Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Accessories

Filter products
10% off the recommended price
LED light strip 100mm, digital (2/pack)
Massoth 8122302
LED light strip 100mm, digital (2/pack)

The newly developed light strips, available in 100 mm and 330 mm lengths and 10 mm width, are fitted with warm white, very bright LEDs on a white circuit board. They can be used in both digital and analogue operation with a voltage of 5 – 24 volts. Screw holes at various intervals allow mounting in most series vehicles; alternatively, gluing is possible, and if necessary, the long version can be shortened.

Selling price: CHF 27.90 RRP CHF 31.10

On order, lead time to be confirmed

10% off the recommended price
LED light strip 300 mm (2/pack)
Massoth 8123010
LED light strip 300 mm (2/pack)

The use of large-area special LEDs significantly improves the lighting of the wagon. A permanently integrated buffer capacitor powers the light strip for up to 30 seconds. Two additional outputs operate directionally in analogue mode; in the digital version (VHDM DCC-compatible), they are freely programmable with various effects. Each set includes two light strips.

Selling price: CHF 31.90 RRP CHF 35.60

On order, lead time to be confirmed

10% off the recommended price New
LED light strip 300 mm (2/pack)
Massoth 8123011
LED light strip 300 mm (2/pack)

The next generation of the proven and popular 300 mm LED light strips is the logical further development for even more realistic and convincing coach interior lighting. 8123011 LED light strip 100 mm can be operated both analogously and digitally. A decoder is not integrated.

Selling price: CHF 33.90 RRP CHF 37.70

On order, lead time to be confirmed

10% off the recommended price
LED light strip 300mm, DCC (2/pack)
Massoth 8123020
LED light strip 300mm, DCC (2/pack)

The use of large-area special LEDs significantly improves the lighting of the wagon. A permanently integrated buffer capacitor powers the light strip for up to 30 seconds. Two additional outputs operate directionally in analogue mode; in the digital version (VHDM DCC-compatible), they are freely programmable with various effects. The contents supplied include two light strips each; the digital version also includes two matching connecting cables.

Selling price: CHF 44.90 RRP CHF 50.00

On order, lead time to be confirmed

10% off the recommended price New
4WLR coach lighting control (2/pack)
Massoth 8128010
4WLR coach lighting control (2/pack)

eMOTION 4WLR coach lighting control (2/Pack) Less flickering, simple operation: the lighting upgrade for your LGB RhB express coaches. The eMOTION 4WLR coach lighting control replaces the factory-fitted analogue lighting control and supplies the existing coach lighting. Its integrated voltage buffer bridges brief interruptions in the power supply and thereby reduces annoying flickering, for atmospheric journeys through the garden in the evening. Reuse the existing lighting The connecting wires of the coach lighting are resoldered to the corresponding solder pads on the new circuit board. Four light outputs are available for this. Two MiniCT sockets on the top allow table lighting to be connected; an additional solder pad makes it easier to wire them in series, for example in an RhB restaurant car. For reliable current collection, both bogies can be connected to the two track connections on the underside of the circuit board. Voltage buffer already integrated The standard voltage buffer stores 39 Ws of energy. During brief contact interruptions it continues to supply the lighting. Even after the track voltage is switched off, the stored energy remains available until the buffer is discharged. The bridging time depends on the current requirement of the connected lighting. For analogue and DCC operation The 4WLR works with both analogue DC voltage and DCC track voltage. In both operating modes the lighting is switched on and off with the integrated slide switch. No programming is required. In analogue operation the lighting needs a sufficient running voltage of at least about 7 to 8 volts. On a DCC layout it remains supplied even when stationary as long as track voltage is present. The 4WLR does not contain a digital decoder and therefore cannot be switched via digital function keys. Advantages at a glance Especially for modernising LGB RhB express coaches Replacement for the factory analogue lighting control Integrated voltage buffer to reduce light flickering Four light outputs for the existing coach lighting Two MiniCT sockets for table lighting Track connections for both bogies Manual on/off switch, no programming For analogue DC voltage and DCC track voltage Contents supplied: two eMOTION 4WLR coach lighting controls and operating instructions. Installation note: replacement requires soldering. Observe the connection assignment and load limits given in the operating instructions.

