Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Accessories

Filter products
Interior lighting, pantographs, coaches, N / H0, 8 pieces
ESU 50707
Interior lighting, pantographs, coaches, N / H0, 8 pieces

LED lighting, current collector (Wheel contact) for waggons N / H0, 8-piece set, gauge: N, TT, H0 Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel flange). Since each set consists of two sprung contact strips one set per axle is enough. Suitable for any axle spacing. Suitable for H0 DC and AC or N gauge. Set with 8 current pick-up contacts sufficient for 8 axles. The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably prevents any flicker in case of poor contact. Despite the fact that it is more compact than its predecessor it has twice the capacity (0.22F/5.5V). Please note that the PowerPack 50710 is designed for use with the interiour light strips only. It can not be used to buffer decoders! Part No. Delivery 50710 LED lighting strip, PowerPack energy storage, 0,22F, double pack 50707 LED lighting, current collector (Wheel contact) for waggons N / H0, 8-piece set, gauge: N, TT, H0

Regular price: CHF 13.90

On order, shipped within 4-5 days

Interior Lighting PowerPack Energy Storage 0 22F 2-Piece Pack Gauge: N TT H0
ESU 50710
Interior Lighting PowerPack Energy Storage 0 22F 2-Piece Pack Gauge: N TT H0

LED lighting strip, PowerPack energy storage, 0,22F, double pack Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel flange). Since each set consists of two sprung contact strips one set per axle is enough. Suitable for any axle spacing. Suitable for H0 DC and AC or N gauge. Set with 8 current pick-up contacts sufficient for 8 axles. The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably prevents any flicker in case of poor contact. Despite the fact that it is more compact than its predecessor it has twice the capacity (0.22F/5.5V). Please note that the PowerPack 50710 is designed for use with the interiour light strips only. It can not be used to buffer decoders! Part No. Delivery 50710 LED lighting strip, PowerPack energy storage, 0,22F, double pack 50707 LED lighting, current collector (Wheel contact) for waggons N / H0, 8-piece set, gauge: N, TT, H0

Selling price: CHF 8.70 RRP CHF 8.90

On order, shipped within 4-5 days

Interior lighting set with decoder, entry and tail lights, 264mm, divisible, PowerPack option 13
ESU 50719
Interior lighting set with decoder, entry and tail lights, 264mm, divisible, PowerPack option 13

Interiour lighting set with decoder, Entry+Red marker light, 264mm, divisible, PowerPack Option, 13 LED, yellow With the digital LED interior lights from ESU, you can retrofit your N, TT or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit the desired location. The digital interior lights are 264mm long, 9mm slim and each fitted with 13 (!) LEDs. In addition to a version with warm white LEDs (50718), there is also a board with yellow LEDs (50719) so that the light color always matches your existing wagons. Features The digital interior lighting consists of a 74 mm long base section, on which a digital decoder and four LEDs are mounted, and eight adjoining sections, each equipped with one LED spaced 24mm apart. The additional sections can be cut off to customize the length to suit the wagon. Furthermore, two additional 4.5mm wide, detachable LED sections are provided on the far left and right sides to illuminate the entry area. The brightness of the LEDs can be set either using a potentiometer or via software CV and remains constant regardless of the track voltage thanks to the built-in constant voltage supply. A built-in buffer capacitor bridges small current interruptions ex works. To completely prevent flickering even with poor power pickup, a special, very compact PowerPack supercapacitor (ESU item no. 50710) can be connected directly upon request. This can power the LEDs for a few seconds. The digital interior lighting comes with a soldered red tail light. Operating modes The decoder, based on the LokPilot 5 Basic and adapted to the intended use, supports  the DCC and Märklin® Motorola® protocols. It can handle 2- and 4-digit addresses and can trigger functions up to F31. Thanks to RailComPlus®, the decoders register fully automatically with a suitable DCC command station. It supports all DCC programming modes, and thanks to RailCom®, the CV values ​​can be read on the main track with suitable command stations. Auxiliary registers are available for command stations that can only program CVs 1-255. Alternatively, the decoder can be read on the programming track without an additional load resistor. The digital interior lighting can also be used on analog AC and DC systems. In both operating modes, the direction of travel is correctly detected and the tail light is switched accordingly. Functions The 13 built-in LEDs can be individually controlled in a total of seven groups: The two entrance LEDs can each be switched separately. The tail light can also be switched separately depending on the direction of travel. Furthermore, there is an amplified output and two outputs for connecting additional LEDs (e.g., for headlights on Pilot cars or toilet lighting), which can be wired individually. Various prototypical lighting effects such as soft dimming, neon tube effects, defective neon tubes, battery lighting, and much more ensure a realistic result. The ESU V5 Function Mapping allows the individual assignment of all LED groups to the desired function keys. Robust You can rely on the experience and quality of a renowned brand manufacturer, even when it comes to digital interior lighting.

