Accessories
Advantageous combination. The set contains all parts required to build a personalized functioning lane width neutral bus stop. Along with a control unit suitable for a bus stop (16 V alternating current) there are 1 Stop section, 1 Branch-off junction, 2 Sensors, 1 additional magnet (H0/N), 5 m of Special contact wire, 1 mounting template (H0/N) as well as detailed instructions within the set.
On order, shipped within 4-5 days
This groove cutter was developed and made especially for laying the contact wire in the FALLER Car System. Detailed instructions enclosed.
On order, shipped within 4-5 days
10 m. Diameter and alloy adapted for use with steering magnet.
On order, shipped within 4-5 days
Parking space for the permanent stopping of vehicles in car parks. The vehicle is reactivated by means of the magnetic field of the electric coil. Connection: 16 V, AC voltage. Current draw 330 mA.
On order, lead time to be confirmed
The accumulator voltage is interrupted via a reed switch in the vehicle by means of the magnetic field of the electric coil. Connection: 22 V, DC voltage, 160 mA.
On order, shipped within 4-5 days
Whenever it is activated the magnetism of the branch-off junction steers a vehicle onto a second turning-off guide wire. This occurs via the magnet fastened to the steering slider built into the vehicles.
On order, shipped within 4-5 days
Suitable for charging all accumulators built into Car System vehicles.
On order, lead time to be confirmed
Sensors are designed for the control of stop points, branch-off junctions, etc. They are activated by additional magnets fitted to the bottom of vehicles. Connection to Traffic-Control (art. 161651). Max. switching power 5 W Max. switched current 200 mA
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or independent operation. The most current international signal sequences can be triggered via the inputs of the box: one regulator each for country setting and duration. Possible signal lights: -green/yellow/red -green/yellow/red/red-yellow -green/green blinking/yellow/red/red-yellow.
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red. Equally suitable for Car System and Car System Digital. By connecting them to the control unit »Traffic Light Control« art. 161654 they help represent the international signal sequence with three states (green/yellow/red). By connecting them to an »Extension module« art. 161352 they help represent the international signal sequences with three states (green/yellow/red), four states (green/yellow/red/yellow-red) or five states (green/green blinking/yellow/red/red-yellow).
On order, shipped within 4-5 days
Two traffic lights with LED light signals in the colours green, yellow and red without control. Equally suitable for Car System, Car System Digital or stand-alone operation. The construction site traffic lights are ready for connection for: 12-16 V AC/DC. Height: 32 mm. We recommend the control units: 161654, 161352, 161345.
On order, shipped within 4-5 days
Roads and control technique in the advantageous set. This set allows to build a 2-lane H0 oval using Laser Street elements inclusive of a functioning bus stop. Along with a control unit suitable for a bus stop (16 V alternating current) there are the required Laser Street elements (H0), 1 Stop section, 1 Branch-off junction, 2 Sensors, 1 additional magnet (H0), 5 m of Special contact wire as well as detailed instructions within the set.
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or independent operation. The most current international signal sequences can be triggered via the inputs of the box: one regulator each for country setting and duration. Possible signal lights: -green/yellow/red -green/yellow/red/red-yellow -green/green blinking/yellow/red/red-yellow.
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red. Equally suitable for Car System and Car System Digital. By connecting them to the control unit »Traffic Light Control« art. 161654 they help represent the international signal sequence with three states (green/yellow/red). By connecting them to an »Extension module« art. 161352 they help represent the international signal sequences with three states (green/yellow/red), four states (green/yellow/red/yellow-red) or five states (green/green blinking/yellow/red/red-yellow).
On order, shipped within 4-5 days
1 x for item no. 161573, 162005, 162006 and 162931. 2 x for item no. 161303, 161304, 161305, 161516, 161536, 161549, 161552, 161560, 161561, 161577 and 161578.
On order, shipped within 4-5 days
Modification part
On order, shipped within 4-5 days
Modification part
On order, shipped within 4-5 days
Modification part
On order, lead time to be confirmed
Modification part
On order, lead time to be confirmed
Modification part
On order, lead time to be confirmed
Modification part
On order, shipped within 4-5 days
Printed circuit board allowing to retrofit various analog Car System vehicle models for digital operation with ultrasonic locating, fully automatic distance control and modifications of the driving speed while playing. Moreover all soldering pads required for additional lighting and equipment with sound functions are provided on the board. Experienced modellers will thus be able to convert any analog Car System vehicle to an integrally Car System Digital model.
On order, shipped within 4-5 days
Make the stationary vehicle model of your choice fit for Car System. Chassis kit to motorize stationary models of buses and trucks for Car System operation. Set contains all vehicle components required for the assembly of a fully functioning two-axle Car System H0 chassis (bus and truck), except the rechargeable batteries: support PCB, motor with worm, motor holder with worm wheel and driving axle, driving wheels, front axle with wheels, steering rod with magnet, front axle holder, switch, charging socket, dry-reed sensor, resistors to adjust the charging current and driving speed. Conversion info: - Axle base can be selected continuously between 38 mm and 88 mm - Width: 29 mm - Support PCB with all electrical connections required for easy soldering of components, incl. soldering pads for warning beacons - Fastening of motor and gear unit at choice horizontal (e.g. in buses and trucks with dropped frame) or vertical (e.g. in semitrailer trucks) - Built-in HERPA standard crossmember can be removed when using any bodywork of other manufacturers
On order, shipped within 4-5 days
Make the stationary vehicle model of your choice fit for Car System. Chassis kit to motorize stationary models of N buses and N trucks for Car System operation. Set contains all vehicle components required for the assembly of a fully functioning two- or three-axle Car System N gauge chassis (bus and truck), except the rechargeable batteries: Motor with worm, Motor holder with worm wheel and driving axle, Driving wheels, Front axle with wheels, Steering rod with magnet, Front axle holder, Switch, Charging socket, Dry-reed sensor, Resistors to adjust the charging current. Conversion info: - Fastening of motor in gear unit at choice horizontal (e.g. in buses and trucks with dropped frame) or vertical (e.g. in semitrailer trucks) - Axle bases (horizontal motor) can be selected continuously between 25 mm and 43 mm - Axle bases (vertical motor) can be selected continuously between 20 mm and 40 mm - Width: approx. 16 mm
On order, lead time to be confirmed