Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Accessories

Filter products
10% off the recommended price
SUSI distribution unit
Uhlenbrock 71100
SUSI distribution unit

SUSI distributor, 70 mm. This allows two sound modules to be connected to one decoder. The distributor can also be used as a connection extension.

Selling price: CHF 10.90 RRP CHF 12.20

On order, lead time to be confirmed

5 NEM 652 interface sockets
Uhlenbrock 71621
5 NEM 652 interface sockets

Item no. 71621 5 NEM 652 interface sockets

Selling price: CHF 9.30 RRP CHF 10.30

On order, lead time to be confirmed

5 NEM 652 interface plugs
Uhlenbrock 71651
5 NEM 652 interface plugs

Item no. 71651 5 interface plugs to NEM 652

Selling price: CHF 7.40 RRP CHF 8.20

On order, lead time to be confirmed

11% off the recommended price
PluX-22 connection board
Uhlenbrock 71680
PluX-22 connection board

Connection board for the retrofitting of PluX decoders (PluX 8 and PluX 22) in locomotives with a DC motor. With connection option for SUSI and LISSY.

Selling price: CHF 9.90 RRP CHF 11.20

On order, lead time to be confirmed

Energy buffer 1 x 1F
Uhlenbrock 71810
Energy buffer 1 x 1F

IntelliDrive 2 energy store 1 F. The IntelliDrive energy stores bridge power interruptions caused by dirty rails and long turnout sequences. This means there is no more jerky running on dirty rails or when passing over turnout sequences. The sound no longer has dropouts either. The energy store can be used with all common decoders that have decoder ground GND and U+ (+20 V) connections after the rectifier. The charging circuit is controlled by a microprocessor, so there is no overload of the booster when the layout is switched on. All parameters can be set by CV programming. The energy store should be given the same address as the locomotive decoder. The 71810 is intended for locomotives with low current consumption. Size 17.5 x 12.5 x 8.5 mm.

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 decoder, Next18
Uhlenbrock 73236
ID2 decoder, Next18

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73236 ID2 Decoder, Next18

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 N-TT decoder with lead wires
Uhlenbrock 73300
ID2 N-TT decoder with lead wires

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73300 Decoder, microSUSI, Multi, DC, control, cable

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 N-TT Decoder with leads, PluX 12
Uhlenbrock 73340
ID2 N-TT Decoder with leads, PluX 12

The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73340 Decoder, microSUSI, Multi, DC, control, PluX 12

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 minidecoder, lead wires
Uhlenbrock 73406
ID2 minidecoder, lead wires

The standard decoders for small gauges are the 73105 series. These decoders are available with connecting wires (73106), a 6-pin plug to NEM 651 (73115) and with a PluX12 interface (73145). This can be used, for example, to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73405 with connecting wires and 73415 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73406 Mini decoder, microSUSI, Multi, DC, control, cable

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

ID2 minidecoder, 6-pin NEM651
Uhlenbrock 73416
ID2 minidecoder, 6-pin NEM651

The standard decoders for small gauges are the 73105 series. These decoders are available with connecting wires (73105), a 6-pin plug to NEM 651 (73115) and with a PluX12 interface (73145). This can be used, for example, to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73405 with connecting wires and 73415 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73416 Mini decoder, microSUSI, Multi, DC, control, cable

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

10% off the recommended price
Mini function decoder
Uhlenbrock 73700
Mini function decoder

The functions: Six function outputs All outputs can be switched, flashed and dimmed depending on the direction of travel and on time Function mapping up to F44 On and off times for flashing outputs can each be set separately Second brightness level (dimming) switchable via function key Fade-in and fade-out outputs with adjustable fade time Adjustable neon lamp effect, energy-saving lamps, coupling control, PWM modulation programmable (e.g. Gyrolight, Marslight, etc.) RailCom Plus Data formats DCC and Motorola II Connection via cable + solder pads Programmable via CV (DCC) and via Motorola digital command station Load capacity up to 0.6 A, 0.6A per output Size 9.5 x 7.8 x 2.4 mm

Selling price: CHF 21.90 RRP CHF 24.50

On order, lead time to be confirmed

IntelliDrive 2 8-pin digital decoder
Uhlenbrock 74120
IntelliDrive 2 8-pin digital decoder

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

10% off the recommended price
IntelliDrive 2 8-pin digital decoder with mfx
Uhlenbrock 74125
IntelliDrive 2 8-pin digital decoder with mfx

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.

