Accessories
The MASSOTH Pendulum Automation 8142010 enables fully automatic shuttle operation between two terminal stations. The starting and braking times as well as the dwell time can be adjusted individually to ensure particularly realistic running. With a load capacity of up to 5 A, the module is also suitable for powerful locomotives and complete trains. The Pendulum Automation can be mounted protected in the LGB buffer stop 10310; the required fixing material and the insulating track connectors are included in the contents supplied. The product is intended exclusively for analogue operation with adjustable DC voltage and is not suitable for digital operation.
On order, lead time to be confirmed
Powerful 3 amp locomotive decoder with a total load rating of four amps and 8 function outputs, suitable for locomotives with up to two motors. The eMOTION XL locomotive decoder is a high-quality decoder for large-scale and garden railways, for NMRA DCC and all generations of the LGB® MZS. With its various connection options and adjustable special functions, it can drive, among other things, speed-dependent sound module controls or uncoupling drives of the most varied technical designs. Simple function mapping, a freely programmable shunting speed and modern load control for digital and analogue operation (patent pending) round off the range of functions. Of course, analogue or digital operation is recognised automatically. The eMOTION XL locomotive decoder also supports automatic detection between serial (LGB® MZS) and parallel (NMRA DCC) function data processing. The features of the eMOTION XL locomotive decoder at a glance: 14, 28 and 128 speed steps 256 internal speed steps 10239 locomotive addresses programmable speed curve starting, medium and maximum speed (as well as delay times) serial and parallel control for all light and function outputs incl. LGB® P sound updates digital and analogue operation with automatic detection compatible with NMRA DCC and LGB® MZS (all generations) latest-generation load control (for digital and analogue operation) adjustable motor frequency (70Hz – 16 kHz) 3 light connections (front, rear, interior) max. 0.3A each 6 function outputs (all with configurable special functions) max. 0.6A each light and function outputs dimmable and can be activated in analogue mode programmable flashing light, short-time and clock generator functions 2 additional contact inputs for future functions (reserved) shunting speed (with free function mapping) simple function mapping for all function outputs all function outputs freely addressable (F1 to F16) total load rating of 4 amps (motor output stage and function outputs) motor output stage rated for 3 amps (suitable for up to 2 motors of 1.5 amps each) voltage buffer connection integrated for smooth running (accessory: 8151001 or 8151501) overload and temperature protection for the motor and function outputs reset function for all CV values software can be updated CV reading CV writing bitwise CV writing indirect CVs (via register programming for older digital systems) direct register programming (CV 1 – CV4) POM – Program on Main (programming on the main track)
On order, lead time to be confirmed
The Powercap 200 (ex. nano), with its miniature design, is suitable for particularly small, single-motor models, including field railway locomotives, and buffers for a few seconds – enough to get a small locomotive over a dirty section of track. With its minimal size of just 25 x 17 x 15 mm, it can be fitted almost anywhere. The three-core connecting cable (200 mm) can be shortened individually.
On order, lead time to be confirmed
Following the introduction of the Powercap 200, the more powerful Powercap 900 now complements the product range. Despite its compact dimensions of just 30x30x16mm, it is capable of buffering a single-motor locomotive drawing 600mA for up to 6 seconds, and for a considerably longer period when the current consumption is lower. It replaces item 8151601 Powercap micro. Available from October 2024.
On order, lead time to be confirmed
Following the introduction of the Powercap 200 and Powercap 900, the more powerful Powercap 2300 completes the product range. Despite its compact dimensions of just 44x23x32mm, it is able to buffer a two-motor locomotive with 2000mA for up to 12 seconds, and considerably longer with lower current consumption. It replaces 8151701 Powercap maxi. Available from April 2025.