Selling price: CHF 28.90 RRP CHF 30.90

On order, shipped within 4-5 days

Servo drive with plastic gear. With microcontroller. 30 cm cable harness. Fixing material.
ESU 51804
Servo drive with plastic gear. With microcontroller. 30 cm cable harness. Fixing material.

Servo Motor, precision mini-servo, micro-controlled with plastic gearing, incl. mounting kit The Precision Servo Motor is a high-performance and noiseless actuator, introduced by ESU, suitable for the SwitchPilot decoders. It uses a highly-developed remote control (RC) technique and is perfectly suited for setting in motion all kinds of scenes on your layout. ESU has put all the experience gained with the previous servo motor into the new Precision version, which is better than other servo products, to offer a solution for all the demands of model railroaders. Applications The most important application regarding the Precision Servo Motor is to throw points. With the help of the Precision Servo Motor you are able to move your model railway switches like the original ones: the switch blade moves slowly and powerfully from one position to another. While doing this the Precision Servo motor works almost noiselessly due to the precision gearing made of long-lasting plastic. It is mere child´s play to motorize railway crossings via the Precision Servo motor and the SwitchPilot Servo. At last you can let the gates down at your keyboard in due time. Furthermore the Servo motor enables you to open and close the doors of your engine shed by remote control. Thanks to its new electronics the ESU Precision Servo Motor moves considerably smoother than other servos, as the ESU product has been optimized for slow motions. Mini servo The most important component of the Precision Servo Motor is a tiny, 9-gram-light mini servo which has been specially developed and optimized for all demands of a model railway layout. Despite its small dimensions of only 26 mm x 13 mm x 24 mm, it reaches a power of up to 1.0 kg/cm. Its cable length of 30cm (almost twice as long as cables of other standard servos on the market) allows for a longer distance between the servo motor and decoder. Beyond that, an electronic processor-controlled servo enables a precise heading for the required position without bucking - very important for garage doors. The closed current requirements of the electronics have been mottled compared to the previous servo motor which preserves the decoder. However, one of the most important improvements of the new Precision Servo Motor has to do with the switching-on: The well-known tremor when switching on the layout, which occurs with a lot of conventional RC-servos, is 100% choked during every operation mode. You will hear absolutely nothing from the servo when switching your layout on, no railway crossing will bounce. To make the application of the Servo motor as easy as possible, we include substantial accessories with delivery, which are especially adjusted to our customers´ needs: among some, diverse control horns, there is a special servo horn for a direct insert of the controlling wire. The controlling wire is, of course, included as well as the mounting screws. The most important accessory is a special servo holder: it enables you to install the Servo Motor either horizontally or vertically - depending on the application. Art.No. 51804 Servo Motor, precision mini-servo, micro-controlled with plastic gearing, incl. mounting kit

Selling price: CHF 17.90 RRP CHF 18.90

On order, shipped within 4-5 days

Linear servo with microcontroller 30cm cable mounting material
ESU 51806
Linear servo with microcontroller 30cm cable mounting material

Linear Servo, movement 4.5 mm, with microcontroller, 30cm wire,with fittings accessories This linear servo with dimensions 26mm x 22.5mm x 10.8mm is primarily intended for installation in electric locomotives in order to subsequently make the pantographs raised and lowered. The mechanics enable very quiet, smooth running and avoid the noise produced by commercially available servos. The servos radius of movement is approx. 4.5 mm. As is usual with ESU servos, the electronics have been optimized for use in model railway systems: the “start-up twitching” has been eliminated, as has the “humming” under load. The servo can be controlled either with LokSound 5 or LokPilot 5 decoders (both decoders generate the required control impulse) or alternatively used at your own discretion on a model railway system to switch switches or gates. In this case we recommend the SwitchPilot Servo for control.

