Accessories
Circuit board with 2 buffer capacitors of 1 farad each for connection to the mLD3 and mSD3 with the item nos. 60972, 60975, 60976 and 60977. The buffer capacitor prevents, for example, flickering lights and sound dropouts caused by dirty track sections, for example.
In stock: 4 on the shelf, shipped within 1-3 days
Model Pack of 10 pieces. Matching the standard plugs and sockets from the 71400 assortment. Note The plugs and sockets cannot be combined with the earlier version (pack item no. 7130). The sockets fit with limitations in the jacks of control panels and switch panels of the earlier version. The controllers and decoders in the current Märklin range have been converted to the new standard.
Content: 10 pc. (CHF 0.49 / 1 pc.)
In stock: 4 on the shelf, shipped within 1-3 days
Model For the 73400 interior lighting. With an asymmetric pickup shoe and a common return spring. Note The combination of 2 x 73400 + 1 x 73406 is the standard lighting for the new UIC-x coaches with a length over the buffers of 28.2 cm.
In stock: 4 on the shelf, shipped within 1-3 days
Model Universal circuit board with several LEDs for retrofitting most of the coaches in the Märklin H0 range. A built-in buffer capacitor allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be shortened at several places for shorter coaches. Retaining clips for mounting on the interior details are included. Highlights A cosy feel in the coach: dimmed LEDs. Flicker-free operation thanks to a buffer capacitor Adjustable brightness for the interior lighting
In stock: 4 on the shelf, shipped within 1-3 days
Is inserted at the rail joint between the contact fishplates of the tracks.
In stock: 4 on the shelf, shipped within 1-3 days
6 pieces. 10 x 5 x 1.5 mm. For actuating the 7555 switching contact. For locomotives with little ground clearance.
Content: 6 pc. (CHF 2.48 / 1 pc.)
In stock: 4 on the shelf, shipped within 1-3 days
Contents: 10 pieces each. They are required for the connection to other track when the 2205 flexible track is shortened.
In stock: 4 on the shelf, shipped within 1-3 days
For hooking into the tower masts. It spans 3 tracks. The span is approximately 72 mm.
In stock: 4 on the shelf, shipped within 1-3 days
The Glue for Our Gras-Master! NOCH Grass Glue was specially developed for electrostatic flocking with the NOCH "Gras-Master". Compared to normal white glue, NOCH "Grass Glue" has a lower surface tension and sets more slowly – the grass fibres are therefore surrounded by the glue bed and remain upright in it. This process makes for a super realistic result... just like the original! Because the Grass Glue sets more slowly, larger areas can be covered with grass and over a longer period. Note: NOCH Grass Glue dries transparent. 250 g
In stock: 4 on the shelf, shipped within 1-3 days
Ballast Glue This glue is ideal for applying ballast. Thanks to the dosing tip, even hard-to-reach areas are easy to reach. To do so, distribute the loose Ballast between the sleepers and then drizzle the Ballast Glue onto it. Design realistic terrain with high-quality ballast with the help of the "Ballast Glue". The Ballast Glue dries transparent. Note: consumption for 100 cm ballasted track on a non-absorbent surface: H0 approx. 30 g, N approx. 15 g 130 g
In stock: 4 on the shelf, shipped within 1-3 days
Create Super Realistic and Inexpensive Rock Faces and Mountainsides! NOCH Nature Paints are perfectly colour-coordinated with the earthy, natural hues of rocks and are thus ideally suited to colouring rocks and mountains. The "Nature Paints Set" contains 20 ml of highly concentrated paint in six different shades: cement gray, ochre, olive, earth brown, grey and black. The paints are diluted with water before use and applied with the enclosed sponge dabber. Rocks can thus be shaded nuance by nuance or substrates realistically coloured prior to being covered with grass. 20 ml each, 1 mixing cup, 1 sponge dabber
In stock: 4 on the shelf, shipped within 1-3 days
Revell’s popular 14 ml can of synthetic enamel paint. It does not attack the surface of plastic models and is also suitable for many other materials. mixable with all colours except signal colours thinnable with Revell Color Mix, for brush and spray gun Colour: white gloss (RAL 9010).
In stock: 4 on the shelf, shipped within 1-3 days
Revell Color is a synthetic resin enamel paint that does not attack the plastic surface of plastic models. The 14 ml paint can, which is popular with many hobbyists, can also be used to paint many other materials. All colors - except signal color - can be mixed with each other and can be diluted with 'Revell Color Mix'. This means that the paint can be applied not only with a brush, but also with a spray gun. The cleaning agents used are 'Revell Painta Clean' for the brushes and 'Revell Airbrush Clean' for the spray gun.
In stock: 4 on the shelf, shipped within 1-3 days
Color: blue. Conductor cross section 0.2 mm². Length 10 m
In stock: 4 on the shelf, shipped within 1-3 days
Traction tyres for AC locomotives. For wheels with diameter 17.5–20.0 mm. Content: 10 pieces/package.
In stock: 4 on the shelf, shipped within 1-3 days
Heads for standard coupler pockets in accordance with NEM 362. Content: 2 pieces/package.
In stock: 4 on the shelf, shipped within 1-3 days
Close-coupling heads with advanced uncoupler tab for standard coupler pockets in accordance with NEM 362. Content: 4 pieces/package.
In stock: 4 on the shelf, shipped within 1-3 days
Close coupling heads with advanced uncoupler tab, suitable for Fleischmann models with trunnion pocket. Content: 2 pieces/package.
In stock: 4 on the shelf, shipped within 1-3 days
AC pick-up. Long version. Length 56 mm.
In stock: 4 on the shelf, shipped within 1-3 days
Magnets to trigger the 42605 and 61193 sleeper. Very small construction, therefore can easily be mounted beneath any vehicle. Content: 6 pieces/package.
In stock: 4 on the shelf, shipped within 1-3 days
Electric uncoupler track. Length 115 mm (half standard length).
In stock: 4 on the shelf, shipped within 1-3 days
Manual uncoupler track G100. Length 100 mm. Cannot be retrofitted for electric operation.
In stock: 4 on the shelf, shipped within 1-3 days
For easy switching of reversing loops in the DCC and Selectrix systems. No solenoid switch is required. Also suitable for computer operation. Polarity changeover optionally by means of short-circuit detection or sensor tracks (current sensors). Suitable for Minitrix and Trix H0.
In stock: 4 on the shelf, shipped within 1-3 days
For eliminating motor interference in digital locomotives. Electric motors generally produce interference that can alter the data transmission to a digital decoder to such an extent that normal digital operation of the decoder is no longer possible. In new locomotives, the motors are generally suppressed. Older models have to be retrofitted with the appropriate electronic components. The motor suppression kit consists of a capacitor, two chokes and installation instructions, and can be used in all H0 locomotives.
In stock: 4 on the shelf, shipped within 1-3 days