On order, lead time to be confirmed
24.03.2025 – 8151701 is replaced by 8151321 Powercap 2300 The new Powercap maxi replaces the Goldcap buffer 8151501. The size has been reduced by about 40 %. Reserve of up to 30 seconds! The eMOTION Powercap maxi bridges brief interruptions in the track voltage. It was designed especially for twin-motor locomotives. The motor and the special functions are supplied from the storage unit during this interruption. Locomotives can therefore cross common crossings or insulated sections without stopping. The buffering time is up to 30 seconds, depending on the connected load, the current speed and the charge level of the storage unit. Universal digital use & intelligent technology Thanks to its well-thought-out design and the use of special capacitors, the Powercap maxi, with integrated charging circuit and charging function cut-out during decoder programming, is suitable for use with almost all digital decoders that provide the Decoder + and Decoder – contacts directly. (tested with: Massoth, LGB®, Lenz©, Zimo©) Direct connection of the Powercap maxi to decoders of the eMOTION series The Powercap maxi is particularly suitable for connection to decoders of the eMOTION series. The Decoder + (red) and Decoder – (black) contacts are used as usual. The third wire (white) is used to switch off the charging function when the contact is open. This function is handled by a function output of the eMOTION decoder. When the decoder is being programmed or read, the charging function is switched off automatically. The programming procedure can therefore be carried out without any problem. With third-party or older decoders, the switch also included in the delivery is used. The performance data are: Buffering time up to 30 seconds (depending on load) maximum buffer current 3A maximum charging current 400mA Operating voltage 6-20 V DC (max. 24 V)
On order, lead time to be confirmed
The new 10FX servo decoder is an innovative further development of the long-proven and versatile 8FS/8FX decoder generation. It provides sufficient power reserves for controlling up to four servos, two uncouplers or pantograph drives, and other consumers with a wide range of functions, thanks to its ten function outputs suitable for analogue operation, which have a total current capacity of two amperes. Additionally, a voltage buffer is integrated, ensuring smoother operation of the connected servos and uncouplers. With these performance specifications, there is nothing left to desire.
On order, lead time to be confirmed
Compact and powerful DCC function decoder with four reinforced function outputs, each capable of handling a peak load of 1 ampere. The total current capacity is also 1 ampere. The solder connections are located on the underside of the small 25 x 16 mm circuit board. A removable mounting bracket is included. The pack contains two pieces. Available from October 2024.
On order, lead time to be confirmed
DCC light decoder with four function outputs specifically designed for installation in RhB express coaches as a replacement for the analogue controls fitted as standard. All cables in the coach can be soldered to the pads on the underside. Two additional sockets allow connection of additional elements. A high-power voltage buffer is already fitted as standard. (Image shows development model)
On order, lead time to be confirmed
Completely newly developed and even more powerful is the new XXL II locomotive decoder, suitable for locomotives with up to 4 motors, with up to 8 amperes of running current and 10 amperes of total current. Highlights: New function mapping, F0-F127, 10 function outputs, 2 servo connections, bus connection for MASSOTH/LGB and SUSI, overload and temperature protection for motor and function outputs. Updatable.
On order, lead time to be confirmed
Universal 1.8 amp locomotive decoder with 8 function outputs, suitable for locomotives with 1 motor. The eMOTION L decoder is a compact locomotive and function decoder, optimally designed for the demands of large-scale operation. In addition to the motor output for single-motor locomotives, it offers up to 8 programmable function outputs. The eMOTION L decoder offers excellent digital and analogue running characteristics. Its good analogue capability is also worth stressing, allowing stable operation from about 7 to 8 volts. With an additional voltage buffer it can do its job even more reliably in analogue and digital operation, and thereby avoids dropouts caused by dirty spots on the track. The features of the eMOTION L locomotive decoder at a glance: locomotive decoder for digital and analogue operation 14, 28 and 128 speed steps motor output rated for 1.8A connection for a model-making servo bus interface for MASSOTH and LGB® modules programmable speed curve starting, medium and maximum speed (as well as delay times) adjustable serial and parallel control for all light and function outputs control of parallel data updates (LGB®) digital and analogue operation with automatic detection compatible with NMRA DCC and LGB® MZS (all generations) latest-generation load control (for digital and analogue operation) adjustable motor frequency (90Hz – 23.5 kHz) 2 light connections (front, rear) max. 0.5A each 6 function outputs (2 of 0.5A each, 4 of 50mA each) light and function outputs dimmable and can be activated in analogue mode programmable flashing light and short-time functions shunting speed and delay times can be switched by function key simple function mapping with direction assignment all function outputs freely addressable (F1 to F16) voltage buffer connection integrated for smooth running (accessory: 8151001 or 8151501) overload and temperature protection for the motor and function outputs reset function for all CV values CV reading CV writing bitwise CV writing indirect CVs (via register programming for older digital systems) direct register programming (CV 1 – CV4) POM – Program on Main (programming on the main track)
