-order, release expected in Q1 2027
Diesel locomotive 217 017 of the Deutsche Bahn. Mould variant! Variant with Voith cooling system Version in traffic-red livery Locomotive front end without a 1,000-volt heating cable Plug-in parts applied separately, some of them etched In digital mode with switchable headlight/tail light and driver's cab and engine room illumination Diesel locomotive 217 017 belonged to the small Class 217 of the Deutsche Bundesbahn, with just 15 locomotives. Built by Krupp in 1968, the locomotive was part of the V-160 family and originally featured, in addition to the traction diesel motor, a separate heating diesel engine for supplying passenger trains. This made it versatile for both passenger and freight traffic. 217 017 was based in Regensburg for many years and was transferred to the Mühldorf depot in 2000. There, the locomotive – which had by then been repainted in traffic red – was used primarily for freight traffic. In 2008, it underwent a simplified major overhaul. During this overhaul, the heating diesel motor, which was no longer required, was removed and replaced with ballast. As one of the last remaining locomotives of its class, 217 017 remained in service with DB Schenker Rail until the end of 2011 and was the last operational 217 in the Deutsche Bahn fleet. In February 2014, it was finally withdrawn from service and sold to the Pfalzbahn.
Pre-order, release expected in Q4 2027
Diesel locomotive 2143.34 of the Austrian Federal Railways. Mould variant! Version from the 3rd production series with a straight frame In blood-orange livery with a silver roof and wing-wheel Free-standing grab rails, some made of metal In digital mode with switchable high beam, headlight/tail light and driver's cab lighting With new, comprehensive sound The Class 2143 locomotives were built between 1964 and 1977 and operated on non-electrified main and branch lines, particularly in eastern Austria. They hauled both passenger and goods trains. A total of 77 locomotives were delivered to the ÖBB by Simmering-Graz-Pauker-Werke. A large proportion of the Class 2143 fleet comprised the third production series, which was itself subdivided within this class. The so-called Series 3a comprised running numbers 2143.34–43, whilst Series 3b comprised 2143.44–70. All locomotives in the third series share certain common features: the frame is straight, unlike in the earlier series, and is not cranked downwards. The areas around the driver’s cab doors featured long rain gutters, and the door windows were framed in metal. The fuel filler areas were also designed with different dimensions.
Pre-order, release expected in Q3 2027
Diesel locomotive 223 101 of Salzburger Eisenbahn Transport Logistik (SETG). Attached exterior mirrors for folded and unfolded positions Separately applied grab rails, windscreen wipers and UIC sockets Colour-contrasting brake discs In digital operation with switchable high beam and switchable headlight/tail light Salzburger Eisenbahn Transport Logistik took over the Eurorunner diesel locomotives of OHE Cargo in September 2016 following the cessation of its operations. No. 223 101 has been part of the company’s fleet in the green-and-white SETG livery since March 2017.
Pre-order, release expected in Q1 2027
Diesel locomotive 2143 077 of RTS Rail Transport Services GmbH. Version from the 3rd production series with a straight frame In service with track engineering trains Free-standing grab rails, some made of metal In digital operation with switchable high beam, headlight/tail light and driver's cab lighting With authentic, rich sound Railway construction in Austria RTS Swietelsky is active in modern railway construction and carries out projects relating to the new build, renewal and maintenance of track systems. With specialist staff and high-performance railway construction technology, the company ensures a safe, efficient and reliable rail infrastructure and operates throughout Austria. Note: The model is based on the existing 2143 series; no further changes will be made. It is a model that should nevertheless not be missing from any collection of modern construction trains.
Pre-order, release expected in Q1 2027
Diesel locomotive 223 011 of Beacon Rail. Model in current design Attached exterior mirrors for folded and unfolded positions Separately applied grab rails, windscreen wipers and UIC sockets Colour-contrasting brake discs In digital operation with switchable high beam and switchable headlight/tail light The ER 20 series is part of Siemens’ tried-and-tested Eurorunner family and exemplifies powerful, reliable traction in modern rail transport. Equipped with a powerful diesel engine and modern three-phase technology, the ER 20 delivers around 2,000 kW of output and is designed for a top speed of up to 140 km/h. This makes it suitable for both high-speed regional services and demanding freight operations on non-electrified lines. The 223 011-8/ER 20-011 was delivered to Siemens Dispolok in 2006 and incorporated into the leasing pool. In the following years, it was deployed by various railway operators. In 2015, the locomotive became the property of Beacon Rail and has since been used flexibly in leasing operations by various railway undertakings.