Selling price: CHF 17.90 RRP CHF 18.90

On order, shipped within 4-5 days

SwitchPilot extension adapter set for ABC braking section, 2 pcs. for a total of 4 braking sections
ESU 51808
SwitchPilot extension adapter set for ABC braking section, 2 pcs. for a total of 4 braking sections

SwitchPilot Extension Adapter for ABC brake sections. Set of 2 for 4 brake sections These adaptor boards greatly simplify set-up and wiring of ABC braking sections. They are simply plugged into the terminals of a SwitchPilot Extension. Every adaptor board can generate the signals for two braking sectors and are wired as shown in the picture. ABC braking works reliably with all ESU V4 decoders (and others) and facilitates not just a prototypical slow down ahead of a red signal but also allows for triggering functions while waiting for the signal aspect to change. Any sound effects are also maintained.

Selling price: CHF 15.90 RRP CHF 16.90

On order, shipped within 4-5 days

SwitchPilot adapter set for signals with a common cathode, 2 pcs, with a total of 8 outputs. Cathode
ESU 51809
SwitchPilot adapter set for signals with a common cathode, 2 pcs, with a total of 8 outputs. Cathode

SwitchPilot Adapter for Signals with common cathode. Set of 2 for 8 Outputs Our SwitchPilot decoders cannot only control point mechanisms but also daylight signals. Most modern signals are equipped with LEDs. Usually the anode connections of multi-aspect signals are combined in order to reduce the number of wires. Some manufacturers (e.g.: Viessmann®) combine the cathodes and for that reason these signals could not be controlled with the SwitchPilot in the past. Our new adapter provides the solution. Simply plug the adapter into the output terminals of the SwitchPilot and you are ready to go.

Selling price: CHF 15.90 RRP CHF 16.90

On order, shipped within 4-5 days

3-pin servo extension cable with JR/Futaba plug to socket, 75 cm length
ESU 51810
3-pin servo extension cable with JR/Futaba plug to socket, 75 cm length

Servo Extension Cable, 3-pole J/R plug on socket J/R / Futaba, Length: 75cm With the Servo Extension Cable you are able to lengthen your Precision Servo Motor by up to 75cm. Art.No. 51810 Servo Extension Cable, 3-pole J/R plug on socket J/R / Futaba, Length: 75cm

Selling price: CHF 4.80 RRP CHF 4.90

On order, shipped within 4-5 days

SwitchPilot 3 4-fold DCC/MM OLED RC-Feedback
ESU 51830
SwitchPilot 3 4-fold DCC/MM OLED RC-Feedback

SwitchPilot 3, 4x accessory decoder, DCC/MM, OLED, with RC-Feedback, updatable SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 46.90 RRP CHF 49.90

On order, shipped within 4-5 days

SwitchPilot 3 Plus 8-fold DCC/MM OLED
ESU 51831
SwitchPilot 3 Plus 8-fold DCC/MM OLED

SwitchPilot 3 Plus, 8x accessory decoder, DCC/MM, OLED, updatable SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 75.90 RRP CHF 82.90

On order, shipped within 4-5 days

SwitchPilot 3 Mini 1-fold solenoid accessory decoder DCC/MM OLED updateable RETAIL packaged
ESU 51834
SwitchPilot 3 Mini 1-fold solenoid accessory decoder DCC/MM OLED updateable RETAIL packaged

SwitchPilot 3 Mini, 1x accessory decoder, DCC/MM, OLED, updatable The compact SwitchPilot 3 Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control a double-coil turnout motor, two magnetic uncouplers, a two-aspect signal, two incandescent bulbs, or other stationary loads. The SwitchPilot 3 Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons. Operating Modes The SwitchPilot 3 Mini is multi-protocol compatible and can be used with command stations based on the Märklin® Motorola® system (e.g., 6021, Central Station®, or Mobile Station®) as well as DCC-compatible control units. Configuration can be performed on either the main track or the programming track. Functions The SwitchPilot 3 Mini can be powered either directly from the digital system or from an external DC or AC power source. It has a total of two transistor outputs. The outputs (OutA and OutB) can be individually configured for the desired application: In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output switches off automatically once the time stored in the decoder has elapsed prevents solenoid drives from burning out. In momentary mode (K83-compatible), the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for accessories with limit switches or for uncoupling tracks. In bistable continuous mode (K84-compatible), the two outputs are switched on and off alternately: Pressing the first button (red) on the control panel switches on output Out A. It remains active until the corresponding button (green) activates output Out B. Out A and Out B behave like a changeover switch. In alternating flashing mode, outputs Out A and Out B are switched on alternately at an adjustable flashing frequency. The alternating flasher is started with the "Straight/Green" command of the assigned button and stopped with the "Round/Red" command. Optionally, the output can also be slowly faded in and out (so-called "zoom" for incandescent bulb simulation). Setup The SwitchPilot 3 Mini can be flexibly set up either on the programming track with DCC command stations or on the main track with POM ("Programming on Main"). It can also learn addresses directly via a programming button. The easiest way to set it up, however, is with the integrated OLED display and the three input buttons: All settings can be checked and changed directly on the decoder. "Programming" using your command station is not required. It really couldn't be simpler. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Mini are largely protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 30.90 RRP CHF 32.90