On order, lead time to be confirmed
Particularly small 1.2 amp locomotive decoder with 6 function outputs, suitable for small locomotives with 1 motor. The eMOTION M locomotive decoder is an NMRA/DCC-compatible locomotive decoder which, with its particularly small dimensions, is suitable for retrofitting and direct connection to a gearbox (4 pins) in very small locomotives: e.g. small garden railway locomotives, but also locomotives of smaller gauges, e.g. H0. Its total load rating is max. 1.8 amps. The decoder has 5 function outputs. With an additional voltage buffer it can do its job even more reliably in analogue and digital operation, and thereby avoids dropouts caused by dirty spots on the track. The features of the eMOTION M locomotive decoder at a glance: locomotive decoder for digital and analogue operation 14, 28 and 128 speed steps motor output rated for 1.2A programmable speed curve starting, medium and maximum speed (as well as delay times) adjustable serial and parallel control for all light and function outputs control of parallel data updates (LGB®) digital and analogue operation with automatic detection compatible with NMRA DCC and LGB MZS (all generations) latest-generation load control (for digital and analogue operation) adjustable motor frequency (70Hz – 16 kHz) 2 light connections (front, rear) max. 0.3A each 5 function outputs (2 x 0.3A, 2 x 0.05A and 1 x 0.01A (5V)) connection for a model-making servo light and function outputs dimmable and can be activated in analogue mode programmable flashing light and short-time functions shunting speed and delay times can be switched by function key simple function mapping with direction assignment all function outputs freely addressable (F1 to F16) voltage buffer connection integrated for smooth running (accessory: 8151001 or 8151501) overload and temperature protection for the motor and function outputs reset function for all CV values CV reading CV writing bitwise CV writing indirect CVs (via register programming for older digital systems) direct register programming (CV 1 – CV4) POM – Program on Main (programming on the main track)
On order, lead time to be confirmed
Universal 4-function function decoder A universal 4-function function decoder for controlling and switching standard motor and point motors: regular coil point motors (2- and 3-wire) with pulse switching or genuine motor point motors. Four protected contact inputs allow switching via manual contacts, e.g. from a control panel or signal box or track contact, alternatively up to 8 light functions. The settings are made via CV programming (as well as POM).
On order, lead time to be confirmed
Universal switching decoder for points, motors and switching tasks The Massoth 4K III switching decoder is a versatile universal decoder for the digital control of points, motor drives and numerous other switching functions on your model railway layout. Four independent switching outputs allow the direct connection of up to four point motors or eight freely usable switching outputs. In addition to classic garden railway point motors, the switching decoder also supports twin-coil drives and motorised point drives. The powerful output stages also allow motors, lamps or other loads to be switched reliably. A particular highlight is the eight integrated contact inputs. They allow switching operations to be triggered not only digitally but also directly via push buttons, track contacts or reed contacts. Points and other functions can thus be switched fully automatically or manually. Alternatively, these connections can be used as status LED outputs. The switching decoder can be operated using both point addresses and locomotive addresses. In locomotive mode, extensive functions are available, such as freely assignable function keys, flashing functions, short-time functions (monoflop), PWM output voltage and automatic switch-back functions. The decoder is therefore also excellently suited to lighting, signalling and automation tasks. For particularly convenient commissioning, the 4K III switching decoder has an integrated programming load. All CVs can therefore be read and written directly without having to connect an additional load. CV reading, CV writing, bitwise programming and Programming on Main (PoM) are supported. Of course, the decoder's firmware can be updated, bringing it up to date at any time. Highlights Digital universal switching decoder for DCC layouts Four switching channels for up to four point or motor drives Eight freely usable switching outputs Eight programmable contact inputs for push buttons, reed contacts or track contacts Contact inputs can alternatively be used as status LED outputs Suitable for single-coil and twin-coil drives Also suitable for switching motors, lamps and other loads Operation via point or locomotive addresses Freely programmable function assignment in locomotive mode Flashing, monoflop and automatic functions Adjustable PWM output voltage Automatic switch-back function Integrated programming load for convenient CV reading and writing Programming via CV and PoM Firmware update via the Massoth Service Tool (MST) Overload protection on all outputs Made in Germany
On order, lead time to be confirmed
1-channel point decoder, which disappears directly into the track with its latest housing design. Without terminals, with only four lead-out cables (30 cm), it can be used outdoors all year round. The overload protection prevents damage to the electronics. New are 2 contact inputs, which can be used additionally (incl. direct programming function via point switch command for simpler digital systems, e.g. MZS II).