Pre-order, release expected in Q2 2027
Railway slewing crane of RTS Rail Transport Services GmbH with real operating functions – digitally controlled. Edition model! Functions: Self-propelled model Free-wheeling operation in train formation is possible Crane superstructure with boom can be rotated 360° Boom can be raised and lowered Telescopic boom can be extended and retracted Crane hook can be raised and lowered via a multi-sheave pulley Crane operator's cab with switchable exterior lighting Switchable work lamp on telescopic boom Digital onboard decoder and switchable light and sound functions Movable outriggers Barrier wagon with bearing block, counterweight and support pedestals Control via Z21 multiMAUS or Z21 WLANMAUS Specially adapted crane control in the Z21 app Control via PS4 controller Fully functional model of a 6-axle railway slewing crane with a movable telescopic boom. The crane can operate independently or, after manually unlocking the gear coupling, run in a train formation. The upper structure can rotate 360° without stopping. All turning and lifting movements feature a soft start and stop. This makes it simple and fun to lift bridges, lay switches, and manage track panels. The horizontally positioned boom is suitable for working beneath catenaries. The telescopic boom can be luffed and telescoped in any working position, even with a load on the crane hook.
Pre-order, release expected in Q2 2027
Diesel locomotive 2067 105 of the Austrian Federal Railways. Version in the Valousek design Hood with accurately reproduced pull-out hood Finely detailed model with many separately applied plug-in parts Switchable shunting light in digital mode The ÖBB 2067 105 belongs to the tried-and-tested 2067 series of diesel locomotives, which were developed by SGP from 1959 onwards for heavy shunting duties. With its 600-HP diesel engine, distinctive rod drive and robust construction, it was in service for decades at stations throughout Austria. The locomotive features the characteristic Valousek design with a ‘bib’ on the ends, which was introduced on many ÖBB shunting locomotives from the 1990s onwards and made them easier to recognise. The 2067 105 was built in 1977 by SGP-Vienna with the factory number 18530 and delivered to the ÖBB.
Pre-order, release expected in Q2 2027
Diesel locomotive 232 446 of Schienen Güter Logistik GmbH. Powerful, reliable model for authentic long trains In digital mode with switchable shunting light and switchable headlight/tail light SGL – Schienen Güter Logistik GmbH is a specialist provider of rail freight transport and railway construction logistics, based in Dachau. The company is responsible for planning and executing transport operations, as well as all rail-based construction-site logistics. Among other things, it operates powerful Class 232 diesel locomotives, which are particularly suited to heavy freight trains and flexible deployment in construction traffic.
Pre-order, release expected in Q2 2027
Diesel locomotive 754 077 of the Czech State Railways. Version in its current operational condition; a special vehicle in the CD fleet Finely detailed model with many separately applied plug-in parts With supplied sign set In digital mode with light functions based on the CD prototype model The so-called "diving goggles" or "spectacles" locomotive was developed and built by CKD in Prague. The T 478.4, a further development of the T 478.3, was fitted with a more powerful engine and an electric train-heating system. In 1988, the 86 locomotives were assigned the new series designation 754
Pre-order, release expected in Q4 2027
Diesel locomotive 106 094 of the Deutsche Reichsbahn. Era IV version in dark red livery With rain canopies over the side windows Frost protection covers for the ventilation grilles, mountable open or closed Die-cast zinc engine bonnets, providing greater weight and high tractive effort. In digital operation with switchable shunting light, dipped headlight, headlight/tail light, and driver's cab lighting Based at Rbd Greifswald and Bw Pasewalk During the development of the Class V 60 shunting locomotive of the Deutsche Reichsbahn (Ost), testing of the first two prototype locomotives began in 1959. Before series production could begin, a number of design changes were required and were tested in a further small series of five locomotives. Between 1962 and 1964, the first series of 163 locomotives was delivered to the DR by LKM Babelsberg. Whilst the first main series was still under construction, a rain canopy was fitted above the side windows. The front ends of the locomotive hoods were also slightly modified. Unlike the first locomotives, whose hoods had slightly curved front ends around a vertical axis, resulting in protruding lamps mounted on brackets, the new hoods from locomotive number V 60 1053 onwards had straight front ends, except for rounded corners, with the lamps mounted directly on the front.
