Track
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model For train-controlled triggering of automatic functions, contact reliability thanks to a double-contact system. The switching operation is triggered only by at least two metal wheels electrically connected to each other, not by individual wheels or plastic wheels. Minitrix contact track with a length of 50 mm (corresponds to 14907). The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
On order, shipped within 10-15 days
Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model For switching signals, points, etc. Max. switching current 1 A, the function is triggered by the Märklin 7556 magnet. Minitrix contact track with magnetic switch with a length of 50 mm (corresponding to track 14907). The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling
On order, shipped within 10-15 days
Model Contents: 3 straight tracks 62188, 5 straight tracks 62172, 2 curved tracks 62224, 1 point 62611, 1 point 62612 and assembly instructions. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Note For extending the small C track starter set with a passing loop.
On order, shipped within 10-15 days
Model Contents: 7 straight tracks 62188, 7 straight tracks 62172, 2 curved tracks 62130, 1 curved point 62671, 1 curved point 62672 and assembly instructions. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Note For extending the C track starter sets with a passing loop with a curved point.
On order, shipped within 10-15 days
Model With the Minitrix 66519 connection terminal (1-pole) you ensure a flexible and reliable power supply for your N gauge layout. Whether for isolating points, switched-off sections or areas that are hard to reach – the compact terminal provides a reliable track power connection exactly where you need it. Highlights 1-pole connection terminal for the Minitrix N track system (N gauge, 1:160) Simple mounting directly on the track – also ideal in the hidden area of the layout Flexible use for signal isolating sections, block protection or switched-off tracks Robust and compact design for durable, operationally reliable connections Perfect for retrofitting or extending existing track power circuits Note Minitrix connection terminals and contacts allow the track power feeder wires to be connected conveniently (e.g. at signal isolating sections, switched-off tracks, block protection, etc.) at any point on the track layout, even in the middle of complicated point work.
On order, shipped within 10-15 days
2-pole with a twin wire for the track power connection. Suitable as a mechanical connection between track sections with the 14901 flexible track.
On order, shipped within 10-15 days
For an additional contact-reliable connection of loosely laid tracks. 40 pieces/pack.
Content: 40 pc. (CHF 0.38 / 1 pc.)
On order, shipped within 10-15 days
Model Traverser for recessed installation. Base plate with 2 approach tracks and 6 sidings. Track connections for Minitrix track. Traverser deck with a motor drive in the machinery house for forwards and reverse travel. A new controller for remote control is included. Dimensions: external dimensions: 220 x 300 mm. Base plate cutout: 205 x 285 mm. Maximum installation depth: 36 mm. Note The traverser can alternatively be controlled with an m 84 decoder by means of Märklin Digital. The connection of the traverser is described in the instructions.
On order, shipped within 10-15 days
Note Minitrix connection clamps and contacts allow the power feed cables to be connected conveniently (for example at signal isolating sections, isolating tracks, block protection sections, etc.) at any point on the track layout, even in the middle of complicated point work.
On order, shipped within 10-15 days
For insulated gaps between two tracks. They are exchanged for the metal fishplates. 10 pieces/pack.
Content: 10 pc. (CHF 0.39 / 1 pc.)
On order, shipped within 10-15 days
Prototype Turntable of the standard design with a bridge length of 21 metres. One example is still preserved today in Tuttlingen. Model The model is designed for recessed installation in the layout baseboard. 8 track connections around the rim. It can be extended to as many as 24 track connections with the 66571 plug-on rim segments. Richly detailed features and a prototypical colour scheme. The turntable bridge is remote-controlled with the matching controller included in the contents supplied. Driven by a powerful electric motor. All tracks that are not in contact with the turntable bridge are switched off automatically. Outside diameter of the turntable 170 mm. Diameter of the installation opening in the baseboard 145 mm. Installation depth approximately 30 mm when the cables are connected directly, approximately 50 mm when plugs are used. Length of the turntable bridge 132 mm, i.e. steam locomotives with a wheelbase including the wheel flange (not "length over the buffers"!) of up to 130 mm can be turned (a class 44, for example).
Pre-order, release expected in 2027
Prototype 8 track connection rim segments to be plugged onto the rim of the turntable. With 2 extension sets the turntable can be expanded to as many as 24 track connections. Colour-matched to the 66570 turntable.