On order, lead time to be confirmed
A completely newly developed function decoder with an expanded range of functions and, for the first time, a service-friendly plug-in connecting cable. In addition to the powerful switching output, the function decoder also features additional contact inputs.
On order, lead time to be confirmed
The DiMAX LED control module provides 16 function outputs for driving LEDs for various pre-programmed light effects (e.g. house lighting, traffic lights, flashing indicators, construction site beacons) and various signal aspects (DB, DR, Switzerland) with four signal aspects each, and can be operated digitally and analogously*.
On order, lead time to be confirmed
Switch the reversing loop on your layout to prevent short circuits, thereby protecting your digital system and rolling stock. Only with this technology can multiple reversing loops be operated simultaneously! Switching currents up to 15 amperes (peak current). With soft-start function when the train is standing at the isolation point. Regular short-circuit operating mode is of course also supported. In addition, the reversing loop module can be used in analogue operation!
On order, lead time to be confirmed
The DiMAX FB feedback module is used to detect events on the model railway layout, such as reporting a train on a specific track or the feedback from a switched point. The module monitors 16 contact inputs (compared to the previous 8 in 8170001). When a change occurs at an input, a command is sent to the central station via the DiMAX FB feedback bus. Depending on the module’s programming, this can trigger various actions. Either a point is switched directly, an automatic function in the DiMAX central station is started, or the feedback is forwarded to a PC.
On order, lead time to be confirmed
A completely newly developed electronic track contact for the DiMAX digital system with a novel sensor. The classic EPL control system is not supported. The contents supplied include two track contacts.
On order, lead time to be confirmed
The DiMAX FB occupancy detection module 8170510 monitors four independent track sections. As soon as a train is on an occupancy detection section, it is reported as occupied. The continuous current is 6A (peak current 8A). The trigger current for occupancy detection is between 2mA and 100mA and is individually adjustable in five stages. The occupancy detection module is suitable for both booster and reversing loop operation. Detailed connection diagrams are in the bilingual manual supplied with the product.
On order, lead time to be confirmed
With "intermittent train control" (PZB), the modern "full-size" railway today controls its operating processes to monitor and influence rail-bound vehicles by transmitting position-related data from the track to the train. In currently common systems, for example, it is monitored, among other things, that a signal showing "stop" has not been passed. Massoth has adopted precisely this proven principle with the innovative DiMAX-PZB/IR control system for the garden railway sector, and with just three components (prerequisite: SUSI-BIDI capability of the locomotive decoder) transmits data relevant to orderly operation from the track to the locomotives by infrared command. This does not merely execute train-controlled functions on the layout; genuine position-related commands are transmitted to the train. Enjoy the automatic stop of the train in front of a red signal and the continuation of the journey at the "clear" signal aspect, function commands for groups of trains, automatic triggering of sound, pulsed smoke generator and other decoder features, and many other functions. Complex wiring or isolating gaps in the track, as well as laying bus and feedback contact cables for PC control, are finally a thing of the past with DiMAX PZB. DiMAX PZB/IR offers the keen garden railway enthusiast many possibilities, for example: Switching signals and the associated train control Braking and stopping without braking section/modules Further functions are in preparation, such as: Locomotive position detection and feedback without track contact / feedback detector Triggering of sounds without track magnet or reed contact Feedback functions (e.g. Railcom© or MfX©) can be integrated in addition. The system components need no additional wiring; the power supply already present via the track is sufficient for operation. The permanent data transmission takes place independently of the digital track signal, by infrared signal from the signal decoder in the track to the vehicle fitted with a receiver as it passes over the transmitter. This can, for example, switch a function in the vehicle (light, steam, etc. on/off) or trigger an automatic action such as the bell ringing before a level crossing, but also a timed station stop. The data to be transmitted with PZB/IR can, however, also be influenced by a digital command on the track, if, for example, a signal aspect switched via the Navigator is transmitted to the vehicle in this way and the locomotive is thereby stopped in front of the signal showing "red". The PZB system components are supplied in sets with different compositions.
