Electronics
Powerful analog servo with plastic gear. - Connector type: JR - Positioning angle: 90° - Response velocity: 0.12 to 0.15 s for 60° - Voltage: 4.8 to 6 V - Torque: 3.5 to 4.4 kg.cm - Weight: 43 g - Dimensions: 40.7 x 20.5 x 39.5 mm - Cable length: 300 mm - Connection to Servo Control Art. 180725
On order, shipped within 4-5 days
Updated for easy handling! Lighting kit featuring LED technology for the »Ferris wheel«, Art. 140312. With this set, all 20 gondolas of your Ferris wheel will shine in five different, constantly glowing colours (orange, yellow, green, red, blue). Lighting for the entrance arch with three LEDs is also included in the set.
On order, shipped within 4-5 days
The smoke generator uses a paraffin-free evaporation system and contains no harmful substances. It therefore ensures reliable and clean smoke production whilst offering a high level of operational safety. A built-in fan allows you to adjust the smoke output – from a fine mist to clearly visible plumes of smoke. Thanks to this new technology, the miniature world looks so much more authentic! Technical specifications: Operating voltage: 12–16 V AC/DC, inrush current: 1.3 A, current consumption after warm-up phase: 0.3 A
Pre-order, release expected in November 2026
For worldwide use. USB cable with open cable end for power supply of operating models via an existing type-A USB port. Particularly suitable in the carnival area, for example for powering model such as the »Daemonium Ghost Train«, Art. 140418, »Sala Motor-Drome Motorcycle sheer wall show«, Art. 140336, or for lighting a ferris wheel. Technical data: - Connections: > 1 x USB 2.0 type-A plug > 2 x open cable ends (VCC/red/5 V and GND/black/earth) - Wire cross section: 28 AWG - Cable diameter: approx. 4.5 mm - Cable length without connections: approx. 2,000 mm - Colour: black Please be sure to check the power of the USB port to avoid overloading.
On order, lead time to be confirmed
Model of a widely-used mounted light with flat metal lattice mast. Particularly suitable for illuminating rail-side scenes such as railway stations, depots and track fields. This two-light lamp is equipped with long-life LED technology. The product is ready for connection to 12 V direct current (DC). Use the »Transformer«, Art. 180699, to operate the lamp. Height: 80 mm. Light colour: warm white. Contents: 3 units.
On order, shipped within 4-5 days
A modern design trapeze light. Particularly suitable for designing city, street and industrial scenes, but also railway scenes. The mast is made of metal. The intricate two-light lamp is equipped with long-life LED technology. The product is ready for connection to 12 V direct current (DC). Use the »Transformer«, Art. 180699, to operate the lamp. Height: 60 mm. Light colour: warm white. Contents: 3 units.
On order, shipped within 4-5 days
Track feed clips (2 poles) can only be connected to the rail connectors on each rail joint. Saves a siding.
On order, shipped within 10-15 days
Track feed clip (1 pole). Track feed clips can only be connected to the rail connectors on each rail joint such as infront or behind the electrical cut-off point or with signal circuits.
On order, shipped within 10-15 days
Interior lighting unit for diesel multiple unit "Pendolino" 4415/4418.
On order, shipped within 10-15 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.7 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
On order, shipped within 10-15 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. Length of pigtail: 35 mm. For further technical specification, see the spec sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
On order, shipped within 10-15 days
Suitable for Gauge TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Decoder with wires and 8-pole plug. Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
On order, shipped within 10-15 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.7 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
For example in reversing loops.
On order, shipped within 10-15 days
Point switch to operate two points, or two double slips.
On order, shipped within 10-15 days
I. e. to operate four uncoupler tracks.
On order, shipped within 10-15 days
For example to turn power on/off to circuits, isolated sections or lighting, etc.
On order, shipped within 10-15 days
To reverse the direction of running.
On order, shipped within 10-15 days
To operate one three-way point.
On order, shipped within 10-15 days
2 pole for 10 connections each side.
On order, shipped within 10-15 days
Connector panel to extend and connect up to 10 wires.
On order, shipped within 10-15 days
The set can convert manually operated turnouts to electromagnetic turnouts. Remote control via control box. Can be used for standard, curved, three-way and double slip turnouts. Contents: 2 turnout motors, 1 switcher 6920.
On order, shipped within 10-15 days
LED interior lighting kit to replace the item 9445, 9457 and 9458. Thanks to buffer capacitors, flicker-free lighting can be guaranteed even during short power interruptions. For analogue and digital operation and direct current.
On order, shipped within 10-15 days