Accessories
Model Receiver for switching continuous current on and off for lighting, motors, Hobby colour light signals (74371, 74380, 74391) and other electrical accessories. The m 84 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 84 contains 8 relays in 4 electrically isolated groups for switching loads. By using a 66360 power supply, the bistable state of the relays and the storage of the switch setting can be implemented. 4 Hobby colour light signals and 4 Hobby distant signals can be controlled, with the option of switching the track current at the same time. The m 84 also contains 8 inputs for switching the relays manually (similar to the 7244 remote switch). The m 83 and m 84 decoders can be connected in any sequence. The connections are made by means of lift terminals. The maximum current-carrying capacity per group is 5A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated
In stock: 5 on the shelf, shipped within 1-3 days
Model Feedback module with current sensors for layouts with a two-rail supply. Can be plugged into the L 88 (60883) with the connecting cable included. Connection socket for another s88 DC decoder (60882). 2x 8 inputs for current sensors (with optocouplers) in 2 different circuits can be combined into one circuit with 16 inputs. The L 88 (60883) is required for connecting s88 feedback units to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock: 5 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder mSD3 has a 21-pin 21mtc interface (to NEM 660) and a matching interface board for retrofitting analogue and digital locomotives. The märklin SoundDecoder mSD3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a steam locomotive.
In stock: 5 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder3 has a 21-pin interface and a matching interface board for retrofitting analogue and digital locomotives. The märklin SoundDecoder3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a diesel locomotive.
In stock: 5 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder mLD3 has a soldered-on wiring harness. The märklin LokDecoder mLD3 supports the mfx, MM1, MM2 and DCC digital formats. A plug for NEM-652 interfaces, to be soldered on yourself, is included.
In stock: 5 on the shelf, shipped within 1-3 days
Model For 11 plugs to the new standard. All of the connections are electrically connected. The power feed is also possible by means of 1 plug of the earlier version. Size 47 x 26 mm. The Märklin 72090 distribution plate ensures clean, efficient wiring on your layout. All of the connections are electrically connected, so that you can distribute power and signals simply and reliably. Thanks to 11 plug sockets to the new Märklin standard and the option of a power feed by means of older plugs, your layout remains flexible and can be expanded. Highlights Distribution plate with 11 connections to the new Märklin standard All connections electrically connected for simple power distribution Compatible with old and new Märklin plug systems Compact design (47 x 26 mm) for flexible placement
In stock: 5 on the shelf, shipped within 1-3 days
Installation from below.
In stock: 5 on the shelf, shipped within 1-3 days
Model For the 73400 interior lighting. With an asymmetric pickup shoe and a common return spring. Note The combination of 2 x 73400 + 1 x 73404 can replace the previous 7330 or 7335 interior lighting.
In stock: 5 on the shelf, shipped within 1-3 days
With flat plugs for C tracks. 2-pole, red and brown cable. Length 1 m. The 74040 connection set can only be used with the older generation of equipment.
In stock: 5 on the shelf, shipped within 1-3 days
The Perfect Addition! The NOCH item 61650 includes 35 round wooden support poles, each 40 cm long, designed for use with the TERRA-FORM system. These poles act as structural framework for terrain modelling on model railway layouts. You don’t need any manual experience for this, and only a few tools: a pair of scissors, a craft knife, a backsaw, a hammer and a hot glue gun. In contrast to the conventional approach, you start by laying out the tracks. You first set up the rail system and lay all electrical connections on an underlay of your choice (e.g. blockboard, chipboard or solid wood board). After a test drive, you start designing the landscape – over and around the track layout. The first thing you do is set up the tent-like framework. Since the round poles are only inserted into the connecting elements, the structure can be corrected and changed at any time. With this framework system, a subsequent redesign is just as easy as the ongoing ‘maintenance’ of the rails and the entire technology. When the framework is in place, it is then covered with NOCH Landscape Crepe Paper and now forms your ‘blank terrain’, which you can further develop according to your wishes. 40 cm long, 35 pieces
In stock: 5 on the shelf, shipped within 1-3 days
Revell Color is a synthetic resin enamel paint that does not attack the plastic surface of plastic models. The 14 ml paint can, which is popular with many hobbyists, can also be used to paint many other materials. All colors - except signal color - can be mixed with each other and can be diluted with 'Revell Color Mix'. This means that the paint can be applied not only with a brush, but also with a spray gun. The cleaning agents used are 'Revell Painta Clean' for the brushes and 'Revell Airbrush Clean' for the spray gun.