On order, lead time to be confirmed

SwitchPilot 3 Servo Mini 1-fold servo decoder DCC/MM OLED updateable RETAIL packaged
ESU 51835
SwitchPilot 3 Servo Mini 1-fold servo decoder DCC/MM OLED updateable RETAIL packaged

SwitchPilot 3 Servo Mini, 1x servo decoder, DCC/MM, OLED, updatable The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons. Operating Modes The SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with command stations based on the Märklin® Motorola® system (e.g., 6021, Central Station®, or Mobile Station®) as well as DCC-compatible control units. Configuration can be performed on both the main track and the programming track. Functions The SwitchPilot 3 Servo Mini can be powered either directly from the command station or from an external DC or AC power source. It has an RC servo output. It can control these drives so precisely that, in addition to switching turnouts, it can also control any other slow-moving sequences. The SwitchPilot 3 Servo Mini features built-in power-on pulse suppression to eliminate or reduce the inherent "jerking" of RC servos when power is applied. Furthermore, the power supply to the servo can be disabled to prevent the "humming" sound of some inexpensive servos. The servo can be operated in either "digital mode" or "proportional mode." In digital mode, the servo can move to two end positions, "A" and "B," depending on the switch position on the control panel. The position of these two end positions, as well as the speed at which the servo moves in the desired direction, can be individually adjusted on the SwitchPilot 3 Servo Mini. Digital mode is ideal for switching turnouts or signals that need to remain in a fixed position. In proportional mode, the servo can move to any position within the end positions "A" and "B" and can also stop. The servo only runs as long as the control panel sends a command. Releasing the button stops the servo. This allows you to stop a servo in any desired position. The servo speed can be individually adjusted. Proportional mode is ideal for (water) cranes, locomotive shed doors, or any other application that requires intermediate positions. For each servo, in addition to the end positions and rotation speeds, you can specify whether it should bounce after reaching the end position. Furthermore, to adapt to the various RC servos available on the market, the generation of the servo pulse can be adjusted. This allows for optimal control of inexpensive analog servos as well as modern digital servos (with microcontrollers). Analog Operation The SwitchPilot 3 Servo Mini can be used without a digital command station as a special feature: Two pushbuttons can be added as needed to control the servos directly. Setup The SwitchPilot 3 Servo Mini can be flexibly set up either on the programming track with DCC control units or on the main track with POM ("Programming on Main"). It can also learn addresses directly via a programming button. The easiest way to set it up, however, is with the integrated OLED display and the three input buttons: All settings can be checked and changed directly on the decoder. "Programming" via your control unit is not required. It really couldn't be simpler. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Servo Mini are largely protected against overload. We want you to enjoy your decoder for as long as possible.

Selling price: CHF 26.90 RRP CHF 28.90

On order, lead time to be confirmed

SwitchPilot signal decoder with 16 independent function outputs, push/pull, removable terminals
ESU 51840
SwitchPilot signal decoder with 16 independent function outputs, push/pull, removable terminals