Selling price: CHF 44.90 RRP CHF 50.00

On order, lead time to be confirmed

LED headlight set (6/pack)
Massoth 8129510
LED headlight set (6/pack)

The LED headlight set includes six warm white LEDs (5 mm) with a pre-assembled cable to equip a locomotive model (e.g. PIKO) on both sides with triple headlights.

Selling price: CHF 21.90 RRP CHF 23.90

On order, lead time to be confirmed

10% off the recommended price
LED tail lamp set (4/pack)
Massoth 8129520
LED tail lamp set (4/pack)

The tail light set contains 4 red LEDs (5 mm) including a pre-assembled cable to equip a locomotive model (e.g. PIKO) on both sides with two red tail lights.

Selling price: CHF 15.90 RRP CHF 17.70

On order, lead time to be confirmed

LED spots (4/pack)
Massoth 8129530
LED spots (4/pack)

This set contains 4 warm white LED spots that can be placed individually in any locomotive or wagon model.

Selling price: CHF 21.90 RRP CHF 24.30

On order, lead time to be confirmed

10% off the recommended price
Christmas tree 2 cm (3/pack)
Massoth 8129580
Christmas tree 2 cm (3/pack)

Following the great demand for the Christmas tree for Gauge G (5 cm), a Christmas tree (2 cm) is also being released for smaller gauges, e.g. H0. It is also suitable for Gauge G as a small Christmas tree. With nine orange LEDs, pre-configured for connection to AC, DC and DCC.

Selling price: CHF 23.90 RRP CHF 26.70

On order, lead time to be confirmed

10% off the recommended price
Christmas tree 5 cm (2/pack)
Massoth 8129590
Christmas tree 5 cm (2/pack)

Every garden railway enthusiast will be familiar with the steam locomotives that run before Christmas, particularly on the Saxon narrow-gauge railways, with an illuminated Christmas tree mounted on the front buffer beam or in front of the smoke box door. On the prototype, simple metal plates with a matching colour scheme and appropriate lighting elements are attached to the front buffer beam or in front of the smoke box door, thus creating a festive atmosphere in the snow-covered landscape.

Selling price: CHF 17.90 RRP CHF 20.00

On order, lead time to be confirmed

10% off the recommended price
DiMAX radio conversion set 2.4GHz
Massoth 8130010
DiMAX radio conversion set 2.4GHz

The DiMAX radio conversion set 2.4GHz consists of the 8131001 DiMAX radio receiver 2.4GHz and the 8131901 DiMAX radio transmitter 2.4GHz. This allows for an affordable entry into the new radio system. The operating instructions can be found on the relevant product page.

Selling price: CHF 228.00 RRP CHF 253.80

On order, lead time to be confirmed

10% off the recommended price
DiMAX 2.4GHz radio receiver
Massoth 8131001
DiMAX 2.4GHz radio receiver

The new DiMAX radio receiver operates on the 2.4GHz frequency internationally and can therefore be used worldwide. It supports up to 4 radio users and can be used with both Central stations with Massoth bus (DiMAX 800Z, 1200Z, 1210Z, LGB 55006 and PIKO 35010) and analogue controllers (LGB 51070, 51079 or PIKO 35002). The range is up to 100 metres in the open air. For the first time, the classic whip antenna is no longer required, as it is internally mounted.

Selling price: CHF 144.00 RRP CHF 160.50

On order, lead time to be confirmed

DiMAX 2.4GHz radio transmitter
Massoth 8131901
DiMAX 2.4GHz radio transmitter

This retrofit wireless transmitter can equip all navigators currently on the market with the latest 2.4GHz radio technology. This ensures that the hand controller remains up to date in the future. The 2.4GHz wireless transmitter requires at least Navigator firmware version 2.2.

Selling price: CHF 98.90 RRP CHF 109.80

On order, lead time to be confirmed

DiMAX radio receiver EU II (spare part)
Massoth 8133109
DiMAX radio receiver EU II (spare part)

In addition to the DiMAX EU radio transmitter (8133301), the circuit board including the antenna (without housing) is now also available as a spare part for the corresponding DiMAX EU radio receiver II (8133101). This makes it easy for customers to continue operating and maintaining existing DiMAX digital layouts with the old radio system, even after many years.

