Track
Complete set: 2 warning lights, each with 2 red and 1 yellow LED, electronic flashing circuit and St Andrew's crosses for single- and double-track level crossings. Ready for installation and function-tested.
On order, lead time to be confirmed
Two warning lights, each with two red and one yellow LED, and a flashing circuit. When a train approaches, the red lamps flash alternately; when the level crossing is free for road traffic, the yellow lamp flashes.
On order, lead time to be confirmed
Uniform stone structure, dust-free. Ideal for track ballast, paths, as load, etc. By mixing different types of ballast and stones, any prototypical ballast mixtures can be achieved.
On order, lead time to be confirmed
Coal-look ballast stones. Even stone structure, dust-free. Ideal as a load. By mixing the coal stones with other ballast stones, prototypical ballast mixtures can be achieved.
On order, lead time to be confirmed
Highly flexible thanks to the centre cut. The special cork-rubber mix is particularly sound-dampening and easy to trim.
On order, lead time to be confirmed
2 pieces, each 300 x 200 mm, 4 mm thick for self-cutting (for special track sections, points, etc.). The special cork-rubber mixture is particularly sound-dampening and easy to cut.
On order, lead time to be confirmed
Highly flexible thanks to the centre cut. The special cork-rubber mix is particularly sound-dampening and easy to trim.
On order, lead time to be confirmed
2 pieces, each 300 x 200 mm, 4 mm thick for self-cutting (for special track sections, points, etc.). The special cork-rubber mixture is particularly sound-dampening and easy to cut.
On order, lead time to be confirmed
The track (not plug-in) allows a variety of track layouts with sidings and passing loops to be created.
On order, lead time to be confirmed
Classic! »Automobile rest area with petrol pumps and restaurant. Various company signs to put on are included.« First release: 1961. Reissue of the classic B-214 (without motor) in high-quality retro-look packaging, including a reprint of FALLER magazine no. 69. The kit cannot be motorised.
On order, lead time to be confirmed
Signal box model based on an original in Wuppertal-Elberfeld with a crumbling, light plaster façade that exposes the red bricks. The signal box bridge with walkway and railings stretches over a track.
On order, shipped within 4-5 days
Footbridge with two uncovered flights of stairs and covered closed walkway.
On order, shipped within 4-5 days
Faithful reproduction of the original footbridge built in Neustadt, to go with FALLER station »Neustadt/Weinstraße« (art. 110111). Present-day steel and glass construction with two covered stairways, bridge spanning two tracks and two annexed elevator towers (without function). The width of both rising and descending flights of stairs annexed to the bridge can be modified according to a module to match any type of track. Several units can be built side by side. Suitable for catenary operation. Without platforms. Can be used with any type of FALLER platform.
On order, shipped within 4-5 days
Crossing with two staircases for double-tracks. There are various options in building the staircases.
On order, shipped within 4-5 days
Spans up to four tracks.
On order, shipped within 4-5 days
Footbridge with open staircases and covered, closed overhead walkway. Can be assembled in various shapes. Up to 4 rails spanning.
On order, shipped within 4-5 days
Set comprised of a straight viaduct with track bed and high piers. Kit includes a set of bridge abutments and an additional pier to lengthen the bridge. Suitable for Märklin C track and all other track types.
On order, lead time to be confirmed
Set comprised of a curved viaduct with track bed and high piers. A set of bridge abutments and an additional pier allowing to lengthen the bridge are part of the kit. Suitable for Märklin C track and all other track types.
On order, shipped within 4-5 days
This set contains: 4 straight and 8 curved track-beds, 2 piers each of 15, 25, 35, 45, 55 and 65 mm height, 4 piers 75 mm, 6 pier tops 8 mm in order to adjust the height to fit the FALLER-bridges, and connecting tongues for the track-beds. The track-beds are suitable for model- and c-tracks. To extend either side of the ramp, additional piers (art. 120473), straight track-beds (art. 120474) and curved track-beds (art. 120475) are available.
On order, lead time to be confirmed
This set contains: 4 straight and 8 curved track-beds, 2 piers each of 15, 25, 35, 45, 55 and 65 mm height, 4 piers 75 mm, 6 pier tops 8 mm in order to adjust the height to fit the FALLER-bridges, and connecting tongues for the track-beds. The track-beds are suitable for model- and c-tracks. To extend either side of the ramp, additional piers (art. 120473), straight track-beds (art. 120474) and curved track-beds (art. 120476) are available.
On order, lead time to be confirmed
with 6 pier extensions.
On order, shipped within 4-5 days
Straight (as in art. 120470).
On order, shipped within 4-5 days
Curved (as in art. 120470).
On order, shipped within 4-5 days
Curved (as art. 120475).
On order, shipped within 4-5 days