SignalPilot, accessory decoder with 16 outputs Push/Pull, Removable screw terminals The ESU SignalPilot decoder is a multi-protocol decoder designed primarily for switching daylight signals. It has 16 outputs to which micro lamps or LEDs (with series resistors) can be connected directly. Because all outputs are designed as push/pull output stages, both daylight signals with common anode as well as daylight signals with a common earth connection (common cathode) are suitable, as is the case with Viessmann® signals. Motorised semaphore signals and turnout drives can also be operated with the SignalPilot. Operating modes The SignalPilot supports both DCC with RailComPlus® and Motorola®. Programming allows for each output to be assigned to any address or to a combination of addresses. Functionality The SignalPilot can be powered either directly by the digital command station or by any transformer /power supply unit providing DC or AC. The SignalPilot has 16 transistor outputs in push-pull configuration. Each output can be operated individually as continuous light, flashing light or pulse light. Here, the brightness or flashing frequency can be adjusted as well as fade-in and fade-out times. Various prototypical lighting effects such as soft dimming, fluorescent tube effect, defective fluorescent tube, gas lantern simulation, flicker light ensure a realistic result. Randomly controlled switching on/off as well as an on/off delay can also be activated. A night service extension can dim down the outputs together if so desired. The outputs of the SignalPilot are combined into signal aspects during configuration. In principle, two-, three-, four- or multiaspect signals are conceivable. Depending on the number of outputs involved, one or more turnout numbers (accessory addresses) are assigned to each signal, with the help of which you can later switch the individual signal aspects. Up to 16 turnout numbers are available for this purpose. The configuration of the signal aspects is carried out exclusively with the aid of the ESU LokProgrammer software. You select the desired signal aspects, then write them to the decoder and finally wire the signals as configured. All signal aspects predefined in the LokProgrammer software can be changed individually. The description of the signal aspects themselves is done with the help of XML files, which on the one hand are regularly extended by ESU or can be created and extended by you at your own discretion. In this way, „exotic” signals can also be supported. The SignalPilot is multi-protocol capable and can be used with digital command stations operating the Märklin® Motorola® system (e.g.: 6021, Central Station® or Mobile Station®) as well as DCC enabled command stations. The configuration can be doen by Programming on the Main (POM) and on the programming track. Thanks to RailCom®, CVs can also be read out. Optionally, a SwitchPilot Extension relay module can be docked to the SignalPilot. This facilitates setting up brake chapters or turnout frog polarisation. LokProgrammer The easiest method of configuring the SignalPilot is programming it with the ESU LokProgrammer. Simply choose the desired signal type, and the wiring will be displayed on the screen. Designed with future developments in mind The firmware of the SignalPilot can be updated with the aid of the LokProgrammer at any time. This may be necessary whenever we add new signal types. Art.No. Delivery 51840 SignalPilot, accessory decoder with 16 outputs Push/Pull, Removable screw terminals

Selling price: CHF 75.90 RRP CHF 82.90

On order, shipped within 4-5 days

Cable 10 m black
ESU 51942
Cable 10 m black

Super thin cable, 0.5mm diameter, AWG36, 10m bundle, black colour Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price. If the loco in question features no digital interface and you don’t want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the decoder. That’s how the Pro’s do it!

Regular price: CHF 5.80

On order, shipped within 4-5 days

USB-A to RS232 USB-A cable, 1.80 m
ESU 51952
USB-A to RS232 USB-A cable, 1.80 m

Cable USB-A 2.0 FTDI to RS232; 1.80m, for LokProgrammer As contemporary computers do not have a serial interface anymore we include a USB adapter cable. Since Windows Vista and Windows 7, cables that support USB 2.0 and are provided with a FTDI chip are required. The previous cables, available until the end of 2009, will not work with these operating systems due to their modified inner structures by Windows. If your LokProgrammer has been in use for a considerable time and you intend to switch to Windows 7 , you will need a new USB cable . The USB cable can be ordered at your ESU retailers shop, art. no. 51952. Art.No. 51952 Cable USB-A 2.0 FTDI to RS232; 1.80m, for LokProgrammer

Selling price: CHF 18.90 RRP CHF 19.90

On order, shipped within 4-5 days

Blind plug for LokSound L adapter board
ESU 51956
Blind plug for LokSound L adapter board

Blindplug for adapter board for LokSound L with pin connectors, Universal On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems. The dummy plug is plugged onto the Adat board 51959. DIP switches can be used to configure which function outputs should be switched on or off. The definition of the direction of travel is possible. The dummy plug is useful for converters who want to prepare their track 0 or track 1 locos digitally using the 51959 board, but do not want to install a LokSound 5 L decoder straight away. Art.No. Delivery 51956 Blindplug for adapter board for LokSound L with pin connectors, Universal

Selling price: CHF 13.90 RRP CHF 14.90

On order, shipped within 4-5 days

Adapter board for LokSound L V4.0 with pin headers
ESU 51959
Adapter board for LokSound L V4.0 with pin headers

adapter board for LokSound/LokPilot L with pin connectors This adapter board provides the suitable connections for your new LokSound/LokPilot L decoder. The decoder can be plugged directly into the socket terminal strip. All functions of the locomotive can be wired to soldering pads on the adapter board. Thus wiring is a breeze and, if necessary, the decoder can easily be exchanged. The adapter board is fixed with screws to the model. Dimensions 61.8 x 25.4 x 10.15 mm (LxWxH). 51959 with decoder

