Accessories
Train controller and plug-in power supply. This controller set is best suited for beginners and running just one train. It consists of one controller and plug-in power supply, designed to compliment each other. The controller gives a definite forwards and backwards control and speed settings. The control knob clicks gently into a zero position. Automatic overload protection. Easy connection to the layout using the pressure connection clips. Technical data: Running voltage: 0–14 V=/0.6 A Separate accessory output: 14 V=/0.85 A Automatic overload protection Regulator with zero point setting
On order, shipped within 10-15 days
Z21 CAN HUB Additional 2 A power supply for CAN BUS 3 CAN outputs 1 Z-CAN output with booster signal amplification Ideal for large track layouts with many CAN users The package also contains a connecting cable for CAN bus
On order, shipped within 10-15 days
Z21 light BOOSTER Power 3 A (track output) RailCom cutout (allows use of RailCom-track occupied detector) Terminal loop feature with short-circuit detector Connection via B bus (ideal also for multiZENTRALEpro), replaces Booster 10765 Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 single BOOSTER Power 3 A (track output) Adjustable track voltage via Z21 (12–24 V) RailCom global detector (allows POM reading in the booster section) Configurable terminal loop feature with short-circuit detector Brake generator feature configurable Connections via CAN bus, B bus, CDE bus Configuration and update simply by PC via CAN Matching power supply: 10851 Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 dual BOOSTER Power 2x 3 A (track outputs) Voltage can be set for both track outputs separately via app or PC via Z21 (12–24 V) RailCom global detector (allows POM reading in the booster section) Terminal loop feature can be separately configured by means of short-circuit detector Brake generator feature can separately configured for both Connections via CAN bus, B bus, CDE bus Configuration and update simply by PC via CAN Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 DETECTOR Track-occupied detector for 8 sections Occupied message by means of power monitoring of track sections RailCom-detector for loco identification when using the CAN bus Connection via CAN bus or R bus Configuration via button or CAN Occupied/feedback with momentary contact Includes connection cable for R-Bus/CAN RailCom is a registered trademark of Lenz Elektronik GmbH.
On order, shipped within 10-15 days
z21 WLAN Package The z21 start can be extended to a network-enabled control center by using Access Point and an activation code. You can easily control both trains as well as turnouts with your Smartphone or tablet via the popular Z21 App. Self-explanatory control functions for your model railway layout (through icons, image integration etc.) You can automate routes Control your locomotives with photorealistic driver’s cabs for the ultimate driving experience – feel like a real locomotive driver It lays the basis for PC guided automations (e.g. with Rocrail®, iTrain®, TrainController® etc. Click HERE for more information! The z21 WLAN Package contains a preconfigured router and the activation code for the z21 start. This way the z21 start can accept commands for locomotives and turnouts via the WiFi interface and process them. Go here for your: Unlock code Info: system requirement is a Windows PC or notebook as well as an existing Internet connection (only for activation of the Unlock code). Please also note our video: Activation of the z21 start with the z21 WLAN package Contents: WiFi Router Switching power supply Unlock code Manual
On order, shipped within 10-15 days
Z21 DETECTOR x16 Track occupancy sensor for 16 track sections Occupied signal is triggered by the power monitoring of the track sections Connection via R-Bus Configuration via buttons or POM CV programming
On order, shipped within 10-15 days
The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go! Activation code not required! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply 10851 pre-configured WiFi router for Plug & Play operations incl. switching power supply 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shope as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go ! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply with NEMA connector pre-configured WiFi router for Plug and Play operations incl. switching power supply with NEMA connector 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shop as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 multiMAUS Economically priced operating device with many possibilities. Several Z21 multiMAUS devices can be operated on the system at the same time. Brightness-adjustable display. Up to 9,999 locomotive addresses can be operated with direct input; 64 can be stored in a data bank and labeled with names: for example 103RB (103 red-beige). Per locomotive up to 31 functions (including headlights) can be activated if the model has been equipped accordingly. The locomotives can alternatively be operated with 14, 28 and 128 driving levels; on the one hand, this