Selling price: CHF 31.90 RRP CHF 35.70

On order, lead time to be confirmed

IntelliDrive 2 PluX 16 digital decoder
Uhlenbrock 74150
IntelliDrive 2 PluX 16 digital decoder

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.

Selling price: CHF 27.90 RRP CHF 30.60

On order, lead time to be confirmed

10% off the recommended price
IntelliDrive 2 PluX 16 digital decoder with mfx
Uhlenbrock 74155
IntelliDrive 2 PluX 16 digital decoder with mfx

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with or without mfx®.

Selling price: CHF 31.90 RRP CHF 35.70

On order, lead time to be confirmed

10% off the recommended price
IntelliDrive 2 digital decoder, 8-pin, NEM 652
Uhlenbrock 74320
IntelliDrive 2 digital decoder, 8-pin, NEM 652

Item no. 74320 IntelliDrive 2 digital decoder, 8-pin, NEM 652

Selling price: CHF 21.90 RRP CHF 24.50

On order, lead time to be confirmed

10% off the recommended price
PluX22+Mfx digital decoder
Uhlenbrock 74570
PluX22+Mfx digital decoder

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.

Selling price: CHF 34.90 RRP CHF 38.80

On order, lead time to be confirmed

11% off the recommended price
IntelliDrive 2 21 MTC digital decoder with mfx
Uhlenbrock 75335
IntelliDrive 2 21 MTC digital decoder with mfx

In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with or without mfx®.

Selling price: CHF 29.90 RRP CHF 33.60

On order, lead time to be confirmed

Function decoder
Uhlenbrock 76800
Function decoder

The functions: Six function outputs All outputs can be switched, flashed and dimmed depending on the direction of travel and on time Function mapping up to F44 On and off times for flashing outputs can each be set separately Second brightness level (dimming) switchable via function key Fade-in and fade-out outputs with adjustable fade time Märklin analogue operation with change of direction of travel on the Function H0 Adjustable neon lamp effect, energy-saving lamps, coupling control, PWM modulation programmable (e.g. Gyrolight, Marslight, etc.) RailCom Plus Data formats DCC and Motorola II Connection via cable + solder pads Programmable via CV (DCC) and via Motorola digital command station Load capacity up to 0.6 A, 0.3A per output Size 20 x 12 x 2.2 mm

Selling price: CHF 17.90 RRP CHF 19.40

On order, lead time to be confirmed

Digital decoder, H0-IIIm, 3-rail, SUSI
Uhlenbrock 77200
Digital decoder, H0-IIIm, 3-rail, SUSI

The digital decoder is the brain of your locomotive. It determines the running characteristics and switching options. A poorly chosen decoder can quickly spoil your enjoyment of the vehicle. IntelliDrive decoders are at the peak of technology and guarantee you optimal running characteristics.

Selling price: CHF 45.90 RRP CHF 50.90

On order, lead time to be confirmed

10% off the recommended price
Decoder for Gauge 0-II m with expansion interface
Uhlenbrock 77300
Decoder for Gauge 0-II m with expansion interface

Based on the new IntelliDrive 2 digital decoders, with their outstanding features, and the robust 77500 decoder, we have developed the new 77300 and 77310 digital decoders.

Selling price: CHF 63.90 RRP CHF 71.20

On order, lead time to be confirmed

10% off the recommended price
Digital decoder, 0-11V, 5A, SUSI
Uhlenbrock 77500
Digital decoder, 0-11V, 5A, SUSI

The digital decoder is the brain of your locomotive. It determines the running characteristics and switching options. A poorly chosen decoder can quickly spoil your enjoyment of the vehicle. IntelliDrive decoders are at the forefront of technology and guarantee you optimal running characteristics.

Selling price: CHF 54.90 RRP CHF 61.20

On order, lead time to be confirmed

Uhlenbrock electronics building model
Uhlenbrock 80200
Uhlenbrock electronics building model

Control up to 20 LEDs for house lighting using our LED effect lighting (item no. 67400). Use the random generator to switch the LEDs on and off. Effects such as a flashing light circuit, a fluorescent lamp simulation or a flickering welding light can also be generated with the circuit.

Selling price: CHF 79.90 RRP CHF 88.70

On order, lead time to be confirmed

11% off the recommended price
Digital motor
Uhlenbrock 81210
Digital motor

The digital motor has no end stops and is therefore suitable for all continuous rotary movements.

Selling price: CHF 31.90 RRP CHF 35.90

On order, lead time to be confirmed