Track
Buffer stop, with end of track indicator. To clip onto H0 tracks at the end of sidings. Also usable on curves.
On order, shipped within 10-15 days
Electrically operated turntable and switchable track exits with nickel silver track. Length of the turning bridge: 183 mm. Suitable for PROFI track and other nickel silver track systems. With turntable switch 6910. FLEISCHMANN has developed a H0 model based on a 16-metre turntable prototype. This turntable has the advantage that it does not require too much space, and therefore also fits onto small systems. In spite of this, locomotives with an axle spacing of up to 170 mm can be rotated, even though the length of the locomotives is in part substantially larger due to the buffers. The turntable is a prototypical trench construction and features all the essential details in this realistic representation. The basic equipment for the turntable includes 6 exit tracks and 4 blank connectors. The exit tracks can be attached and reattached at an angle of 15° as required, and can be extended using turntable supplement set 6155 to a total of 24 track connections. The “intelligent” turntable: The model turntable feeds the driving current into the system via the turntable bridge. When you select the turntable bridge side which should conduct the current using turntable switch 6910, then the turntable “thinks”. It only feeds the track with current which is connected with the selected side of the turntable bridge. Using this “intelligent” turntable, a locomotive can be de-energised and parked on a track, and at the same time a locomotive can be driven on the opposite track, which is connected to the turntable bridge.
On order, shipped within 10-15 days
Extension set for the smaller turntable 6154. The set contains 3 exit tracks and 3 over-run ends.
On order, shipped within 10-15 days
Ungated level crossing for PROFI track. With one rerailer and two level crossing signs. Track length: 100 mm.
On order, shipped within 10-15 days
Electromagnetic universal point motor with end-off switching for FLEISCHMANN ballasted tracks H0 and N. Prepared to accept the clip-in illuminated point lantern 644020 (H0) / 944001 (N) This point motor can be either plugged onto the railway layout board or underneath the railway layout board. For this purpose, a slot is cut into the railway layout where the point motor comes to rest. The universal point motor 640000 replaces the items 644110, 644210, 942101 and 942201.
On order, shipped within 10-15 days
Flexible rack track for FLEISCHMANN H0 PROFI track. Length 200 mm. Flexible - to install in straight or curved tracks. Can be used from the smallest radius (R1).
On order, shipped within 10-15 days
Point lantern to optionally retrofit for a left, a right or a three-way point. Illumination with maintenance-free LEDs From the turnout independent power supply Can not be used with double slip switches and high-speed switches
On order, shipped within 10-15 days
Electrical plug-in motor for manually operated uncoupler track 6114.
On order, shipped within 10-15 days
For H0 signals 6200/6201/6205/6206 to clip onto the model tracks
On order, shipped within 10-15 days
Electrically operated turntable for 3-rail AC system, with turntable control switch 6909. The turntable is prototypically mounted in a recess and fitted with accurate details. As delivered, there are 6 exit tracks and 4 over-run ends. The exit tracks can be unclipped and repositioned at an angle of 7,5° as desired, or extended using the turntable extension set 665301 right up to the complete 48 exits. Installation dimensions: Required installation opening: 340 mm. Installation depth measured from table top edge: 30 mm. External diameter of the turntable with track connections: 465 mm. Turntable bridge length: 310 mm. Note: Control your turntables easily – with TURN-CONTROL, the electronic turntable control device (item No. 6915).
On order, shipped within 10-15 days
Extension set for the AC turntable 665201 for 3-rail AC operation with nickel silver tracks. The set contains 3 exit tracks and 3 over-run ends.
On order, shipped within 10-15 days
Sliding wall wagon “FLEISCHMANN Clean” for cleaning the tracks of the German Federal Railway. Simply integrate into a normal train Your rails will always be kept perfectly clean Track cleaning wagon with real cleaning effect. Dust, rubber abrasion and oil etc. are reliably removed. The rail surface is not attacked during this process, meaning that new dirt will not settle again quickly.
On order, lead time to be confirmed
For crossovers 15° or 30°.
