Track Accessories
Arched bridge. The ROCO bridges are delivered in kits. They can be clipped together in minutes without using adhesives. Length: 457 mm, Width: 75 mm. Headroom: 96 mm.
On order, shipped within 10-15 days
Bridge pillars. Suitable for bridges 40080 and 40081. Height 94 mm.
On order, shipped within 10-15 days
Illuminated turnout lantern, to match general purpose below baseboard propulsionmechanism 10030 (optionally DB or SBB) and coupled 90° rotation.
On order, shipped within 10-15 days
Electric turnout mechanism left for ROCO LINE turnouts without roadbed.
On order, shipped within 10-15 days
Electric turnout mechanism right for ROCO LINE turnouts without roadbed.
On order, shipped within 10-15 days
Manual turnout mechanism right for ROCO LINE turnouts without roadbed.
On order, shipped within 10-15 days
Buffer stop with wood plank (construction kit). Contents: 2 pieces.
On order, shipped within 10-15 days
Flexible toothed racks for ROCO LINE tracks. Track length: each 230 mm. Flexible installation in straight and curved tracks Can be used from radius 2 (r= 358 mm) Content: 4 toothed rack elements 24 fastening chairs Fastening nails
On order, shipped within 10-15 days
Buffer stop (construction kit). Prototypical stable construction for all Gauge H0 track systems. Including 2 brake shoes to clip onto the rail. Content: 1 piece
On order, shipped within 10-15 days
DC track connections for turntable 42615. Content: 4 units 2L = track connections, suitable for turntable 42615.
On order, shipped within 10-15 days
AC track connectinos for turntable 42615. 3 units 3L ~ track connections, suitable for turntable 42615.
On order, shipped within 10-15 days
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (the version from production year 2019 on is compatible with RailCom) and can be programmed after installation. RailCom is a registered trademark of the Lenz GmbH, Gießen.
On order, shipped within 10-15 days
Substitute embankment slopes. The package contains 6 pieces, each with a length of 360 mm.
On order, lead time to be confirmed
Ballast board to fill in the spaces between the tracks in the train station area. Colour and grain size match the bedding track. 3 pieces/pack. Size 345 x 93 mm.
On order, shipped within 10-15 days
Electrically operated turntable, with electrically switchable track exits using the turntable control switch 6910. Length of the turning bridge: 310 mm. The turntable is prototypically mounted in a recess and fitted with accurate details. As delivered, there are 6 exit tracks and 4 over-run ends. The exit tracks can be unclipped and repositioned as desired, or extended using the turntable extension set 6153 right up to the complete 48 exits. The “thinking” turntable: using the switch 6910, will determine the rotation direction in order to access the desired exit. The power feed is activated within the turning bridge. The power to the track exit with which the turntable is lined up, either left or right, can be fed with power using the switch 6910. All other track exits remain isolated (even those opposite each other).A maximum of 48 track exits can be controlled and electrically operated without the need for any additional wiring. Note: Control your turntables easily – with TURN-CONTROL, the electronic turntable control device (item No. 6915).
On order, shipped within 10-15 days
Extension set for the PROFI-track turntable 6152 for 2-rail operation with nickel silver tracks.
On order, shipped within 10-15 days
Ballast mix 500 g
On order, lead time to be confirmed
Right-hand point motors
On order, lead time to be confirmed
Left point motors
On order, lead time to be confirmed
Model Traverser for recessed installation. Base plate with 2 approach tracks and 6 sidings. Track connections for Minitrix track. Traverser deck with a motor drive in the machinery house for forwards and reverse travel. A new controller for remote control is included. Dimensions: external dimensions: 220 x 300 mm. Base plate cutout: 205 x 285 mm. Maximum installation depth: 36 mm. Note The traverser can alternatively be controlled with an m 84 decoder by means of Märklin Digital. The connection of the traverser is described in the instructions.
On order, shipped within 10-15 days
Prototype Turntable of the standard design with a bridge length of 21 metres. One example is still preserved today in Tuttlingen. Model The model is designed for recessed installation in the layout baseboard. 8 track connections around the rim. It can be extended to as many as 24 track connections with the 66571 plug-on rim segments. Richly detailed features and a prototypical colour scheme. The turntable bridge is remote-controlled with the matching controller included in the contents supplied. Driven by a powerful electric motor. All tracks that are not in contact with the turntable bridge are switched off automatically. Outside diameter of the turntable 170 mm. Diameter of the installation opening in the baseboard 145 mm. Installation depth approximately 30 mm when the cables are connected directly, approximately 50 mm when plugs are used. Length of the turntable bridge 132 mm, i.e. steam locomotives with a wheelbase including the wheel flange (not "length over the buffers"!) of up to 130 mm can be turned (a class 44, for example).
Pre-order, release expected in 2027
Prototype 8 track connection rim segments to be plugged onto the rim of the turntable. With 2 extension sets the turntable can be expanded to as many as 24 track connections. Colour-matched to the 66570 turntable.
On order, shipped within 10-15 days
2 additional weights made of brass for rail vehicles to provide better traction on the rails. Dimensions: 26 g - L 2.67 x W 1.17 x H 1.35 cm, 35 g - L 4.18 x W 1.17 x H 1.12 cm.
On order, lead time to be confirmed
Replacement pickup shoe for ROBEL 3 rail versions.
On order, lead time to be confirmed