Track Accessories
Radius of curvature 424.6 mm. Only for plastic track (standard circle II). 3 clips for fastening the track. Length and radius as for the 2231 track.
In stock, shipped within 1-3 days
Set of sleeper end pieces for flex track 61106. Used to equalise differences in length of the flex track 61106. Content: 6 end pieces, 12 rail joiners, 1 universal tool.
In stock, shipped within 1-3 days
Retrofit set for C track points. Twin-coil motor with end shut-off. Operation possible by means of the 72752 point control panel with feedback or the point built-in decoder 1. On points the electric motor can be installed and connected afterwards quite easily without special tools. The motor sits concealed in the ballast bed. Below-baseboard mounting is not required. It is encapsulated to protect it from dirt and is protected against overloading by end shut-off. Control is by means of the 72752 point control panel. The manual operating lever can remain functional.
In stock, shipped within 1-3 days
With recesses for hooking in the cross connections 8924 and 8925. Base 7 x 13 mm. Height 61 mm.
In stock, shipped within 1-3 days
Model Lattice mast and bracket arm made of metal. Base with a click connection. Additional mast holder to match the Märklin bridge system. Height 100 mm. Pack of 5 pieces. Note The masts of the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is fitted into the matching base for C track or K track by means of a click connection.
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Model For retrofitting 2 C track points. Suitable for right-hand and left-hand points or a three-way point. Can be used with a manual switch lever and/or with the 74491 electric point motor. Lighting with maintenance-free LEDs. Note Point lanterns with LED lighting. All C track points, with a manual switch lever or an electric point motor, controlled conventionally or digitally, can be fitted with illuminated point lanterns. The installation is simple, and the lighting insert also fits the fixed lantern of the double slip point. Maintenance-free miniature LEDs make the true-to-scale size of the lanterns possible. Note: A fixed lantern with prototypical lighting is already installed in the 24624 double slip point.
In stock, shipped within 1-3 days
1 right-hand and 1 left-hand point lantern each, for mounting on points with a plug-in point motor. Can be used with a manual lever, the 75491 point motor or the 7548 below-baseboard motor. Lighting with maintenance-free LEDs.
In stock, shipped within 1-3 days
Contents: 300 g Modelling quartz sand. Particularly fine-grained and absolutely dust-free. With the four basic colours (natural white, beige, brown and dark grey, 7521-7524) all natural earth and ground colours can be mixed. The various types of sand are easy to use: brush the section of terrain with white glue (No. 7599) and then sprinkle it with Busch sand. Ideal for obtaining natural-looking transitions between road and meadow, track ballast and grass, etc.
In stock, shipped within 1-3 days
For holding plastic or metal track. 3 clips for fastening the K tracks. Length 180 mm.
In stock, shipped within 1-3 days
Buffer stop (construction kit). Optionally with wood plank or bumpers. For all gauge H0 track systems. Content: 1 piece.
In stock, shipped within 1-3 days
Tower mast with an additional support and 2 fitted metal bracket arms. Both bracket arms are electrically isolated. The outer bracket arm is adjustable up to 117.5 mm. Height 150 mm.
In stock: 5 on the shelf, shipped within 1-3 days
Model Lattice mast made of metal. Base with a mounting screw and click connection. Suitable for a cross span assembly or single bracket arms. Mounting points on all 4 sides. Can be used with all track systems. Height 170 mm. Pack of 1 piece. Note An additional holder for bracket arms is required to mount a single bracket arm (item no. 72070).
In stock: 5 on the shelf, shipped within 1-3 days
Radius 360 mm. 30° curve. Width 64 mm. For holding curved C tracks with radius R1. 1 ramp section corresponds to the 24130 track.