On order, shipped within 10-15 days
Prototype DB standard design, 23 m. Suitable for conventional and digital operation. Remote-controlled turntable bridge with a built-in motor. Digital control exclusively with the Mobile Station 2 and the Central Station 2 and 3 (not included). Particularly convenient control with the Central Station 2 and 3 by means of track pre-selection (after the update has been carried out), or with various digital central units using the DCC digital format. Function: turning right/left. Pit for recessed installation in the layout. 6 track connections for C tracks, for fitting at any position. Exit angle in the 12° C track grid. Can be expanded to a maximum of 30 track connections in a 12° grid with the 66871 extension. Polarity changeover programmable. Outside diameter with one exit opposite another 378 mm. Diameter of the pit without exit tracks 278 mm. Bridge length 263 mm. Suitable for the 72886 roundhouse. Various sound functions that can be controlled. Turntable operator's cabin and outside lamp lit with LEDs, can be controlled. Model The Trix C track is the ideal track for quickly setting up a track arrangement on the table or on the floor. The low-resistance click connections of the rail ends are particularly reliable in contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. This brings flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any expansion you use the elegant ballasted track, and for the transitions to the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and these are practically all of the models newly offered by the various manufacturers in the last two decades for the two-rail supply system! The track thus contributes directly to the important compatibility of this H0 area. Highlights New tooling Sound Operator's cabin with LED lighting
On order, shipped within 10-15 days
3 track connections for C tracks. For fitting at any position. Built-in running current contacts. Length 57.5 mm. The Trix C track is the ideal track for quickly setting up a track arrangement on the table or on the floor. The low-resistance click connections of the rail ends are particularly reliable in contact and conductivity. The connections are mechanically very precisely designed and give the assembled track sections a high degree of inherent stability. The running and operating current for the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. This brings flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: for any expansion you use the elegant ballasted track, and for the transitions to the existing areas you use the transition track (62951), which mediates between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and these are practically all of the models newly offered by the various manufacturers in the last two decades for the two-rail supply system! The track thus contributes directly to the important compatibility of this H0 area.
Pre-order, release expected in December 2026
2 additional weights made of brass for rail vehicles to provide better traction on the rails. Dimensions: 26 g - L 2.67 x W 1.17 x H 1.35 cm, 35 g - L 4.18 x W 1.17 x H 1.12 cm.
On order, lead time to be confirmed
Replacement pickup shoe for ROBEL 3 rail versions.
On order, lead time to be confirmed
Patented replacement pickup shoe for items 2625 and 2627 cement mixer 3 rail version.
On order, lead time to be confirmed
Patented replacement pickup shoe low side car with drive unit 3 rail version items 2311 and 2316.
On order, lead time to be confirmed
The patented flat drive unit, similar to the one used in the ROBEL, is a perfect fit for the flat construction of this waggon. Between 1958 and 1967 the DB purchased more than 14 200 2-axle platform waggons with tiltable side and end boards. They serve for transporting vehicles and large volume freight. As from 1965 the vehicles without side stakes were classified as Kls. The models are suitable for epochs III – VI. Length over buffers: 13 860 mm. Empty weight: 12 100 kg, max. load 27,5 t. With its fine-tuned movement and sound, digital or analogue, this model can fulfil the wishes of many enthusiasts. A sound module providing different sounds and noises is included, and is configurable for a typical diesel- or steam locomotive. RailCom capable digital decoder for DCC/MM and analogue operation, with integrated power-pack for supplying the locomotive while driving over turnouts or tracks with poor electrical contact. Socket for rear lights or other switchable functions are available at both ends. Functions in analogue mode: - Driving forward/reverse, sound active (type and volume configurable via CVs) - Light outputs active Functions in digital mode: - Driving forward/reverse - Functions can be separately switched: Sound (type and volume configurable via CVs), signal horn, lights Sockets for NEM 362 couplers available at both ends. One rear light included. Dimensions: Lob 15,9 x W 3,5 x H 2 cm.