can be set in principle, on the other hand, it can be changed as required for each locomotive. With two different ways of programming you can adjust your locomotive decoder according to your own wishes: The most important CV values from 1 to 5 are accessible with the button combination “MENU” and 1–5, the total of 1024 possible CV values can be addressed with the programming menu. Of course, depending on the decoder configuration, all values up to 255 can be programmed. Readout of CV 1 - 1024 possible in connection with Z21 or readout capable digital control centre. Turnout mode: The Z21 multiMAUS can switch up to 2,048 magnetic devices. These elements have to be equipped with an electric device and be connected to a magnetic device decoder. The programming of the magnetic device decoder is done electronically via the tracks. Supported data transfer protocol: X-Bus 4.0 Slave Firmware updateable Contents: Z21 multiMAUS Connection cable Manual
On order, shipped within 10-15 days
Z21 switch DECODER The Z21 switch DECODER is an universally applicable DCC switching decoder with a power output of 2 Amperes for up to 8 turnouts or up to 16 elements such as LEDs and bulbs. Simple connection A separate DC supply can be connected so that the control centre or booster outputs are not placed under unnecessary load. If the wiring should be as simple as possible, the rail signal can also be used as a supply. In addition, the outputs are protected against overload and short-circuits. Adjustable outputs Each of the 8 output pairs can be set to different modes independently of the other. These are already pre-configured and can simply be selected. Each output pair can also be individually dimmed so that lighting can be adapted precisely to requirements. It perfectly can be combined with twin coil motors simple light signals all kind of illumination the control of relays Highlights: 8 output pairs can be set independently Optional power supply via extra applied switching power supply Programmable with RailCom on the main track (POM) Short-circuit protection against overload Updateable Adjustable modes Standard operation - with configurable cut-in time for twin coil motors Instantaneous operation - for turnouts and uncouplers. Can be be activated with a manual controller depending on the operating time (see also 10775) Bistable continuous operation - Switching on or switching over of the lighting and signals Bistable continuous operation - Switching on or switching over with light bulb simulation Alternative flash Alternative flash with light bulb simulation Item numbers of switches 1-2040 RailCom is a registered trademark of the company Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Switching power supply 36 Watts Ideal for Z21 CAN HUB and z21 start. Protection against: Overload Short circuit Over-tension
On order, shipped within 10-15 days
Switching power supply 54 Watts. Ideal for Z21, z21, Z21 single BOOSTER, Z21 light BOOSTER. Protection against: Overload Short circuit Over-tension
On order, shipped within 10-15 days
Switching power supply 120 Watts. Ideal for Z21 dual BOOSTER and Z21 XL BOOSTER. Protection against: Overload Short circuit Over-tension Overtemperature
On order, shipped within 10-15 days
USB switching power supply 5 watts. With USB-A to Micro-USB-B cable. Ideal for Z21 pro LINK (item no.10838)
On order, shipped within 10-15 days
Z21 XL BOOSTER The Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. The advantages of the Z21 XL BOOSTER Output voltage 6 A at 20 V Track format DCC and Motorola B-BUS CAN-BUS CDE interface RailCom receiver and transmission to control centre (CAN) Forwarding of short-circuits to control centre (adjustable) Firmware update (CAN) RailCom cut-out, adjustable Motorola is a registered trade name of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 XL Series The new Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. In terms of the control centre scope of functions, the Z21 XL Series primarily differs from the Z21 through the track output with 6 Amperes of main track current. However, the rail voltage cannot be adjusted, and is dependent on the power supply unit used. In addition, the Z21 XL Series features a Z-CAN for a high number of Z21 XL boosters. The benefits at a glance More output voltage with 6 A at 20 V Control via WLAN provides high range and transmission security Convenient Z21 App and Z21 WLANMAUS for the control of your entire system Included: Z21 XL Series digital control centre Power supply unit and cable 6 A 20 V (10857) WLAN router & power supply unit
On order, shipped within 10-15 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.7 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
On order, shipped within 10-15 days
With this speaker set you can retrofit any sound. Complete set with sound box and connection cables. Ideally adapted to Zimo sound decoders. Dimensions: 10 x 15 x 9 mm Content: 2 pieces/package.
On order, shipped within 10-15 days
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Suitable for Gauge H0 and TT. Decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days