Accessories
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
On order, lead time to be confirmed
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
On order, lead time to be confirmed
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
On order, lead time to be confirmed
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
On order, lead time to be confirmed
Suitable for all Viessmann H0 tower masts. Maintenance free by LED lighting.
On order, lead time to be confirmed
Contents: Fuse holder, 2 fuses T 3, 15 A. Required for operation of a functional (current-carrying) catenary. For each transformer one fuse is sufficient.
On order, lead time to be confirmed
To shorten the universal catenary wires and for easy bending the fixing eyehooks.
On order, lead time to be confirmed
To shorten the universal catenary wires and for easy bending the fixing eyehooks.
On order, lead time to be confirmed
Consisting of 2 DPDT which operate when the servo drive reaches the final position. For feedback of position, frog polarization, or similar.
On order, lead time to be confirmed
Illuminated switchpoint light to be mounted on Märklin/Trix C-tracks. Maintenance free due to LED lighting. Lantern and switch are simultaneously switched over into the resp. correct position. Thus they show the switch position to the train driver. The prototypical and bright point position display strongly enhances the effect of both a set of points and a station ramp. Including one lamp housing each for right- and left branch line.
On order, lead time to be confirmed
Powerful and quiet unit with slow movement to set points and signals and more movable items. Suitable decoder is mounted as component inside the cable, so the drive is very compact. The drive is equipped with longitudinal and lateral adapters. Therefore, it can also be used for turnouts or for other purposes. Numerous adapters are attached permitting to drive a lot of common points from gauge N to 1. Max. movement range: 1 cm. Dimensions: L 5 x W 2,02 x H 0,58 cm.
On order, lead time to be confirmed
This switchpoint light can be mounted via its adapter onto the longitudinal output of the universal drive item 4560. The adapter itself provides a longitudinal output, so the full functionality of universal drive item 4560 is preserved. A white LED provides illumination, the connection is achieved via cables. The lantern turns together with the turnout when it is switched, indicating the direction to the train driver. The realistic and bright display of the directions of the turnouts enhances the image of any railway station or shunting yard. A casing for both right- and left-facing turnouts is included. Dimensions: L 2,9 x W 2 x H 0,53 cm.
On order, lead time to be confirmed
This special point machine is a powerful, silent drive with its respective digital decoder for installation in TT road bed points. The decoder is located in the cable making the driveparticularly compact. The point machine stands out for the prototypically slow movement of the point blades. Speed and motion are controlled electronically and ensure a sensitive drive. If – due to the characteristics of your turnout – the direction of the turnout does not fit with the switching direction of the command station, it is possible to set the point motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations. Analogue mode is possible. Additional switching outputs for a conventional feedback and frog polarisation complete the functions of the point machine. Their function is configurable. Tillig TT points (road bed point 15°): - 83816 right-hand turnout, manual (EW-re) - 83817 left-hand turnout, manual (EW-li) - 83818 right-hand turnout, with electric drive (EW-re) - 83819 left-hand turnout, with electric drive (EW-li) - 83820 right-hand turnout, with hand drive (BW-re) - 83821 left-hand turnout, with hand drive (BW-li) - 83861 similar flexure turnout type B, right-hand (BIBW-re) - 83862 similar flexure turnout type B, left-hand (BIBW-li) - 83863 similar flexure turnout type B, right-hand (BIBW-re) - 83864 similar flexure turnout type B, left-hand (BIBW-li)
On order, lead time to be confirmed
Powerful and quiet drive unit in flat design with slowly swinging drive plate, ideal for the opening and closing of doors. The included decoder is integrated as component inside the cable which makes the drive extra compact. It recognizes Märklin-Motorola and DCC format and is able to feedback required theoretical and actual position by RailCom to appropriate digital command station. End position, speed and motion characteristics are configurable in which the feedback control offers sensitive impulse. Operation with variable end position for pivoting angle is possible, too. Decoder can also be used in analogue mode and has an automatic diorama programme with random movements (diorama mode). Additional configurable outputs for relays control, which can switch small loads like LEDs directly, complete the functional range. The drive plate provides easy connection with doors, e. g. by glueing the movable parts. A figure can be mounted onto the movable drive plate which steps out lifelikely. Useable for gauges 0, H0 and TT. Dimensions: L ca. 5,5 x W 2,1 x H 0,53 cm.
On order, lead time to be confirmed
The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.
On order, lead time to be confirmed
The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.
On order, lead time to be confirmed
The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.
On order, lead time to be confirmed
The cylindrical plug bases have been specifically developed for connecting light signals from the former manufacturer Alphamodel (Németh Andor, Hungary) and are fully compatible with its proven plug-in system. Available in 6-pin and 13-pin versions, either with pre-soldered connection cables or without cables for custom wiring solutions. The versions with connection cables offer a decisive practical advantage: the delicate pins of the cylindrical plug bases are already professionally soldered.
On order, lead time to be confirmed
Suitable for road bed tracks Märklin C-track, Trix, Roco GEO-Line and Piko A-track. Compatible with all Viessmann H0 light signals with base socket. L 3.06 x W 2 x H 0.95 cm
On order, lead time to be confirmed
These couplers allow you to provide an easy power supply system for the entire train. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362 coupling shaft. The couplers are contact-proof and cannot be uncoupled automatically, yet easy to separate and to couple. The thin cables (0.6 mm) allow a very easy mounting. Current consumption: max. 750 mA. Contents: 3 pairs with 3 adapters each (S: norm, M: +0.3 mm and L: +0.6 mm).
On order, lead time to be confirmed
With this module the attached blue LED will flicker, so that it seems to be a real welding light. Realistic effect by integrated interval switch which interrupts the flickering automatically with breaks. Suitable for all kind of scales. Ideal to insert into depots, workshops, e. g. factory buildings. Maintenance free by LED lighting.
On order, lead time to be confirmed
Using campfire it is possible to create nice romantic twilight effects. To show an Easter fire or BBQ fire. Campfire is equipped with 2 yellow bulbs. Together with the blaze flickering electronics item 5021 you can connect up to 7 yellow bulbs and one red bulb. Dimensions: Ø 2,8 cm. Spare bulb: items 3501 (yellow) and 3502 (red).
On order, lead time to be confirmed
With base socket for easy mounting. Maintenance free by LED lighting. Light running time is adjustable with the electronics and 2 functions are switchable. Function A: Outputs are single switched step by step so only one lamp resp. LED is shining. Function B: Outputs are switched one after the other and then switched off all at once.
On order, lead time to be confirmed
The blinker electronics is used to equip the model vehicles with very realistic flashlights. Special blink switching, which is mounted under the layout, provides a deceptively real-looking impression of a rotating beam. Operation allowed with AC voltage only. Spare bulbs: item 3506 (2x blue), item 3507 (2x yellow), item 3508 (2x red) and item 3509 (2x clear).
On order, lead time to be confirmed