Electronic Accessories
Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0 / 5 , LokSound micro V4.0 / 5 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms . With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. Art.No. Delivery 50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit 50325 Loudspeaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber 50326 Loudspeaker 14mm x 12mm square, 8 Ohms, 1~2W, with integrated sound chamber 50330 Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber 50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber 50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber 50333 Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber 50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber
On order, shipped within 4-5 days
Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0 / 5 , LokSound micro V4.0 / 5 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms . With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. Art.No. Delivery 50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit 50325 Loudspeaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber 50326 Loudspeaker 14mm x 12mm square, 8 Ohms, 1~2W, with integrated sound chamber 50330 Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber 50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber 50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber 50333 Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber 50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber
On order, lead time to be confirmed
Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0 / 5 , LokSound micro V4.0 / 5 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms . With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. Art.No. Delivery 50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit 50325 Loudspeaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber 50326 Loudspeaker 14mm x 12mm square, 8 Ohms, 1~2W, with integrated sound chamber 50330 Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber 50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber 50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber 50333 Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber 50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber
On order, shipped within 4-5 days
Loudspeaker 32mm, rund, 100 Ohm, without sound chamber For the well-proven LokSound V3.5, LokSound micro V3.5 and LokSound V3.0 M4 decoders we offer loudspeakers in the following sizes: 2x13mm (50 Ohms each), 2x16mm (50 Ohms each), 16x25mmm, 20mm, 23mm, 28mm, 20x40mm and 40mm. By virtue of the internal design of the decoders, the speakers feature a specially customised impedance of 100 Ohms. Only these speakers may be used! Art.No. 50335 Loudspeaker 32mm, rund, 100 Ohm, without sound chamber Expires 50442 Loudspeaker 23mm, round, 100 Ohm, with sound chamber Expires 50444 Loudspeaker 40mm, round, 100 Ohm, with sound chamber Expires 50447 Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber Expires 50448 Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber Expires
On order, shipped within 4-5 days
Loudspeaker Visaton SC4.7ND, 41x70mm, square, 8 Ohms decoders work with loud speakers which have an impendance from 8-32 Ohms. ESU offers you a selection of the sizes 40mm, 57mm and 78mm includung sound chamber as well as some high-class Visation XL loudspeakers without sound chamber. Visaton loudspeakers offer a powerful bass and a high-quality audio playback, whereas ESU loudspeakers are also suitable for open-land vehicles due to their plastic membrane. 50336 50336 50337 50337 50446 Part No. 50322 Loudspeaker Monacor Sp6/4SQ, 59mm, round, 8 Ohms, for PIKO G/LGB Loks 50323 Loudspeaker 40mm round, 8 Ohms, with sound chamber for LokSound H0, LokSound XL 50324 Loudspeaker Visaton FRS 7, 70mm, round, 8 Ohms 50336 Loudspeaker Visaton SC4.7ND, 41x70mm, square, 8 Ohms 50337 Loudspeaker Visaton FRS5, 50mm, round 8 Ohms 50446 Loudspeaker 78mm, round, 8-32 Ohms, with sound chamber Expires
On order, shipped within 4-5 days
Loudspeaker Visaton FRS5, 50mm, round 8 Ohms decoders work with loud speakers which have an impendance from 8-32 Ohms. ESU offers you a selection of the sizes 40mm, 57mm and 78mm includung sound chamber as well as some high-class Visation XL loudspeakers without sound chamber. Visaton loudspeakers offer a powerful bass and a high-quality audio playback, whereas ESU loudspeakers are also suitable for open-land vehicles due to their plastic membrane. 50336 50336 50337 50337 50446 Part No. 50322 Loudspeaker Monacor Sp6/4SQ, 59mm, round, 8 Ohms, for PIKO G/LGB Loks 50323 Loudspeaker 40mm round, 8 Ohms, with sound chamber for LokSound H0, LokSound XL 50324 Loudspeaker Visaton FRS 7, 70mm, round, 8 Ohms 50336 Loudspeaker Visaton SC4.7ND, 41x70mm, square, 8 Ohms 50337 Loudspeaker Visaton FRS5, 50mm, round 8 Ohms 50446 Loudspeaker 78mm, round, 8-32 Ohms, with sound chamber Expires
On order, shipped within 4-5 days
Speaker set, Dual 11x15mm, Modular Soundbox kit for 28mm, 20x40mm, 16x35mm With our new modular speaker baffle set you can easily assemble your tailormade speaker baffle suitable for two miniature speakers. Both – diameter and height – can be individually adapted to suit your needs. Considerable audio pressure and excellent sound fidelity can be generated by employing two speakers wired in parallel. The popular 11x15mm sugar cube speaker with 8 Ohm impedance is supplied with a sealed mounting plate. First select one of the three base frames subject to the type of speaker you want to assemble, namely a circular frame with 28mm diameter or a rectangular type with either 16x35mm or 20x40mm. After you have inserted the speakers into the base frame you may now determine the height of the speaker baffle. The minimum height is 6mm, which can be raised to 8mm, 9mm, 10mm, 11mm or 13mm by adding up to three intermediate frames. The set contains two 2mm high and one 3mm high intermediate frame. They can easily be fixed with some glue suitable for plastic materials. The higher the speaker baffle, the better the bass fidelity. It certainly pays off to utilize the entire space available. Art.No. Delivery 50340 Speaker set, Dual 11x15mm, Modular Soundbox kit for 28mm, 20x40mm, 16x35mm