In stock: 5 on the shelf, shipped within 1-3 days
Unterführung für jedermann! Auch Straßen und Wege führen durch Tunnel und Unterführungen. Die Unterführung eignet sich daher ideal, um Straßen- und Fahrradunterführungen auf der Modelleisenbahn zu erbauen. Die Unterführung in der Spurweite H0 (Maßstab 1:87) ist kinderleicht in der Verarbeitung. Das Fertigmodell aus Struktur-Hartschaum kann einfach aus der Verpackung entnommen, ggf. noch mit Patina-Pulver gealtert und in die Landschaft eingebaut werden. So einfach und schnell war das Erbauen einer Straßenunterführung noch nie! Hinweis: Kombinieren Sie die Bruchstein-Viadukte in Ihrer Modell-Landschaft mit Mauern oder Tunneln der NOCH Hartschaum-Serie "Bruchsteinmauer". Die Steine der Mauerplatten und Tunnelportale passen ideal zur Struktur der Bruchstein-Viadukte. Da unsere Hartschaumartikel alle handbemalt werden, sind Farbabweichungen möglich.
In stock: 5 on the shelf, shipped within 1-3 days
Six assembled and painted traffic barriers in N scale. Each barrier has a frame with rounded ends, vertical bars, two folded sheet-metal feet and side hooks that allow the barriers to be linked together. Three of the six carry a plain rectangular sign panel in the middle of the frame; the other three do not.
In stock: 5 on the shelf, shipped within 1-3 days
Silver-finished metal drums in N scale, supplied painted. The cylindrical body carries rolling ribs, top and bottom are closed, and bungs can be seen on some lids. The drums are used loose, as a load or to detail a storage area.
In stock: 5 on the shelf, shipped within 1-3 days
Ten pallets in N scale in a light wood tone. The deck is moulded as individual boards, open above and below. Raised lettering is moulded on the side rail. The pallets are separate, loose pieces.
In stock: 5 on the shelf, shipped within 1-3 days
Six wooden barrels and six wooden crates in N scale, supplied painted. The barrels are bulged, with clearly moulded staves and hoops in dark brown; the crates are closed, light beige, with a horizontal plank texture. The set is used as a load or to dress a loading dock or storage area.
In stock: 5 on the shelf, shipped within 1-3 days
Six beer kegs and six red bottle crates in N scale, supplied painted. The kegs are silver-finished with ribbed bodies and domed tops; the crates are red, with moulded recessed handles on the sides and closely packed brown bottle necks. The parts serve as a load or to dress a loading dock or backyard.
In stock: 5 on the shelf, shipped within 1-3 days
Six beer kegs and six green bottle crates in N scale, supplied painted. The kegs are silver-finished with ribbed bodies and domed tops; the crates are green, with moulded recessed handles on the sides and closely packed light green bottle necks. The parts serve as a load or to dress a loading dock or backyard.
In stock: 5 on the shelf, shipped within 1-3 days
Sacks in N scale, moulded in a uniform ivory shade. Each sack is bulged at the base and narrows at the top into a tied neck; the surface is slightly grainy and carries no lettering. In the photograph the sacks are grouped in heaps; they are used as a load or to dress a loading dock or store.
In stock: 5 on the shelf, shipped within 1-3 days
Gas cylinders in N scale, supplied painted. The body is slender and cylindrical with a rounded shoulder, the neck and valve picked out in silver. The cylinders come in four colours: yellow, white, black and red. They can be placed upright or lying down, as a load or to detail a workshop or storage area.
In stock: 5 on the shelf, shipped within 1-3 days
Five concrete Jersey barriers in N scale, with the classic profile: wide base, sloping flank and vertical upper part. The surface is matt and slightly grainy in a greyish white imitating bare concrete, and the base is pierced with lifting recesses. The elements are not all the same length, four long and one distinctly shorter, and butt together end to end.
In stock: 5 on the shelf, shipped within 1-3 days
Six plastic Jersey barriers in N scale, three red and three white. The surface is smooth and glossy; a recess is moulded in the middle of the top and openings appear at the foot of the flanks. All six elements are the same length and line up end to end to form a barrier run.
In stock: 5 on the shelf, shipped within 1-3 days