Pre-order, release expected in Q4 2027
Diesel locomotive Class V 100 of the Deutsche Reichsbahn. First series version in burgundy red livery with two decorative stripes Roof hatches integrated into the front end Bogies fully fitted with brake lines High tractive effort and excellent running characteristics In digital mode with switchable headlight/tail light, shunting light and driver's cab lighting The V 100 of the Deutsche Reichsbahn, often referred to as the "V 100 Ost", was one of the most important diesel locomotives in the medium-power range of the former GDR. It was developed from the early 1960s onwards to gradually replace older steam locomotives in passenger and freight services. In total, over 1,100 locomotives of this class were built between 1966 and 1985 at the VEB Lokomotivbau "Karl Marx" in Babelsberg. Each production series differed in specific details. For example, the bonnets and their roofs on the first locomotives (V100 003–043) were designed differently from those on later-series locomotives.
Pre-order, release expected in Q4 2027
Diesel locomotive 118 068 of the Deutsche Reichsbahn. Service condition as of October 1977 4-axle version with finely detailed wheel sets With a round door cut-out Finely detailed model with many separately applied plug-in parts With vertical grab rails at the front In digital mode with switchable headlight/tail light, driver's cab and engine room illumination The 118 068 belonged to the V 180 series of diesel locomotives of the Deutsche Reichsbahn. It was used for passenger and goods train services on non-electrified lines. Originally designated V 180 068, it was assigned the running number 118 068-6 in 1970. With its distinctive front end and four-axle design, it was a typical example of the early Class 118.
Pre-order, release expected in Q1 2027
Diesel locomotive 280 008 of the Deutsche Bundesbahn. Separately applied grab rails Elaborately profiled wheel discs In digital mode with switchable headlight/tail light Alongside the V 200 and the VT 11.5 TEE multiple unit, the V 80 is among the best-known and most elegant examples of early Deutsche Bundesbahn diesel rolling stock. Powered by a 1,000 hp diesel engine, the V 80 was designed as a multi-purpose locomotive for hauling light passenger and freight trains on main and branch lines, as well as for shunting duties. The last locomotives were withdrawn from service in 1978.
Pre-order, release expected in Q4 2027
Diesel locomotive Class 203 of DB Netz AG. Mould variant! New frame with separately fitted AK buffer beam First time featuring shunter's grab rails below the buffers PCB update Free-standing, delicate grab rails In digital operation, with switchable headlight/tail light, shunting light and driver's cab illumination New, authentic sound DB Netz AG is the rail infrastructure company of Deutsche Bahn AG. It is responsible for the rail network, which spans just under 33,400 kilometres, including all facilities necessary for operations. To this end, it maintains its own fleet of locomotives and coaches.
Pre-order, release expected in Q4 2027
Diesel locomotive 2143 038 of the Austrian Federal Railways. Mould variant! Version from the 3rd production series with a straight frame Valousek design in blood orange/ivory Authentic roof with an antenna Free-standing grab rails, some made of metal In digital operation with switchable high beam, headlight/tail light and driver's cab lighting With new, comprehensive sound The locomotives of the 2143 class were built between 1964 and 1977 and operated on non-electrified main and branch lines, particularly in eastern Austria. They were commonly used for both passenger and goods trains. A total of 77 locomotives were delivered to the ÖBB by the Simmering-Graz-Pauker-Werke. A large part of the 2143 class locomotive stock consisted of the third production series, which was further divided into subclasses. The so-called 3a class included running numbers 2143.34 – 43, while the 3b class covered 2143.44 – 70. All locomotives in the third series share several common features: the frame is straight and, unlike the first series, not cranked. The areas around the driver's cab doors have long rain gutters, and the door windows are framed in metal. Likewise, the fuel-filling areas were redesigned and have different dimensions.
