Decoders
The USB stick provides a wide selection of ready-to-play sounds.
On order, lead time to be confirmed
The new MP3 sound modules are very inexpensive components for playing sounds on the model railway layout. Sounds on your computer, whether you have downloaded them from the internet or created them yourself, can be simply loaded into the sound modules via a USB interface. One sound can be stored per module. Sound module for quick use with all the necessary accessories For analogue and digital model railways No interface or programmer needed The sound can be played once or in an endless loop. The sound is triggered by push button, switch contact or reed contact. An opto-isolated input is available for connecting electronic contact sensors. Art. no. 38110 MP3 sound module
On order, lead time to be confirmed
The new MP3 sound modules are very inexpensive components for playing sounds on the model railway layout. Sounds on your computer, whether you have downloaded them from the internet or created them yourself, can be simply loaded into the sound modules via a USB interface. One sound can be stored per module. Sound module for quick use with all the necessary accessories For analogue and digital model railways No interface or programmer needed The sound can be played once or in an endless loop. The sound is triggered by push button, switch contact or reed contact. An opto-isolated input is available for connecting electronic contact sensors. Art. no. 38130 MP3 sound module
On order, lead time to be confirmed
DigiTest is the new universal test and programming device for all decoders, sound modules and sound decoders. DigiTest is a stand-alone test device that is connected to a computer via a USB port. A digital command station is not required. It offers you the following functions: Testing of all DCC-capable decoders, sound decoders and sound modules Reading and programming of CVs Loading of new software versions into IntelliDrive 2 decoders and Piko V4.1 decoders All functions are conveniently monitored and carried out on the PC. DigiTest has a large number of connections so that all decoders can be tested. Programming track 6-pin (NEM 651) 8-pin (NEM 652) Next 18 (RCN-118) Next 18S (RCN-118) PluX (RCN-122) 21mtc (RCN-121) Terminal connection SUSI microSUSI As you can see, DigiTest also has a programming track connection. On a track connected to it, the CVs of decoders installed in vehicles can be read and programmed. Sound files can also be loaded into IntelliSound modules and decoders while installed, on the programming track, if an IntelliDrive 2 decoder is installed in the vehicle. On the programming track the IntelliDrive 2 decoders can also receive new software. Required operating system: Microsoft Windows 7, 8, 10 Art. no. 71000 DigiTest – Test and programming device with plug-in power supply
On order, lead time to be confirmed
SUSI distributor, 70 mm. This allows two sound modules to be connected to one decoder. The distributor can also be used as a connection extension.
On order, lead time to be confirmed
Item no. 71621 5 NEM 652 interface sockets
On order, lead time to be confirmed
Item no. 71651 5 interface plugs to NEM 652
On order, lead time to be confirmed
Connection board for the retrofitting of PluX decoders (PluX 8 and PluX 22) in locomotives with a DC motor. With connection option for SUSI and LISSY.
On order, lead time to be confirmed
IntelliDrive 2 energy store 1 F. The IntelliDrive energy stores bridge power interruptions caused by dirty rails and long turnout sequences. This means there is no more jerky running on dirty rails or when passing over turnout sequences. The sound no longer has dropouts either. The energy store can be used with all common decoders that have decoder ground GND and U+ (+20 V) connections after the rectifier. The charging circuit is controlled by a microprocessor, so there is no overload of the booster when the layout is switched on. All parameters can be set by CV programming. The energy store should be given the same address as the locomotive decoder. The 71810 is intended for locomotives with low current consumption. Size 17.5 x 12.5 x 8.5 mm.
On order, lead time to be confirmed
The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73236 ID2 Decoder, Next18
On order, lead time to be confirmed
The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73300 Decoder, microSUSI, Multi, DC, control, cable
On order, lead time to be confirmed
The standard decoders for small gauges are the 73xxx series. These decoders are available with connecting wires (73300), a 6-pin plug to NEM 651 (73310) and with a PluX12 interface (73340). This can be used, for example, to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73406 with connecting wires and 73416 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73340 Decoder, microSUSI, Multi, DC, control, PluX 12
On order, lead time to be confirmed
The standard decoders for small gauges are the 73105 series. These decoders are available with connecting wires (73106), a 6-pin plug to NEM 651 (73115) and with a PluX12 interface (73145). This can be used, for example, to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73405 with connecting wires and 73415 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73406 Mini decoder, microSUSI, Multi, DC, control, cable
On order, lead time to be confirmed
The standard decoders for small gauges are the 73105 series. These decoders are available with connecting wires (73105), a 6-pin plug to NEM 651 (73115) and with a PluX12 interface (73145). This can be used, for example, to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. It is even equipped with Intellimatic. Our new decoders 73405 with connecting wires and 73415 with a 6-pin plug to NEM 651 are intended for the smallest locomotives. They are distinguished by a very small size while achieving high performance. Thanks to the built-in protection mechanisms, these decoders are extremely robust even at this small size. All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC braking and extended function mapping, and can be updated on the track. For easy plug-in connection of a sound module, the decoders are equipped with a SUSI or microSUSI interface. On the Next18 decoder the SUSI connections are found on the pin header. Together with the IntelliSound-microModul or IntelliSound-kompaktModul, the result is an extremely small decoder-sound combination. Art. no. 73416 Mini decoder, microSUSI, Multi, DC, control, cable
On order, lead time to be confirmed
The functions: Six function outputs All outputs can be switched, flashed and dimmed depending on the direction of travel and on time Function mapping up to F44 On and off times for flashing outputs can each be set separately Second brightness level (dimming) switchable via function key Fade-in and fade-out outputs with adjustable fade time Adjustable neon lamp effect, energy-saving lamps, coupling control, PWM modulation programmable (e.g. Gyrolight, Marslight, etc.) RailCom Plus Data formats DCC and Motorola II Connection via cable + solder pads Programmable via CV (DCC) and via Motorola digital command station Load capacity up to 0.6 A, 0.6A per output Size 9.5 x 7.8 x 2.4 mm
On order, lead time to be confirmed
In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.
On order, lead time to be confirmed
In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.
On order, lead time to be confirmed
In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.
On order, lead time to be confirmed
In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with or without mfx®.
On order, lead time to be confirmed
Item no. 74320 IntelliDrive 2 digital decoder, 8-pin, NEM 652
On order, lead time to be confirmed
In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with and without mfx®.
On order, lead time to be confirmed
In the H0 range, we offer you the right decoder for every application – regardless of which interface you need, with or without mfx®.
On order, lead time to be confirmed
The functions: Six function outputs All outputs can be switched, flashed and dimmed depending on the direction of travel and on time Function mapping up to F44 On and off times for flashing outputs can each be set separately Second brightness level (dimming) switchable via function key Fade-in and fade-out outputs with adjustable fade time Märklin analogue operation with change of direction of travel on the Function H0 Adjustable neon lamp effect, energy-saving lamps, coupling control, PWM modulation programmable (e.g. Gyrolight, Marslight, etc.) RailCom Plus Data formats DCC and Motorola II Connection via cable + solder pads Programmable via CV (DCC) and via Motorola digital command station Load capacity up to 0.6 A, 0.3A per output Size 20 x 12 x 2.2 mm
On order, lead time to be confirmed
The digital decoder is the brain of your locomotive. It determines the running characteristics and switching options. A poorly chosen decoder can quickly spoil your enjoyment of the vehicle. IntelliDrive decoders are at the peak of technology and guarantee you optimal running characteristics.
On order, lead time to be confirmed