In stock: 5 on the shelf, shipped within 1-3 days
Revell synthetic enamel paint in the popular 14 ml tin. It does not attack the surface of plastic models and is also suitable for many other materials. mixable with all colours except signal colours thinnable with Revell Color Mix, suitable for brush and spray gun Colour: Matt black (RAL 9011).
In stock: 5 on the shelf, shipped within 1-3 days
Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
In stock: 5 on the shelf, shipped within 1-3 days
Traction tyres for DC locomotives. For wheels with Ø 6.8–8.2 mm. Content: 10 pieces/package.
In stock: 5 on the shelf, shipped within 1-3 days
Electric uncoupler track, length: 100 mm, with electric motor. Digitally switchable with uncoupler decoder 61197.
In stock: 5 on the shelf, shipped within 1-3 days
Decoder for all DC locomotives with a current consumption of up to 1000 mA (motor 1000 mA, lighting 300 mA). Suitable for digital locomotives with a 14-pin digital interface (mTc14). Universally usable in Selectrix/SX2 and DCC format. Automatic digital and analogue detection. Adjustable maximum speed. Adjustable motor pulse variants. Automatic load compensation. Connection for lighting function. Connection for additional function. Short-circuit protection of the motor output. Overload protection of the lighting output. Overload protection of the additional function. Programming of additional settings by selecting address "00", e.g. fine graduation of the pulse widths (control variant), polarity reversal of the direction of travel. in Selectrix operation: 31 speed steps. (Sx2 127 speed steps). 111 addresses. (Sx2 10,000 addresses). 1 additional function (Sx2 16 additional functions). Block section operation with simple diodes (1 or 2 stopping sections). Braking mode with brake diode. in DCC operation: Manual speed step selection 14/28 steps. Automatic switchover to 128 speed steps. Addresses optionally long or short. Braking mode with DC voltage and "broadcast-mode" braking generators. Dimensions approx. 14 x 9 x 1.8 mm.
In stock: 5 on the shelf, shipped within 1-3 days
Item no. 71641 5-piece 6-pin plug NEM 651
In stock: 5 on the shelf, shipped within 1-3 days
12 light boxes - each 3 pieces in 4 different sizes and one house lighting LED white. The light boxes provide completely new clear lighting of each single room. For lighting we recommend our LEDs with connection cable in yellow item 6047, white item 6048 and warm-white item 6046, the boards with an LED in yellow item 6007, white item 6008, warm-white item 6006, boards with two LEDs in yellow item 6018, white item 6017 and warm-white item 6021 or the LED with TV simulation item 5079. Light boxes should be fixed inside the house behind the windows. Light is prevented from shining through. Also suitable for TT and N buildings. Dimensions light boxes: L 1,7 x W 1,8 x H 2,6 cm, L 1,7 x W 1,6 x H 2,1 cm, L 1,7 x W 1,2 x H 1,9 cm, L 1,7 x W 1,4 x H 2,3 cm.
In stock: 5 on the shelf, shipped within 1-3 days
Modern street lamp with plate reflector for a spacious and diffuse illumination. Original located e. g. in the government sector of Berlin and at modern stations. Height: 7,5 cm.
In stock: 5 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. To be mounted under the ceiling. Ø 0.6 x H 0.6 cm.
In stock: 5 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. For wall mounting.
In stock: 5 on the shelf, shipped within 1-3 days
The floodlight spots stand out for their extremely high brightness. All spots are movable up-, down- and backwards. Maintenance free by LED lighting. With base socket for easy mounting. Height: 1 cm.
In stock: 5 on the shelf, shipped within 1-3 days
Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Height: 7 cm.
In stock: 5 on the shelf, shipped within 1-3 days
High-grade litz wire for low-loss current feed and signal transmission.
In stock: 5 on the shelf, shipped within 1-3 days