Accessories
Heavy goods transport in miniature format! A blue, grey truck loaded with a wooden crate drives its delivery over the miniature layout. The Car System Digital vehicle impresses with its compact technology, small ultrasonic capsule and high level of detail.
On order, shipped within 4-5 days
Reliability that gets there - the DHL delivery van brings movement and everyday reliability to your digital system. Equipped with an integrated ultrasonic capsule and lovingly designed details, the Car System Digital vehicle is the ideal choice for realistic logistics scenarios.
On order, shipped within 4-5 days
Attention - the next furniture transport is arriving! The white XXXLutz lorry rolls into the driveway, ready for unloading. With its white colour and the striking imprint of the furniture store on the side, it immediately catches the eye on the model layout and sets a lively accent.
On order, lead time to be confirmed
An easy introduction to the world of Car System Digital: this starter set contains all the essential components you need to get started straight away. No searching, no retrofitting: unpack, assemble, set up and start straight away. The highlight of the set is the white lorry with typical Car System Digital functions. As soon as the system is set up, it becomes an active part of the model world and ensures lively scenes on the miniature roads, where it reliably delivers its goods. Bundle consisting of: - 161346 Car System Digital, radio master - 161345 Radio extension module - 3 x 161360 Car System Digital, single satellite, small - 180699 Transformer, 66 W - 161349 Processor-controlled charging station - 161315 Car System Digital Lorry MB Atego FedEx (HERPA)
Pre-order, release expected in November 2026
Controllable with the Car System Digital software! Compact, radio-based expansion module with five outputs (e.g. for points and other switched elements), as well as one input. Ideal for controlling turn-off or stop manoeuvres in connection with a correspondingly desired signal image. The outputs can be configured individually or joined together to form different light images which are then communicated with via a single address. Usable with: - Car System Digital, Radio Master, Art. 161346 - Car System Digital, Master, Art. 161354 - Car System Digital, Beginner’s Set, Art. 161355 Several radio extension modules can be used in the system. The connection is made to 16 V AC.
On order, lead time to be confirmed
"Compact Car System Digital! The »Radio Master« in USB flash drive size allows you to control all of your digital vehicle’s features. Using the …
On order, shipped within 4-5 days
The latest generation of microprocessor controlled charging stations reliably charges all analog or digital Car System vehicles equipped with Li-ion or NiMH batteries. The digital vehicle’s basic light and sound functions can be switched on and off using the charging station’s control keys. You don’t need a separate command station for adjusting basic functions. The charging station operates with 16 V AC voltage. The boost charge function reduces charging time for digital vehicles to about 1 hour. If you use the complete Car System Digital system, you only need the station for charging your digital vehicles.
On order, lead time to be confirmed
The expansion module is connected to the basic module (interface) per LocoNet, to have more inputs and outputs for stop sections, branch-off junctions, traffic lights, lighting, sensors and parking spaces for more complex model layouts. Several expansion modules can be connected in series. 11 inputs for sensors, 12 outputs for operational elements.
On order, shipped within 4-5 days
The satellites serve to locate the vehicle. The duration of the vehicle ultrasound signal is transmitted to all the satellites and therefore, the position of the vehicle can be precisely determined with an accuracy of 10 mm. Depending on the size of the system, 3 satellites are necessary for the fully automated digital operation of the Car System Digital.
On order, shipped within 4-5 days
Upgrade: »Car System Digital Master« from now on with DCC output, too. The »Car System Digital Master« also allows from now on to address the most varied DCC compatible devices, such as e.g. servo, points or signal decoders. To use the new functionality simply assign in the Car System Digital software a digital address you have previously programmed in your DCC compatible device. Radio basic unit! The »Car System Digital Master« permits communication between all required components and controls all functions. A radio transmitter and receiver module ensures communication with the satellites and the vehicles, respectively. The »Car System Digital Master« is provided with the following interfaces: USB interface for connection to a PC LocoNet port to connect any other LocoNet components, such as e.g. the extension module, Art. 161352 DCC input to connect any DCC capable digital control unit DCC output to connect DCC compatible devices Output to provide up to 6 satellites with rectified supply voltage Independent supply voltage of the Master with 16 V AC High-efficiency aerial for radio link between digital vehicles, satellites and Radio expansion modules, Art. 161345 Please note: The »Car System Digital Master« does not provide any primary supply voltage for connected decoders, and exclusively supports the DCC specification according to standard sheet. The »Car System Digital Master« includes software licence type »Basic version« allowing the operation of two digital vehicles. All devices are radio-based two-way short-range transmission systems, which are regulated under European standard sheet EN 300-220-1 (2). Published under: ETSI EN 300 220-2 V2.1.1. Frequency spectrum includes bands 868 to 870 MHz.
