Track
With an illuminated ground signal using an LED. Length 16 mm. To be screwed on at the end of the track. A countersunk wood screw is included.
In stock: 3 on the shelf, shipped within 1-3 days
Length 15 mm. For clipping onto the running rails.
In stock: 3 on the shelf, shipped within 1-3 days
... nothing derails! With the Tiny Scenes you can create a realistic scene such as waiting at a railway station or in an entrance hall. In this scene, a track worker with an orange waistcoat and dark trousers is working on the tracks with a yellow tool.
In stock: 3 on the shelf, shipped within 1-3 days
Es gibt viele anfallende Arbeiten am Bahnhof Einfach bemalt zum günstigen Preis! Die Arbeiter "Gleisbautrupp" sind in typischen Posen wie schweißen oder mit schwerem Vorschlaghammer dargestellt. Auf einer Gleisstrecke der Modelleisenbahn gibt es immer etwas zu tun. Das Set „Gleisbautrupp“ sollte deshalb auch auf Ihrer Anlage keinesfalls fehlen. Ob Arbeiten an den Schienen, dem Bahnsteig oder auch an den Zügen selbst – der „Gleisbautrupp“ hat alle Hände voll zu tun. Das Figuren-Set beinhaltet 6 arbeitenden Figuren. Die Figuren haben alle orangfarbene Arbeitskleidung an, damit sie bei ihren Arbeiten auf dem Gleis auch immer gut gesehen werden. Die Arbeiter haben unterschiedliches Werkzeug wie eine Schaufel, einen Sauger und einen Axt in der Hand. 2 der Figuren kniehen auf dem Boden und meistern ihre Arbeit. 4 der Figuren tragen ein Kopfbedeckung. Die Hobby-Figuren sind einfacher bemalt als die „normalen“ NOCH Figuren. Daher sind die Hobby-Figuren die erste Wahl, wenn es darum geht Plätze, Dörfer, Städte, Bahnsteige, Parks, Felder, Waggons und vieles mehr preisgünstig zu bevölkern. Die besonders preiswerten NOCH Hobby-Figuren erkennen Sie an der roten Verpackung. Hobby-Figures, 6 Figures (without benches)
In stock: 3 on the shelf, shipped within 1-3 days
Track fixing pins, short. For fastening tracks without roadbed, approx. 400 units per bag.
In stock: 3 on the shelf, shipped within 1-3 days
Feeder track, for analogue operation. With EMC intereference suppression unit. Length 115 mm (half standard length). Not suitable for digital operation! This can cause malfunctions in digital mode, so please remove the interference-suppression capacitor when converting the railway layout to digital mode.
In stock: 3 on the shelf, shipped within 1-3 days
With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of a track layout. The size and colour of the sleeper goes with the ROCO LINE-track, thus camouflaging the contact. Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.
In stock: 3 on the shelf, shipped within 1-3 days
Wheel retracker set. Places derailed wheels back on track. For GEOLINE and ROCO LINE tracks. (Construction kit without track).
In stock: 3 on the shelf, shipped within 1-3 days
Spring steel rail joiners for geoLine and ROCO LINE tracks. Content: 24 pieces/pack.
In stock: 3 on the shelf, shipped within 1-3 days
Turnout right hand, manually operated. Length 200 mm (standard length), branch radius 502.7 mm, branch angle, 22.5°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The polarization of the turnout frog is prepared.
In stock: 3 on the shelf, shipped within 1-3 days
Double slip turnout, manually operated. Length 200 mm (standard length), branch radius 502.7 mm, crossing angle 22.5°. The two manual turnout mechanisms can be replaced by the electric turnout mechanism 61195. For digital operation is the special turnout decoder 61196 available. Due to the electrical requirements of this type of slip turnout it is delivered with factory installed polarization.
