Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Busch 54401 · TIH 445 tractor with crane hook

Product information "TIH 445 tractor with crane hook"

The TIH 445 mobile crane was first developed as the T 159 (also MDK 16) from 1970 at the VEB (Volkseigener Betrieb, people's own enterprise) Landmaschinenbau "Rotes Banner" in Döbeln, Saxony. The self-propelled, pneumatic-tyred T 159 working machine had front-wheel drive and rear steering. The slightly slanted-looking driver's cab is mounted between the front and rear axles and the drive engine is located above the steering axle, while a slewing device for the boom was mounted above the front axle.

The necessary folding outriggers of the T 159 are mounted behind the front axles. Like so many vehicles of the GDR, the T 159 also draws on the proven modular system. Thus the two axles and the steering with hydraulic power assistance come from the IFA W50 lorry. The main boom is built on a slewing ring with a double row of steel balls, and the rotation takes place via a rack-and-pinion slewing drive of 230 degrees in the direction of travel. So that various tools can be attached, the boom, which is bent at the front, is hinged to the main boom. It can thus be extended by one metre in five stages by means of a telescopic section.

The successor TIH 445 is based on the further development of the T 159 and was produced at the "Landmaschinenbau 7. November" in Craiova, Romania. Fundamental changes are the smaller front wheels and the outriggers, now fitted in front of the front axles. A further improvement is the four-stroke diesel engine with direct injection.

Technical data:

Four-stroke diesel with direct injection / 3 cylinders

Water cooling

33.1 kW (45 PS)

DIN at 2400 rpm

Stroke: 110 mm

Displacement: 2340 cm3

Max. torque 140 Nm (14.3 mkp) at 1200 rpm

Compression ratio 17:1

Air filter with cyclone pre-separator

Distributor injection pump

Gearbox: mechanical, 3 gears and range gearbox (6 gear steps)

Travel speed: in km/h, at nominal engine speed, (12.5x20 tyres and 10/47 bevel final drive)

1st gear 2.05

2nd gear 3.71

3rd gear 5.85

4th gear 7.39

5th gear 13.37

6th gear 21.05

1st reverse gear 3.02

2nd reverse gear 10.90

The TIH 445 could be built with the following optional equipment: load hook, grab base frame, digging grab, bulk material grab, fork grab, root crop grab, five-shell grab, ditch and foundation grab, round timber grab, pole and block tongs, earth auger: Ø 250 x 1000 mm depth, Ø 500 x 2000 mm depth, reduction gear and hydraulic motor for auger drive, rotary knob and grab extension.

The 1:87 model of this robust all-rounder impresses with sharp contours and perfect reproduction of the prototype and forms the basis for an outstanding model range with a variety of uses. Also noteworthy on this model is the delicate, fully movable articulated arm with an opening grab.

In addition, the articulated arm, fitted with working hydraulic rods, is mounted on a rotating plate as on the original and can thus be turned into different positions. The hydraulic outriggers on the undercarriage also impress with realistically working hydraulic rods, which, as in the articulated arm, are even picked out in a different colour. The fully functional and movable miniature leaves nothing to be desired and enriches any model collection with its many lovingly executed details.

The model

Scale H0

Identification

Barcode 4001738544015