On order, shipped within 10-15 days
Turntable controller with track pre-selection TURN-CONTROL is suitable for analogue and digital control of the turntables art. no. 6152, 6154, 665201, 9152 and 35900. An LCD display gives a visual indication of the setting of the turntable bridge, the location of the track exits installed and shows the active track exit, together with additional functions. Symbols of the active functions give it a simple, user-friendly operation. Each track exit can be individually controlled. Because the polarity change is catered for by the switch, when rotating through 360°, the turntable is protected against short circuit. The turntable control switch is suitable for operation wtih 2-rail DC operation, the 3-rail AC operation, and will also operate with all digital systems - DCC, FMZ and Märklin-Digital (contains a turntable decoder). No changes or alterations to the turntable are necessary. Content: - TURN-CONTROL 6915 Controller - Connection cable 396865 (for power feed) - 7-pole connecting plug - Operating manual Märklin is a registered trademark of the company of Gebr. Märklin & Cie. GmbH, Göppingen.
On order, shipped within 10-15 days
To operate double-arm semaphore signals with electric motor.
On order, shipped within 10-15 days
With train control - to operate colour light signals without electric motor.
On order, shipped within 10-15 days
Signal switch to operate single-arm semaphore signals.
On order, shipped within 10-15 days
The track plan manual explains the geometry of the ballasted tracks of FLEISCHMANN in scale N. Many track layouts and expansion options are shown in details. All featured track layouts are provided with parts lists.
On order, shipped within 10-15 days
Model Turntable, electrically driven, with individual electrically switchable track exits, with turntable switch 6910. Length of the turning bridge 183 mm. The Model: The turntable is sunk into the ground, exactly like the real thing and is complete with all the correct detailling. The basic turntable has 6 exit tracks and 4 stub tracks. The track exits are set at 7,5° intervals, but can be altered if desired, or extended with the extension set 9153 up to total of 48 track exits. The "thinking" turntable: The turntable movement is controlled by using the switch 6910, in order to reach the desired track exit. The track power feed is via the turntable bridge. Now the switch 6910 will enable the desired track exit, which is lined up with the turntable, to be electrically switched on. All the other track exits (even one directly opposite) will remain without power. In this way, each of the maximum of 48 track exits can be individually controlled and electrically switched on, without the need for any additional wiring. Note: Control your turntables easily – with TURN-CONTROL, the electronic turntable control device (item No. 6915).
On order, shipped within 10-15 days
Turntable extension set for turntable 9152 containing 3 exit tracks and 3 over-run ends.
On order, shipped within 10-15 days
Track set B1 (tracks with ballast bed). Contents: 6 straight tracks (9100) 1 straight track (9101) 1 manual turnout left (9170) 1 buffer stop (9116) Layout size: 118 cm x 40 cm The track set STARTSET is the minimum layout contained in all starter sets with FLEISCHMANN tracks with ballast bed and cannot be purchased separately. All other track sets are extensions of this layout. (STARTSET+B1)
On order, shipped within 10-15 days
Track set C1 (tracks with ballast bed). Contents: 1 straight track (9100) 2 straight tracks (9101) 1 manual turnout right (9171) 1 manual curved turnout right (9175) 1 curved track (9136) 1 uncoupler track (9114) Layout size: 118 cm x 44 cm The track set STARTSET is the minimum layout contained in all starter sets with FLEISCHMANN tracks with ballast bed and cannot be purchased separately. All other track sets are extensions of this layout. (STARTSET+B1+C1)
On order, shipped within 10-15 days
Track set D1 (tracks with ballast bed). Contents: 9 straight tracks (9100) 3 straight tracks (9101) 7 curved tracks (9125) 2 manual turnouts left (9170) 1 manual curved turnout left (9174) 1 buffer stop (9116) Layout size: 147 cm x 48 cm The track set STARTSET is the minimum layout contained in all starter sets with FLEISCHMANN tracks with ballast bed and cannot be purchased separately. All other track sets are extensions of this layout. (STARTSET+B1+C1+D1)
On order, shipped within 10-15 days
Track set E1 (tracks with ballast bed). Contents: 2 straight tracks (9101) 2 manual tournouts left (9170) 2 manual turnouts right (9171) 1 uncoupler track (9114) 2 curved tracks (9120) 2 buffer stops (9116) Layout size: 147 cm x 48 cm The track set STARTSET is the minimum layout contained in all starter sets with FLEISCHMANN tracks with ballast bed and cannot be purchased separately. All other track sets are extensions of this layout. (STARTSET+B1+C1+D1+E1)
On order, shipped within 10-15 days