Pre-order, release expected in Q3 2027
Diesel locomotive V 240 001 of the Deutsche Reichsbahn. Model in special livery 6-axle version with finely detailed wheel sets With a round door cut-out Finely detailed model with many separately applied plug-in parts With vertical grab rails at the front In digital operation with switchable headlight/tail light, driver's cab and engine room lighting The V 240 001 was a high-performance test locomotive of the Deutsche Reichsbahn, developed from the V 180 class. The six-axle locomotive had 2 × 1,200 PS and was designed for a top speed of 140 km/h. As a special showcase piece of GDR locomotive engineering, it was also exhibited at the Leipzig Trade Fair.
Pre-order, release expected in Q4 2027
"Halberstädter" - 1st/2nd class coach, type ABomz 512, of the Deutsche Bahn. Traffic red livery Side walls with a continuous rain gutter Modified bogies of the Görlitz V type Free-standing grab rails Buffer beam can be retrofitted
Pre-order, release expected in Q1 2027
"Halberstädter" - 2nd class coach, type Bomz 520, of the Deutsche Bahn. Traffic red livery Side walls with a continuous rain gutter Modified bogies of the Görlitz V type Free-standing grab rails Buffer beam can be retrofitted Item no. 74814: Modified running number
Pre-order, release expected in Q1 2027
"Halberstädter" - 2nd class coach, type Bomz 520, of the Deutsche Bahn. Traffic red livery Side walls with a continuous rain gutter Modified bogies of the Görlitz V type Free-standing grab rails Buffer beam can be retrofitted Item no. 74813: Modified running number
Pre-order, release expected in Q1 2027
Electric locomotive 370 007 of the PKP Intercity. Version in the current design Elaborate “roof garden” with four pantographs Finely-detailed model with separately attached handle rails Shortly after delivery of the ÖBB class 1216, the Polish State Railways also ordered ten of the Siemens locomotives designated class 370s by the PKP. In the PKP, these locomotives bore the name “Husarz” in contrast to their ÖBB counterparts, which were named “Taurus”. The locomotives are daily for hauling Eurocity trains, and therefore come regularly to Berlin and Prague.
Pre-order, release expected in Q3 2027
Electric locomotive E 469 170 of the Czechoslovak State Railways. Based on the Škoda works type 43E In dark green livery Pantograph with innovative mounting Intricately detailed bogies and spoked wheels Fine metal wheels with low flanges Some signage is also included as etched parts In the early 1960s, the former Czechoslovak State Railways (CSD) required new, high-performance electric freight locomotives for the 3 kV DC system in the north and east of the country. Experience with the E 499.0 and E 499.1 classes, originally developed as universal locomotives, showed that they were better suited to passenger operations. Consequently, while the E 499.157 locomotive was still in production, it was modified for freight service and designated E 469.001. It retained the same power output, but the manufacturer fitted it with a modified axle gearbox. Its service weight was increased to 88 tonnes by adding ballast. The production locomotives featured a modified body. Unlike the E 499.0, which had six circular windows on each side panel, the locomotives of the series E 499.1 and E 469.1 had four rectangular windows. With a continuous power output of 2,032 kW, they could reach a maximum speed of 90 km/h. In total, Škoda delivered 85 locomotives to the Czechoslovak State Railways. The locomotives were primarily used to haul freight trains on main lines with gentle gradients. They were primarily used for coal block trains on routes from the North Bohemian lignite basin to the east, and were also in service in Slovakia from the 1960s to the 1990s. As derivatives of the E 499.1 series, these locomotives were fitted with electric train heating and could therefore also be used in passenger trains. The main reason for their limited use on passenger trains was their low top speed. Since the 1960s, most electrified lines had a maximum speed of 100 or 120 km/h. Consequently, the E 469.1 class locomotives were too slow for passenger trains. Nevertheless, they could often be seen in passenger service on selected routes. In 1988, the class designation was changed from E 469.1 to 121. Some units were also transferred to the Slovakian railway company ZSSK. Since then, several locomotives have been modernised and acquired by private operators. Slovakia from the 1960s to the 1990s. As derivatives of the E 499.1 series, these locomotives were fitted with electric train heating and could therefore also be used in passenger trains. The main reason for their limited use on passenger trains was their low top speed. Since the 1960s, most electrified lines had a maximum speed of 100 or 120 km/h. Consequently, the E 469.1 class locomotives were too slow for the use in passenger trains. Nevertheless, they could often be seen in passenger service on selected routes. In 1988, the class designation was changed from E 469.1 to 121. Some units were also transferred to the Slovakian railway company ZSSK. Since then, several locomotives have been modernised and acquired by private operators.