On order, lead time to be confirmed
The red lock-out prevents a train passing in the opposite direction from being stopped at a red signal. With "intermittent train control" (PZB), the modern "full-size" railway today controls its operating processes to monitor and influence rail-bound vehicles by transmitting position-related data from the track to the train. In currently common systems, for example, it is monitored, among other things, that a signal showing "stop" has not been passed. Massoth has adopted precisely this proven principle with the innovative DiMAX-PZB/IR control system for the garden railway sector, and with just three components (prerequisite: SUSI-BIDI capability of the locomotive decoder) transmits data relevant to orderly operation from the track to the locomotives by infrared command. This does not merely execute train-controlled functions on the layout; genuine position-related commands are transmitted to the train. Enjoy the automatic stop of the train in front of a red signal and the continuation of the journey at the "clear" signal aspect, function commands for groups of trains, automatic triggering of sound, pulsed smoke generator and other decoder features, and many other functions. Complex wiring or isolating gaps in the track, as well as laying bus and feedback contact cables for PC control, are finally a thing of the past with DiMAX PZB. DiMAX PZB/IR offers the keen garden railway enthusiast many possibilities, for example: Switching signals and the associated train control Braking and stopping without braking section/modules Further functions are in preparation, such as: Locomotive position detection and feedback without track contact / feedback detector Triggering of sounds without track magnet or reed contact Feedback functions (e.g. Railcom© or MfX©) can be integrated in addition. The system components need no additional wiring; the power supply already present via the track is sufficient for operation. The permanent data transmission takes place independently of the digital track signal, by infrared signal from the signal decoder in the track to the vehicle fitted with a receiver as it passes over the transmitter. This can, for example, switch a function in the vehicle (light, steam, etc. on/off) or trigger an automatic action such as the bell ringing before a level crossing, but also a timed station stop. The data to be transmitted with PZB/IR can, however, also be influenced by a digital command on the track, if, for example, a signal aspect switched via the Navigator is transmitted to the vehicle in this way and the locomotive is thereby stopped in front of the signal showing "red". The PZB system components are supplied in sets with different compositions.
On order, lead time to be confirmed
With "intermittent train control" (PZB), the modern "full-size" railway today controls its operating processes to monitor and influence rail-bound vehicles by transmitting position-related data from the track to the train. In currently common systems, for example, it is monitored, among other things, that a signal showing "stop" has not been passed. Massoth has adopted precisely this proven principle with the innovative DiMAX-PZB/IR control system for the garden railway sector, and with just three components (prerequisite: SUSI-BIDI capability of the locomotive decoder) transmits data relevant to orderly operation from the track to the locomotives by infrared command. This does not merely execute train-controlled functions on the layout; genuine position-related commands are transmitted to the train. Enjoy the automatic stop of the train in front of a red signal and the continuation of the journey at the "clear" signal aspect, function commands for groups of trains, automatic triggering of sound, pulsed smoke generator and other decoder features, and many other functions. Complex wiring or isolating gaps in the track, as well as laying bus and feedback contact cables for PC control, are finally a thing of the past with DiMAX PZB. DiMAX PZB/IR offers the keen garden railway enthusiast many possibilities, for example: Switching signals and the associated train control Braking and stopping without braking section/modules Further functions are in preparation, such as: Locomotive position detection and feedback without track contact / feedback detector Triggering of sounds without track magnet or reed contact Feedback functions (e.g. Railcom© or MfX©) can be integrated in addition. The system components need no additional wiring; the power supply already present via the track is sufficient for operation. The permanent data transmission takes place independently of the digital track signal, by infrared signal from the signal decoder in the track to the vehicle fitted with a receiver as it passes over the transmitter. This can, for example, switch a function in the vehicle (light, steam, etc. on/off) or trigger an automatic action such as the bell ringing before a level crossing, but also a timed station stop. The data to be transmitted with PZB/IR can, however, also be influenced by a digital command on the track, if, for example, a signal aspect switched via the Navigator is transmitted to the vehicle in this way and the locomotive is thereby stopped in front of the signal showing "red". The PZB system components are supplied in sets with different compositions.
On order, lead time to be confirmed