Track
New for 2021: The re-railer makes it easier to place the vehicles on the track. Additionally optimised for A track with ballast.
On order, shipped within 4-5 days
Item no.: 55713
On order, lead time to be confirmed
Approx. 14 x 15 cm
On order, shipped within 4-5 days
Replaces item # 55725 level crossing with barrier, approx. 14 x 15 cm
Pre-order, ships on release
Item no.: 55752
On order, shipped within 4-5 days
Item no.: 55753
On order, shipped within 4-5 days
Signal switch with feedback and train control. With one switch, two two-aspect light signals (e.g. 40020, 40021, 40600, 40601, 40602, 40603, 40604) can be operated without magnetic drive. Further switches can be plugged into the side.
On order, shipped within 10-15 days
Z21 signal DECODER The Z21 signal DECODER is a universally applicable DCC decoder for complex light signals. Operation is even easier with the Z21 app as the signal types are also stored in the app and can be read out automatically from the decoder. This can be conveniently done via Z21 pro LINK. Updateable Extensively configurable RailCom compatible Over 30 signal types are included, such as: Germany: H/V signals, Ks signals, HI signals, block signals, ... Austria: Main signals class 1980 and 1954, pre-signals, protections signals, ... Switzerland: System L, system N, Signals for shunting service, ... Additional signal types can of course be added by using the update function via the Z21 pro LINK. RailCom is a registered trademark of the company Lenz Elektronik GmbH.
On order, shipped within 10-15 days
Straight narrow gauge track. Length 134.4 mm (standard length). Gauge: 9 mm.
On order, shipped within 10-15 days
Straight narrow gauge compensation track. Length 47.9 mm. Gauge: 9 mm.
On order, shipped within 10-15 days
Curved track. Radius 261.8 mm (standard radius), arc angle 30°. Gauge: 9 mm.
On order, shipped within 10-15 days
Curved track. Radius 493 mm, arc angle 13.1°. Gauge: 9 mm. Opposite curve for narrow gauge turnouts.
On order, shipped within 10-15 days
Sleeper end piece, matches light railway flex track 32201.
On order, shipped within 10-15 days
Light railway turnout, left, with electric motor. Length of the straight track 104.2 mm. Branch angle 24°. Radius of the branch track 194.6 mm. Gauge: 9 mm.
On order, shipped within 10-15 days
Light railway turnout, right, with electric motor. Length of the straight track 104.2 mm. Branch angle 24°. Radius of the branch track 194.6 mm. Gauge: 9 mm.
On order, shipped within 10-15 days
Turnout, left hand, with metal turnout frog. Without turnout mechanism. Length of the straight track 134.4 mm (standard length), branch angle 15°, branch radius 493 mm. Gauge: 9 mm. Suitable electric turnout mechanisms: Above baseboard: 32418. Below baseboard: 10030. Turnout frog can be polarised if used with below baseboard mechanism.
On order, shipped within 10-15 days
Turnout, right hand, with metal turnout frog. Without turnout mechanism. Length of the straight track 134.4 mm (standard length), branch angle 15°, branch radius 493 mm. Gauge: 9 mm. Suitable electric turnout mechanisms: Above baseboard: 32419. Below baseboard: 10030. Turnout frog can be polarised if used with below baseboard mechanism.
On order, shipped within 10-15 days
H0e metal rail joiners. Content: 50 pieces/pack.
On order, shipped within 10-15 days
Electric turnout mechanism right, suitable for all H0e/TT turnouts. Double spool motor with shut-off mechanism. Can be used as replacement as well as for later upgrading of manual or under-baseboard turnouts.
On order, shipped within 10-15 days
Set of two flatbed wagons.
On order, shipped within 10-15 days
Electrically operated turntable and switchable track exits with turntable switch art. no. 6910. The basic equipment for the turntable includes 6 exit tracks. The exit tracks can be attached and reattached at an angle of 15° as required, and can be extended to a total of 24 track connections. The power feed is activated within the turning bridge. The power to the track exit with which the turntable is lined up, either left or right, can be fed with power using the switch 6910. All other track exits remain isolated (even those opposite each other). With a revolving platform length of 183 mm. Suitable for locomotives with a wheel base length up to a 170 mm. Installation dimensions: Installation diameter: 203 mm Installation depth: approx. 25 mm Exterior diameter: 257 mm Note: By simply replacing the rail connectors installed as standard with 4081722 transition rail connectors, you can adapt the turntable and the 35901 supplementary set to the ROCO TT track system with 1.8 mm high rail profiles.
On order, shipped within 10-15 days
Complementary set for the TT-turntable 35900. The set consists of 3 ascent/descent tracks. A maximum of 24 tracks can be connected to the turntable. Note: By simply replacing the rail connectors installed as standard with 4081722 transition rail connectors, you can adapt the turntable and the 35901 supplementary set to the ROCO TT track system with 1.8 mm high rail profiles.
On order, shipped within 10-15 days
Compact design
Pre-order, release expected in Q4 2027
Stop blocks/brake shoes, yellow. For clipping onto the rail. Content: 12 pieces/package.
On order, shipped within 10-15 days