On order, lead time to be confirmed
The patented flat drive unit, similar to the one used in the ROBEL, is a perfect fit for the flat construction of this waggon. Between 1958 and 1967 the DB purchased more than 14 200 2-axle platform waggons with tiltable side and end boards. They serve for transporting vehicles and large volume freight. As from 1965 the vehicles without side stakes were classified as Kls. The models are suitable for epochs III – VI. Length over buffers: 13 860 mm. Empty weight: 12 100 kg, max. load 27,5 t. With its fine-tuned movement and sound, digital or analogue, this model can fulfil the wishes of many enthusiasts. A sound module providing different sounds and noises is included, and is configurable for a typical diesel- or steam locomotive. RailCom capable digital decoder for DCC/MM and analogue operation, with integrated power-pack for supplying the locomotive while driving over turnouts or tracks with poor electrical contact. Socket for rear lights or other switchable functions are available at both ends. Functions in analogue mode: - Driving forward/reverse, sound active (type and volume configurable via CVs) - Light outputs active Functions in digital mode: - Driving forward/reverse - Functions can be separately switched: Sound (type and volume configurable via CVs), signal horn, lights Sockets for NEM 362 couplers available at both ends. One rear light included. With patented pick up shoe. Dimensions: Lob 15,9 x W 3,5 x H 2 cm.
On order, lead time to be confirmed
The patented flat drive unit, similar to the one used in the ROBEL, is a perfect fit for the flat construction of this waggon. Between 1958 and 1967 the DB purchased more than 14 200 2-axle platform waggons with tiltable side and end boards. They serve for transporting vehicles and large volume freight. As from 1965 the vehicles without side stakes were classified as Kls. The models are suitable for epochs III – VI. Length over buffers: 13 860 mm. Empty weight: 12 100 kg, max. load 27,5 t.With its fine-tuned movement and sound, digital or analogue, this model can fulfil the wishes of many enthusiasts. A sound module providing different sounds and noises is included, and is configurable for a typical diesel- or steam locomotive. RailCom capable digital decoder for DCC/MM and analogue operation, with integrated power-pack for supplying the locomotive while driving over turnouts or tracks with poor electrical contact. Socket for rear lights or other switchable functions are available at both ends. Functions in analogue mode: - Driving forward/reverse, sound active (type and volume configurable via CVs) - Light outputs active Functions in digital mode: - Driving forward/reverse - Functions can be separately switched: Sound (type and volume configurable via CVs), signal horn, lights Sockets for NEM 362 couplers available at both ends. One rear light included. Dimensions: Lob 15,9 x W 3,5 x H 2 cm.
On order, lead time to be confirmed
The patented flat drive unit, similar to the one used in the ROBEL, is a perfect fit for the flat construction of this waggon. Between 1958 and 1967 the DB purchased more than 14 200 2-axle platform waggons with tiltable side and end boards. They serve for transporting vehicles and large volume freight. As from 1965 the vehicles without side stakes were classified as Kls. The models are suitable for epochs III – VI. Length over buffers: 13 860 mm. Empty weight: 12 100 kg, max. load 27,5 t. With its fine-tuned movement and sound, digital or analogue, this model can fulfil the wishes of many enthusiasts. A sound module providing different sounds and noises is included, and is configurable for a typical diesel- or steam locomotive. RailCom capable digital decoder for DCC/MM and analogue operation, with integrated power-pack for supplying the locomotive while driving over turnouts or tracks with poor electrical contact. Socket for rear lights or other switchable functions are available at both ends. Functions in analogue mode: - Driving forward/reverse, sound active (type and volume configurable via CVs) - Light outputs active Functions in digital mode: - Driving forward/reverse - Functions can be separately switched: Sound (type and volume configurable via CVs), signal horn, lights Sockets for NEM 362 couplers available at both ends. One rear light included. With patented pick up shoe. Dimensions: Lob 15,9 x W 3,5 x H 2 cm.
On order, lead time to be confirmed
The train rear lighting is suitable for low side cars items 2310, 2311 and the UNIMOG with low side car item 2680.
On order, lead time to be confirmed
Functional model for 2 rail version. The ROBEL track motor car with underfloor drive unit is a sophisticated piece of working equipment, which - due to its considerable pulling power - may well be used for transfer runs to remote rail customers. By proceed at reduced speed, operation with sound, analogue and digital ROBEL sophisticates. Universally applicable and a must have on your layout. The crane arm is without function. The working base is changeable with the crane hook. With electrical drive unit, directional headlights 3 white headlights resp. red tail lights, yellow warning light and white cab lighting. The integrated sound module generating various operating sounds, horn and compressor can be activated via digital functions. Pivoting coupler pockets as per NEM 362 at both ends. Load compensation in running mode (digital), prototypical maximum speed even in analogue mode due to automatic adaptation to excessive supply voltage, - supporting RailCom datagram command confirmations, CV content, address broadcast. With close-coupling kinematics and attached coupler. Dimensions: Lob 13,4 x W 3,6 x H 4,8 cm.
On order, lead time to be confirmed