Selling price: CHF 25.90 RRP CHF 26.90

On order, shipped within 4-5 days

Hamo Magnet 22 0560
ESU 51960
Hamo Magnet 22 0560

For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding, and in combination with a LokSound – or LokPilot decoder, helps to make your loco run astonishingly smooth. We offer 4 different magnets, depending on the particular armature. You find the armature code number on a spare-parts sheet, which you can download from

Selling price: CHF 9.30 RRP CHF 9.50

On order, shipped within 4-5 days

Hamo Magnet 22 0450
ESU 51961
Hamo Magnet 22 0450

For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding, and in combination with a LokSound – or LokPilot decoder, helps to make your loco run astonishingly smooth. We offer 4 different magnets, depending on the particular armature. You find the armature code number on a spare-parts sheet, which you can download from

Selling price: CHF 9.30 RRP CHF 9.50

On order, shipped within 4-5 days

Hamo Magnet 23 5690
ESU 51962
Hamo Magnet 23 5690

For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding, and in combination with a LokSound – or LokPilot decoder, helps to make your loco run astonishingly smooth. We offer 4 different magnets, depending on the particular armature. You find the armature code number on a spare-parts sheet, which you can download from

Selling price: CHF 7.15 RRP CHF 7.50

On order, shipped within 4-5 days

Permanent magnet for Märklin 3015
ESU 51965
Permanent magnet for Märklin 3015

For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding, and in combination with a LokSound – or LokPilot decoder, helps to make your loco run astonishingly smooth. We offer 4 different magnets, depending on the particular armature. You find the armature code number on a spare-parts sheet, which you can download from

Selling price: CHF 24.90 RRP CHF 25.90

On order, shipped within 4-5 days

I/O expansion board 21MTC for V4.0 decoder
ESU 51970
I/O expansion board 21MTC for V4.0 decoder

I/O expansion board for LokSound, LokPilot 21MTC (4x AUX, 2x Servo, Smokeunit) With this expansion board you can easily expand your LokPilot or LokSound decoder (with 21MTC interface!): All you need to do is to plug the decoder onto the expansion board and benefit from using 4 additional function outputs (AUX5 through AUX8) for lighting effects, coupler etc. In addition, you are able to connect 2 RC-servos! The 5V voltage needed (for this) will be also provided. The highlight of the expansion board is surly the control electronics for synchronised smoke units. You just need to install an ESU smoke unit (from Class 215) into your locomotive that allows to generate synchronised steam chuffs or Diesel smoke. With the help of the LokPilot / LokSound decoder all functions can be controlled in a direct way and are fully integrated into function mapping. The board measures 15.5mmx 30mmx 5.5mm (0.61 x 1.18 x 0.22 inch) and has therefore the exact size of a LokSound decoder. The module can be directly plugged into a 21MTC interface of a loco (if enough height available) or freely wired via its cable connections. Suitable for 21MTC (not MKL) decoders from generation 4.

Selling price: CHF 44.90 RRP CHF 47.90

On order, shipped within 4-5 days

Adapter board for LokSound XL V4.0
ESU 51971
Adapter board for LokSound XL V4.0

Adapter board for LokSound XL with PIN connectors For professionals in digital model railroading there is a new adapter board. This makes installation easier and safer. First all wires are connected to the soldering points of the adapter board. All contact points (terminals) are present on both - top and bottom.  After that the LokSound XL decoder is plugged on with the multi-pin connector. Finished. Finally you can remove and reinsert your decoder at any time. Art.No. 51971 Adapter board for LokSound XL with PIN connectors

Selling price: CHF 18.90 RRP CHF 19.90

On order, shipped within 4-5 days

24-pin E24 socket to PluX16 adapter board
ESU 51992
24-pin E24 socket to PluX16 adapter board

Adapter board 24 pin E24 socket to PluX16 This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means, for example, a LokSound 5 Nano or LokPilot 5 Nano can be easily installed in older locomotives that only provide a PluX16 interface (e.g. some Fleischmann H0 locomotives or Piko N or TT locomotives) Art.No. Delivery 51992 Adapter board 24 pin E24 socket to PluX16

Selling price: CHF 8.70 RRP CHF 8.90

On order, shipped within 4-5 days