Track
Prototype Ground signal in the standard design of the German Federal Railway (DB). Dwarf signal without a mast. 2 aspects: "Stop, no movement permitted" - red/red (Sh0) and "Movement permitted" - white/white (Sh1). Model With integrated signal electronics and 1 separate signal decoder. Plug contact on the narrow foot of the signal head. Signal head with small sun visors. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control. Height without the base 10.0 mm. Highlights Ground signal for use in the shunting area Signal head on a prototypically narrow stand Sh1 aspect correctly with 2 white lights
On order, shipped within 10-15 days
Prototype Ground signal in the standard design of the German Federal Railway (DB). High signal with a tubular mast. 2 aspects: "Stop, no movement permitted" - red/red (Sh0) and "Movement permitted" - white/white (Sh1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control. Height without the base 50.0 mm. Highlights Ground signal for use in the shunting area Prototypically thin tubular mast Sh1 aspect correctly with 2 white lights
On order, shipped within 10-15 days
Prototype Exit signal in the standard design of the German Federal Railway (DB). 4 aspects: "Stop" - red/red (Hp00), "Clear" - green (Hp1) and "Slow speed" - green/yellow (Hp2) as well as "Stop for trains, shunting permitted" - red/white/white (Hp0/Sh1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 distant signal. Height without the base 78 mm. Highlights Exit signal for use in stations Matching distant signal separately as item no. 76480 and 76481 or on the entry signal item no. 76497 Integrated ground signal with a white light
On order, shipped within 10-15 days
Prototype Block signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 2 aspects as with item no. 76491. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Block signal for use on the line Distant signal for use ahead of a block signal or an entry signal
On order, shipped within 10-15 days
Prototype Exit signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 4 aspects as with item no. 76494. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Exit signal for use at the end of a station or at the entrance to the main line Distant signal for use ahead of a block signal or an entry signal
On order, shipped within 10-15 days
Prototype Entry signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 3 aspects as with item no. 76493. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Entry signal for use ahead of stations Distant signal for use ahead of an exit signal
On order, shipped within 10-15 days
Model Contents: 10 straight tracks, 2 curved tracks, 2 points and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Contents: 10 straight tracks, 2 curved tracks, 2 points, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Contents: 6 straight tracks, 6 curved tracks, 2 electromagnetic curved points, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
Pre-order, release expected in 2027
Model Contents: 8 straight tracks, 2 curved tracks, 2 electromagnetic curved points, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Contents: 10 straight tracks, 1 double slip, 2 electromagnetic points, 4 buffer stops, a control panel, a distribution plate, connecting material and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
Pre-order, release expected in 2027
Model Contains all the parts for assembling the S+E catenary. Contents: 19 masts for the catenary, 20 contact wire sections, 8 isolating sections, 6 connecting springs and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Model Addition to 8198 for T1 to T3. Contents: 4 masts for the catenary, 16 tower masts, 30 contact wire sections, 8 cross connections, 30 contact wire insulators, 8 isolating sections, 6 connecting springs, 5 contact wire clamps and assembly instructions. Note The SET assembly programme is a system with a continuation, with which you can extend the track sections of the starter sets step by step. After starting with the 81530/81535 or 81562 starter set, you extend it with the E 8190 or E 8191 pack. You can then systematically expand your layout in any order with the T1 8192, T2 8193 and T3 8194 track packs. If you start with the 81781/81785 or 81852 starter sets, you already have the E 8191 extension pack integrated and further expansion can then again be carried out without any problem with the T1 8192, T2 8193 and T3 8194 track packs. The 8198 catenary pack for S+E and the 8199 catenary pack for T1+T2+T3 make it easier within the SET programme to get started with fully functional catenary operation, with which two trains can be controlled independently of each other on one line.
On order, shipped within 10-15 days
Connection adapter, for example for connecting consumers such as signals to a switched-mode power supply. Equipped with a matching socket and 2 plugs (71411, 71412). Total length approx. 145 mm.
On order, shipped within 10-15 days
Prototype Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals alike. Model Märklin curved contact track with a radius of 195 mm. 30°. With connection terminals. A moving train triggers the switching function. The click connection with the "Click". Set up and taken down in no time at all. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Fast setting up and taking down
On order, shipped within 10-15 days
Prototype The Märklin track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin curved circuit track with a radius of 220 mm. 30°. With connection terminals. A train running over it triggers the switching function. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down
On order, shipped within 10-15 days
Prototype The Märklin left-hand manual point combines robustness, electrically reliable connections and a prototypical appearance. The manual point can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin left-hand manual point with a length of 110 mm. 13°. Radius 490 mm. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down
On order, shipped within 10-15 days
Prototype The Märklin right-hand manual point combines robustness, electrically reliable connections and a prototypical appearance. The manual point can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin right-hand manual point with a length of 110 mm. 13°. Radius 490 mm. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability. Quick setting up and taking down
On order, shipped within 10-15 days
Prototype The Märklin isolating track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin straight isolating track with a length of 55 mm. With connection terminals. One length of rail is interrupted in the middle. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability. Quick setting up and taking down
On order, shipped within 10-15 days
Prototype The Märklin circuit track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin straight circuit track with a length of 55 mm. With connection terminals. A train running over it triggers the switching function. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability. Quick setting up and taking down
On order, shipped within 10-15 days
Prototype Special buffer stop for shifted loads, of the kind found on railway tracks for many decades and even, in isolated cases, still today. Model Delicately laser-cut kit for a buffer stop for shifted loads, for Märklin Z track. Precisely fitting model made of hard architectural card with a reproduction of the gusset plates. A small but fine detail for layout building, with prototypically implemented dimensions. 2 kits are included in the contents supplied. To be glued with commercially available wood glue, among other things (Bindan, Ponal etc.). Dimensions per buffer stop: L x W x H approx. 17 mm x 16 mm x 20 mm. Highlights Suitable for many eras (II-VI) Delicate model An important detail
On order, shipped within 10-15 days
Basic element with a mounting plate. Height 38 mm.
On order, shipped within 10-15 days
For the power feed. With a mounting plate and a connecting cable. Height 38 mm.
On order, shipped within 10-15 days
For clamping to the side of bridges and ramp sections. Height 41 mm.
On order, shipped within 10-15 days