Selling price: CHF 119.00 RRP CHF 131.90

On order, lead time to be confirmed

Radio transmitter EU pro (spare part)
Massoth 8133301
Radio transmitter EU pro (spare part)

The DiMAX radio transmitter has an extended range (up to 100 m) and can be retrofitted in the Navigator. A small hole through the housing wall is required.

Selling price: CHF 94.90 RRP CHF 105.30

On order, lead time to be confirmed

DiMAX Navigator 2.4GHz
Massoth 8134801
DiMAX Navigator 2.4GHz

Since 2019, the DiMAX Navigator has been supplied with 2.4GHz radio technology. The 2.4GHz radio system allows international use and reduces the product range to a single transmitter. The range is comparable to the previous radio system. The DiMAX Navigators 8134801 are already equipped from the factory with a 2.4GHz radio chip onboard; a radio interface is no longer present. All Navigators currently on the market can be equipped with the retrofit transmitter 8131901. This ensures that the Navigators remain up to date technically in the future.

Selling price: CHF 298.00 RRP CHF 330.90

On order, lead time to be confirmed

DiMAX Navigator 2.4GHz (Black Edition)
Massoth 8134802
DiMAX Navigator 2.4GHz (Black Edition)

Enjoy boundless freedom with the DiMAX Navigator. This handheld controller offers a range of functions that goes far beyond the operating options of handheld controllers to date. One highlight is that, for example, locomotives can be driven and points switched at the same time. For maximum operating enjoyment, the housing has been optimally shaped on ergonomic principles and the centre of gravity balanced so that it sits perfectly in the hand. Thanks to the symmetrical cross-section of the housing, the DiMAX Navigator is equally well suited to left-handed and right-handed users and can be operated optimally. A large, clearly arranged graphic display with backlighting provides comprehensive information on the locomotive currently being controlled, in a freely selectable language. This handheld controller is also equipped with switchable and dimmable blue/white keyboard lighting, which ensures running around the clock. The rotary knob is lit in different colours depending on the function. All locomotives from volume manufacturers available on the market can be shown on the LCD with the matching symbol and an individual name. The individual functions, the light symbol and the current speed step are also shown on the display. Since 2019 the DiMAX Navigator has been supplied with 2.4GHz radio technology. The 2.4GHz radio system allows international use and reduces the product range to a single transmitter. The range is comparable to that of the previous radio system. The DiMAX Navigators 8134801 are already fitted at the factory with a 2.4GHz radio chip on board, and a radio interface is no longer present. All Navigators previously on the market can be fitted with the retrofit transmitter 8131901. The Navigators will therefore remain technically up to date in future too. Features simple to use, ergonomically shaped large, easily legible graphic display adjustable backlighting easy to read in sunlight suitable for left-handed and right-handed users more than 10 language packs available to download manual in German and English easy for children to use (incl. child lock) illuminated rotary knob with status detection individual locomotive name per address 2 operating modes for the rotary knob for NMRA/DCC and Motorola operation 14/28/128 speed steps 99 functions per locomotive (F0 to F28 + 60 BS) parallel and serial function data up to 240 locomotive images (narrow gauge and standard gauge) control of 2 locomotives at the same time 2 STOP buttons (programmable STOP commands) radio and cable operation possible (depending on the system) various programming modes display of system power and system load point switching commands (with history) up to 32 routes programmable suitable for the following bus systems*: DiMAX (Massoth), XpressNet V 3.6, LocoNet

Selling price: CHF 298.00 RRP CHF 330.90

On order, lead time to be confirmed

10% off the recommended price New
DiMAX Navigator (Orange Edition)
Massoth 8134803
DiMAX Navigator (Orange Edition)

The popular DiMAX Navigator is now available in a bright orange colour variant! It is the central hand controller for your model railway – for driving, switching and programming. With an open radio interface for 2.4 GHz or 433 MHz, plug-and-play retrofitting and full functionality even without a radio module. Stylish, flexible, future-proof – your Navigator, now in orange!