Pre-order, release expected in Q2 2027
Electric locomotive 116 015 of the Deutsche Bundesbahn. Paintwork in faded operational condition with touch-up spots Finely detailed model with separately applied plug-in parts Authentic replica of the Buchli drive unit Printed engine room and driver's cab Driver's cab and engine room lighting installed; can be switched in digital mode The E 16 class was the only German locomotive type to feature a Buchli drive. After an extended tender phase, the Gruppenverwaltung Bayern of the Deutsche Reichsbahn initially ordered one electric express locomotive from BBC in 1923 for its main lines slated for electrification. Following an intensive testing period, a further batch of 16 units was commissioned to keep the designation ES 1. These locomotives, featuring a 1’Do1’ wheel arrangement, were powered by the single-sided, single-axle drive developed by Swiss engineer Jakob Buchli, which had already proven itself in the SBB Ae 3/6 I series. The two production batches, which differed in the design of the steering bogies, were delivered in 1926 and 1927. The maximum speed was 110 km/h (later increased to 120 km/h), with an hourly rating of 2,340 kW. Thanks to their good performance, a further seven units were ordered, entering service as E 16 11 to 17 in 1928 and 1929. These later units were fitted with more powerful traction motors, increasing the hourly rating to 2,580 kW. To meet the requirements of the Munich–Stuttgart route, four modified versions were built in 1932 and 1933, designated E 16.1. These units differed significantly from the E 16 01-17, most notably by the larger inbuilt transformers housed in the roof area. Their hourly rating was increased to 2,944 kW. During their 52 years of service, the class, redesignated as E 16 under the new numbering system and later as 116 in 1968, proved highly reliable, despite the complex maintenance required by the Buchli drive. The locomotives were known for their exceptionally smooth running. In their early years, the E 16s were assigned to prestigious express trains departing from Munich, and throughout their career, they regularly hauled express and fast trains in Bavaria and to Austria. At their peak, they were entrusted with three F-Zug (premium express) services, including the famous F 5/6 Orient Express, as well as 42 D-Zug pairs (limited-stop services). At the end of 1958, the Deutsche Bundesbahn reassigned all E 16 locomotives to the Freilassing depot, where they received exceptional care and maintenance, allowing them to remain in front-line service until the 1970s. Scheduled service with this class ended in 1978. FREILASSING EDITION In the coming years, selected locomotive classes that once operated from the historic Freilassing railway depot will be reproduced under the exclusive ‘Freilassing Edition’ label. In 1905, the first locomotives, still steam-powered at the time, arrived at the engine shed, which had 20 tracks. Around two decades later, an electric locomotive workshop was added, with several other buildings constructed in the subsequent years. ROCO also shares a special connection with the Bavarian town of Freilassing, as this is where the company established its first German sales office. Look forward to a range of authentically detailed models in this special edition, inspired by the history and engineering excellence of Freilassing.
Pre-order, release expected in Q2 2027
Electric double locomotive IORE 134 + 113 of Luossavaara Kiirunavaara Aktiebolag (LKAB). Update! For the first time with the PluX22 interface Both locomotive halves connected via a new electric coupling Windscreen wipers separately applied High tractive effort provided by two motors Fine-scale pantographs The IORE is considered one of the most powerful electric locomotives in the world. With a power output of more than 10 megawatts, the twelve-axle, nearly 46-metre-long double locomotive IORE from the company Adtranz (now Bombardier Transportation) took iron ore transport on the 536-kilometre railway line between Kiruna, Lula and Narvik to the next level. By 2014, a total of 17 machines of this class had been put into operation, drastically reducing transport costs thanks to higher speeds and greater hauling capacity.
Pre-order, release expected in Q3 2027