Accessories
Pack x 10 H0 Scale Magnetic Couplers NEM 362. H0 scale (1:87). Minimum radius 356.5 mm.
On order, shipped within 4-5 days
Pack of 10 H0 scale (1:87) magnetic couplers, NEM 363.
On order, shipped within 4-5 days
Z21 START newGen Basic Digital Set. The Z21 START newGen is an entry-level control unit offered at a particularly attractive price. Get started with the Z21 START newGen and a terminal device of your choice: Z21 APP, Z21 multiMAUS or Z21 WLANMAUS. Our other Z21 products are available for expanding your system – get started wirelessly straight away. The app is available for iOS devices in the App Store and for Android devices in the Google Play Store. Features: With built-in Wi-Fi, setting it up and connecting is a breeze! Controls up to 9,999 locomotive decoders Controls up to 100 locomotives simultaneously Controls up to 2,048 turnout decoders Software updates via the new Z21 Suite (further information to follow) Connections: X-BUS USB-C Technical details: Input voltage: 18–24 V Output voltage corresponds to 1 V below input voltage Output current: max. 3 A Analogue locomotives: Not controllable Maximum number of trains: 100 vehicles simultaneously DCC locomotive decoders 14/28/128 speed steps F0 to F31 Read & write POM Main track and programming track are on a single output on the Z21 START newGen, as is familiar from the Z21 START. Contents: 1 Z21 START newGen digital control unit 1 plug-in power supply RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
Pre-order, ships on release
Z21 Professional Digital Set with Z21 WLANMAUS newGen. The Z21 digital control centre connects your model railway layout, your digital locomotives and your carriages via Wi-Fi to your tablet, smartphone or the Z21 WLANMAUS newGen. No additional networking knowledge is required for this. You can easily expand your Z21 digital control centre thanks to the wide range of interfaces. This also makes it the ideal basis for PC-based automation. Contents: 1 Z21 digital control centre 1 Z21 WLANMAUS newGen 1 Wi-Fi router 1 mains adapter
On order, shipped within 10-15 days
ROCO Rubber. Track cleaning rubber; this special rubber is excellent for cleaning the rails of dirt and oilresidue; suitable for all gauges.
On order, lead time to be confirmed
Z21 WLANMAUS newGen. The successor to the popular Z21 WLANMAUS is here – now with even more ease of use! The Z21 WLANMAUS newGen is a digital controller with which you can control your trains, use digital functions, switch points and signals, programme and much more. It gives you freedom of movement around your layout.
On order, lead time to be confirmed
Change over button with feedback function for four magnetic items switched off at the end (turnouts, semaphore signal, relays, etc.). Further switches can be plugged into the side.
On order, shipped within 10-15 days
Single action button for uncoupling tracks. Use this unit wherever power must be supplied for a short time. The individual buttons are electrically insulated and thus they can operate different power circuits.
On order, shipped within 10-15 days
Change over button with feedback. Change over button with feedback for single-slip turnouts and symmetric three-way turnouts. These two turnout designs require – if properly controlled – connections for the four possible turnout positions. The switch 10526 offers a definite control of the three permissible turnout settings. Additional switches can be connected side-by-side.
On order, shipped within 10-15 days
5-pole connector. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
On order, shipped within 10-15 days
8-pole connector, e.g. for 10777. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
On order, shipped within 10-15 days
16-pole connector. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
On order, shipped within 10-15 days
3-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
5-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
8-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
Color: orange. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
Color: yellow. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
Color: green. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
Color: violet. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
Color: grey. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
DC/AC - power jack. This adapter enables the Z21 switch DECODER (10836) or the Z21 signal DECODER (10837) to be easily supplied with a switching power supply such as the 10851 or the 10850.
On order, shipped within 10-15 days
Highly flexible 6-pole spiral cable. Connection between Z21 multiMAUS (10835, 10810) and 10820, 10822, 10815, 10764. Suitable for the FLEISCHMANN multiMAUS from the digital Starter Sets.
On order, shipped within 10-15 days
4-pin data bus distributor module. To connect further input units (for example Lokmaus or Z21 multiMAUS). This distributor module can also be used as an extension of existing lines to units on the slave output. Note: The cable of the Master Lokmaus should not be extended in order to avoid impairing the quality of the data transmission.
On order, shipped within 10-15 days
Z21 multi LOOP The Z21 multi LOOP reverse loop module is ideal for the comfortable and safe operation of track layouts such as terminal loops, triangular junctions and turntables. Operation modes: short-circuit detection - easiest wiring sensor tracks - short circuit free detection switching contacts - detection via circuit tracks or reed contacts combined operation - double safety Compatible with DCC MM RailCom analogue mode Note on sensor tracks / sections! Since sensor tracks / sections are not themselves supplied with power, they must not be too long, especially with regard to short, slower locomotives. Ideally they should be between 4.0 and 5.5 cm long in H0 and 2.0 to 3.0 cm in N. RailCom is a registered trademark of the Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days