In stock: 3 on the shelf, shipped within 1-3 days
Silicone mould for tunnel interior wall with recesses. Tunnel interior wall with recesses, for single- and double-track portals with overhead line equipment such as 6304, 6306, 6317; width x height x thickness: 86 x 80 x 18 mm.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model Point - 15° with a polarised common crossing. Straight track 112.6 mm. Curve radius = R 4 -15° + 1 x 14503. An electric drive can be retrofitted. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a left-hand point with concrete sleepers 112.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The points with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel Note The common crossing of these points is made of metal and is continuously supplied with power by means of a built-in switch, i.e. a permanent current feed that is automatically reversed in polarity in accordance with the respective point setting.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Across Europe, concrete sleeper track has now become the standard – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with a Code 60 rail profile conforming to NEM. Model Point - 15° with a polarised common crossing. Straight track 112.6 mm. Curve radius = R 4 -15° + 1 x 14903. An electric drive can be retrofitted. Minitrix track is the ideal track for quickly building a track layout on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N gauge layout on a solid base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this ensures unsurpassed contact reliability between wheel and rail. For easy expansion of your layout there are also various track extension sets with item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights The illustration shows a right-hand point with concrete sleepers 112.6 mm. The Minitrix rail profile is based on the UIC 60 prototype profile and correctly implements Code 60 to NEM The points with their grey concrete sleeper look have solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for power transmission to the wheel Note The common crossing of these points is made of metal and is continuously supplied with power by means of a built-in switch, i.e. a permanent current feed that is automatically reversed in polarity in accordance with the respective point setting.
In stock: 3 on the shelf, shipped within 1-3 days
(Below-baseboard mounting on the right).
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and experts. Model Minitrix right-hand point 15° with a polarised common crossing. Straight track 112.6 mm. The click connection with the "Click". Set up and taken down in next to no time. Stable and durable. Curve radius = R 4 -15° + 1 x 14903. Stop-point function optional. An electric drive can be retrofitted. The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is the careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails of a stainless special alloy. Together with the prototypical profile cross-section this ensures unsurpassed contact reliability between wheel and rail. For easily expanding the layout there are also various track extension sets with item no. 14311 and 14312. This makes it easy to build up parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operational reliability Quick setting up and taking down Note The common crossing on these points is made of metal and is constantly supplied with power via a built-in switch, i.e. a permanent power feed whose polarity is automatically reversed with the respective setting of the point.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point R3/R4, left-hand, with polarised common crossing. The R3/R4 curved point was developed on the same principles as the R1/R2 curved point, except that it is matched to radii R3 and R4 and that a curve angle of 30° can be allowed for. The track alignment is therefore considerably slimmer. Even so, the space required is still not too great for smaller layouts. Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix point combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix curved point, left-hand, R1/R2. The R1/R2 curved point is specially matched to the curved tracks of these two radii, i.e. the inner curve of the point corresponds to radius 1, the outer one to radius 2. In both cases, however, it is a curve of special shaping, in order to allow these points to be used as versatilely as possible. Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling Note Curved points for radii 1 and 2. The point curve corresponds to 42°. Stop-point function optional. An electric drive can be retrofitted.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix connecting track with interference suppression. Required as the first connecting track for every circuit (= controller). Removable connection terminals. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix re-railing device combines robustness, electrically reliable connections and a prototypical appearance. Model For re-railing derailed vehicles while running. Minitrix re-railing device with a length of 104.2 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance with metal rails
In stock: 3 on the shelf, shipped within 1-3 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as you wish. The ideal track system for newcomers and professionals. Model Minitrix transition track for connecting to the Arnold* track system, with a length of 59.0 mm. The click connection. Set up and taken down in no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track formation on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a relatively greater effect in 1:160 scale than in larger scales. For trouble-free operation, it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a special stainless alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easily expanding your layout there are also various track extension sets with the item nos. 14311 and 14312. This makes it easy to build parallel circuits, passing loops and sidings. Highlights Prototypical appearance Electrical operating reliability Quick to set up and take down Note *ARNOLD is a trademark of Hornby Hobbies Limited 2021, Great Britain.
In stock: 3 on the shelf, shipped within 1-3 days
For fastening track to wood. 0.8 x 10 mm. Contents 50 g/pack.
In stock: 3 on the shelf, shipped within 1-3 days
Precision steel screws with a turned 1.2 mm wood screw thread (7 mm long). 150 pieces/pack.
Content: 150 pc. (CHF 0.09 / 1 pc.)
In stock: 3 on the shelf, shipped within 1-3 days
Chiefly for joining the 14501 flexible tracks to one another and to other tracks. 10 pieces/pack.
In stock: 3 on the shelf, shipped within 1-3 days