Selling price: CHF 218.00 RRP CHF 242.70

On order, lead time to be confirmed

Switched-mode power supply 19V 4.7A
Massoth 8135301
Switched-mode power supply 19V 4.7A

A small, powerful switched-mode power supply, ready-made for connection to the DiMAX PC module or a small Central Station.

Selling price: CHF 54.90 RRP CHF 60.90

On order, lead time to be confirmed

DiMAX switched-mode power supply 24V | 12.5A (DE | Germany)
Massoth 8135611
DiMAX switched-mode power supply 24V | 12.5A (DE | Germany)

The DiMAX 24 V | 12.5 A switched-mode power supply is the ideal power feed, precisely matched to the DiMAX product range (e.g. Digital Central Station 1210Z or Digital Booster 1202B). It is also suitable for other applications requiring consistently high power.

Selling price: CHF 168.00 RRP CHF 186.30

On order, lead time to be confirmed

DiMAX switched-mode power supply 24V | 12.5A (CH | Switzerland)
Massoth 8135612
DiMAX switched-mode power supply 24V | 12.5A (CH | Switzerland)

The DiMAX switched-mode power supply 24V | 12.5A is the ideal power supply, precisely matched to the DiMAX product range (e.g. Digital Central Station 1210Z or Digital Booster 1202B). It is also suitable for other applications where a consistently high output is required.

Selling price: CHF 168.00 RRP CHF 186.30

On order, lead time to be confirmed

10% off the recommended price
DiMAX 1210Z digital control panel
Massoth 8136501
DiMAX 1210Z digital control panel

Facelift version 2021 of the popular 12 ampere garden railway command station with a new power output stage, optimised for operation with the DiMAX 1200T switched-mode power supply, achieving minimal power losses under full and partial load. Adjustable output voltage 14-22 volts; track current 4, 7 or 12 amperes. USB interface for PC control and automation, as well as firmware update for the command station and connected bus components. Supports locomotive addresses up to 10239, 14,28,128 speed steps, parallel and serial functions, F0 to F28 and 99 Binary State functions, automatic functions, etc.

Selling price: CHF 763.00 RRP CHF 847.80

On order, lead time to be confirmed

10% off the recommended price
DiMAX 1202B digital booster
Massoth 8137501
DiMAX 1202B digital booster

The DiMAX 1202B digital booster is a modern and powerful digital booster. With two separate output stages of 6 amps running current each, it offers ample reserves for 2 additional track sections on the model railway layout. If the 6 amps per track section are not sufficient, the two output stages can be connected together on the output side to form one output stage of 12 amps. The track voltage can be set in 5 steps: 14, 16, 18, 20 and 22 volts. A switched-mode power supply of 18-24 volts (DC) with sufficient power (min. 12A) is required for the power supply, for example the DiMAX 1200T switched-mode power supply (8135501) with up to 15 amps peak power. All desired settings are made with easy-to-use buttons on the front of the booster. A clear LED display shows the current settings and the operating state. With its different connection options, the booster can be used with most digital systems: booster bus socket for connection to Massoth / DiMAX digital command stations booster bus socket for connection to LGB MZS II and III digital command stations C-D-E terminal (e.g. for Lenz, Tams, Roco, etc.) Please observe the separate CDE usage note! Märklin CAN* (for operation on Märklin CS 2 / CS 3) is fully integrated from production year 2019 (new in 2019) direct track signal tap via terminals C, D for all digital command stations that do not provide a usable booster bus It can be used regardless of the data format and can therefore be operated, in addition to NMRA/DCC, with Motorola, Selectrix, etc., for example. The booster supports the following operating modes: normal running/booster mode braking booster function with active pass-through of function commands RailCom Märklin CAN / MfX* The booster can be operated on the Märklin CS II / III Central Station as a running booster. The matching connection cable 8312086 DiMAX Booster CAN bus cable for Märklin CS is not included in the delivery. MfX feedback is not available at present and is to be retrofitted at a later date with an additional module.

Selling price: CHF 537.00 RRP CHF 596.90

On order, lead time to be confirmed

10% off the recommended price
Busbar
Massoth 8138001
Busbar

Connect up to 5 additional bus components to your Central Station. Compatible with MZS. A control light indicates operational readiness.

Selling price: CHF 31.90 RRP CHF 35.60

On order, lead time to be confirmed