On order, shipped within 4-5 days
The beginner’s set, without the vehicle, provides all components that are necessary for getting started with fully automated operation of the Car System Digital. In addition to the 3 satellites, the Car System Digital Master, as well as the software necessary for the controls, are included in the set. The software is Windows compatible from Version XP SP2. In addition to a totally realistic road load, a fully comprehensible distance control of the vehicles is also possible! Playful fun is guaranteed. The »Car System Digital Master« is provided with the following interfaces: - USB interface for connection to a PC - LocoNet port to connect any other LocoNet components, such as e.g. the extension module, Art. 161352 - DCC input to connect any DCC capable digital control unit - DCC output to connect DCC compatible devices - Output to provide up to 6 satellites with rectified supply voltage - Independent supply voltage of the Master with 16 V AC - High-efficiency aerial for radio link between digital vehicles, satellites and Radio expansion modules, Art. 161345
On order, shipped within 4-5 days
Compact! Car System Digital satellite with small enclosure, ideal even under confined space conditions, such as e.g. in shadow areas that are not accessible on your installation.
On order, lead time to be confirmed
Big technology in a small space - convert now and get started! Our new, ultra-compact conversion kit with integrated 5 x 5 mm ultrasonic capsule makes the digitalisation of Car System vehicles easier than ever before. Thanks to its minimal size, it is perfect for retrofitting even particularly small vehicle models - ideal for individual conversions and creative projects. With just one circuit board, any analogue model can be turned into a fully-fledged digital vehicle - equipped with: Ultrasonic localisation for precise vehicle tracking Fully automatic distance control Dynamic speed adjustment in play mode The circuit board also features solder pads for additional lighting and sound functions - perfect for experienced hobbyists who want to get the most out of their model. Small. Powerful. Future-proof.
On order, lead time to be confirmed
System sound! Loudspeaker for retrofitting conversion vehicles in conjunction with »Analog-Digital Conversion Kit«, Art. 163701.
On order, shipped within 4-5 days
Modular cable, RJ12 plug to RJ12 plug, 6 wires, all assigned, 1:1, length: 0.5 m. Connection cable for all common LocoNet modules.
On order, shipped within 4-5 days
Modular extension, RJ12 plug to RJ12 socket, 6 wires, all assigned, 1:1, length: 2 m. Extension cable for all common LocoNet modules.
On order, shipped within 4-5 days
Modular junction/adapter, 1 x RJ12 socket on 2 x RJ12 socket, 6P6C, all assigned, 1:1. Adapter/junction to connect to all common LocoNet cables.
On order, lead time to be confirmed
FALLER Car System USB charger with the following features: - Can be used worldwide – USB A from 1.1 with 500mA power handling capacity. - Suitable for all FALLER Car System vehicles – any generation and gauge (except FALLER Car System Digital) - Suitable for all original FALLER Car System batteries – installed battery type is automatically detected and the charging current is adjusted accordingly. - Automatic shutdown – switches off after a certain amount of time and when charging end voltage has been reached. - LED signals for status and error messages. Technical data: - Input side: connection type: USB A ('male'), voltage: 5 V, current max: 0.5A - Output: voltage max: 2.4 V, current max: 0.5 A
On order, shipped within 4-5 days
The extremely economical beginner’s package with the major functional elements allowing to build Car System installations.
On order, shipped within 4-5 days
"Nearly every traffic situation can be simulated. Whether you want to plan a bus stop, diagonal parking lot, work zone, right-hand or left-hand traffic. The vehicle will stop by itself. Along with 8 inputs and 8 outputs, a total of 15 control programs can be selected via microswitches. Rotary control knobs allow to adjust different periods of time. Comprehensive instructions for use with plenty of examples of connections and control sequences are supplied. 16 V alternating voltage
On order, lead time to be confirmed
This Traffic Light Control allows you to pilot every kind of traffic light installed on Car System layouts. Power supply through FALLER Transformer (art. 180699). With detailed instructions for use. Functions: - up to 4 traffic lights can be connected (12 LEDs) - the length of time of the different lights can partly be programmed at will - up to 16 different LEDs (of 20 mA each) can be connected without having to use a surge protector - running lights possible with up to 8 lamps
On order, lead time to be confirmed
Prepared for connection to the Traffic Light Control (item no. 161654).
On order, shipped within 4-5 days
Interacting with scenarios on the spot. Module composed of 2 relays (12 V DC) on small PCB that allows to trigger various actions on the model layout by plugging some wire straps (also called jumpers). - Connected to the »Traffic-Control«, Art. 161651 or the »Extension module«, Art. 161352 the module can switch on and off e.g. a smoke generator, Art. 180690 or a modeller’s synchronous motor, Art. 180629 (alternating current). - Connected to an »Extension module« one of the outputs can actuate a motor in forward motion, while the other output will actuate the motor in reverse motion, by plugging the wire straps accordingly. - It is also possible for the module to link various digital systems potential-free: one of the systems switches the relay on and that signal will be processed in another system. - By plugging the wire straps accordingly, two signals can be generated out of one signal: since a normally closed contact and a normally open contact of the relay are used, either one contact or the other will be closed depending on whether the relay has pulled up or is open. By suitably connecting the relay module it is also possible to reverse a signal. - By connecting the relay module in series, it is possible to switch higher current values or even other voltages (e.g. an alternating voltage) on modules the outputs of which are too weak for the required current. Further possible uses are described in the instruction manual supplied.
On order, shipped within 4-5 days
The speed trap is equipped with a very bright LED and is prepared for connection with a series resistor for 12-16 V DC. The flashing light is triggered when the built-in sensor (Art. 161773, not included) is passed over. A flashing light box for H0 or N can be built.
On order, shipped within 4-5 days