On order, shipped within 4-5 days
Speaker set, Single 11x15mm, Modular Soundbox kit for 20mm, 23mm, 16x25mm With our new modular speaker baffle set suitable for a single miniature speaker you can easily assemble your tailormade speaker baffle for two miniature speakers. Both – diameter and height – can be individually adapted to suit your needs. Even with one speaker the audio pressure is considerably better than with one circular speaker intended for these dimensions. The popular sugar cube speaker 11x15mm and 8 Ohm impedance is supplied with a sealed mounting plate. First select one of the three base frames subject to the type of speaker you want to assemble, namely a circular frame with either 20mm or 23mm diameter or a rectangular type with 16x25mm. After you have inserted the speaker into the base frame you may now determine the height of the speaker baffle. The minimum height is 6mm, which can be raised to 8mm, 9mm, 10mm, 11mm or 13mm by adding up to three intermediate frames. The set contains two 2mm high and one 3mm high intermediate frame. They can easily be fixed with some glue suitable for plastic materials. The higher the speaker baffle, the better the bass fidelity. It certainly pays off to utilize the entire space available. Art.No. Delivery 50341 Speaker set, Single 11x15mm, Modular Soundbox kit for 20mm, 23mm, 16x25mm
On order, shipped within 4-5 days
Speaker 29mm x 65mm x 14mm, square, 4 Ohm, Passive Radiator This speaker module is suitable for models with gauge 0 or gauge 1. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass. The speaker fits perfectly with our LokSound 5 L or LokSound 5 XL decoders. Art.No. Delivery 50343 Speaker 29mm x 65mm x 14mm, square, 4 Ohm, Passive Radiator
On order, lead time to be confirmed
Speaker 24mm x 55mm x 8.6mm, square, 4 Ohm, Passive Radiator This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass but don't need extreme volume. The speaker fits perfectly with our LokSound 5 or LokSound 5 L decoders. Art.No. Delivery 50344 Speaker 24mm x 55mm x 8.6mm, square, 4 Ohm, Passive Radiator 50346 Speaker 24mm x 55mm x 8.6mm, square, 8 Ohm, Passive Radiator
On order, shipped within 4-5 days
Speaker 22mm x 42mm x 8.0mm, square, 4 Ohm, Passive Radiator This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves significantly improved bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decoders. Art.No. Delivery 50345 Speaker 22mm x 42mm x 8.0mm, square, 4 Ohm, Passive Radiator 50347 Speaker 22mm x 42mm x 8.0mm, square, 8 Ohm, Passive Radiator
On order, shipped within 4-5 days
Speaker 24mm x 55mm x 8.6mm, square, 8 Ohm, Passive Radiator This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass but don't need extreme volume. The speaker fits perfectly with our LokSound 5 or LokSound 5 L decoders. Art.No. Delivery 50344 Speaker 24mm x 55mm x 8.6mm, square, 4 Ohm, Passive Radiator 50346 Speaker 24mm x 55mm x 8.6mm, square, 8 Ohm, Passive Radiator
On order, shipped within 4-5 days
Speaker 22mm x 42mm x 8.0mm, square, 8 Ohm, Passive Radiator This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves significantly improved bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decoders. Art.No. Delivery 50345 Speaker 22mm x 42mm x 8.0mm, square, 4 Ohm, Passive Radiator 50347 Speaker 22mm x 42mm x 8.0mm, square, 8 Ohm, Passive Radiator
On order, shipped within 4-5 days
Speaker 18mm x 35mm x 11mm, rechteckig, 4 Ohm, Passive Radiator This speaker module offers extremely good performance data with moderate dimensions. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves high quality bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decoders. Art.No. Delivery 50348 Speaker 18mm x 35mm x 11mm, rechteckig, 4 Ohm, Passive Radiator
On order, shipped within 4-5 days
Speaker D=28mm x 11mm, round, 4 Ohm, Passive Radiator This round speaker module can replace a regular 28mm round speaker in most cases. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves high quality bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decoders. Art.No. Delivery 50349 Speaker D=28mm x 11mm, round, 4 Ohm, Passive Radiator
On order, shipped within 4-5 days
This speaker module offers extremely good performance data with moderate dimensions. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves high quality bass reproduction and achieves a considerable sound pressure even in the highs and mids. It was specially developed for American Scaletrains (SXT) diesel locomotives as a replacement for the factory-fitted speakers: It fits without adapting the locomotive. The speaker fits perfectly with our LokSound 5 decoders.
On order, lead time to be confirmed
For difficult installation situations with little available space, especially in N-gauge, we recommend our miniature loudspeaker with a footprint of just 10mm x 12mm. This speaker was selected by our audio engineers after extensive testing because it offers a good compromise between acceptable bass reproduction and volume. This ‘dwarf’ produces an astonishingly high sound pressure level - when combined with the appropriate sound chamber. The set includes four sound chambers of different heights, resulting in a total height (with mounted speaker) of 11mm, 8mm, 6mm or 5mm. Choose the largest sound capsule that you can accommodate. Adhesive tape is provided on the speaker itself for simple, airtight mounting. The solder connection is made via a short piece of flexible printed circuit board.
On order, shipped within 4-5 days
At 13mm x 18mm, this new ‘sugar cube’ loudspeaker is larger than the speaker previously known from ESU. As the diaphragm is therefore a good 40% larger, it can produce significantly higher sound pressure levels. Bass, midrange, and treble reproduction are flawless. This speaker can be used anywhere our bass reflex speakers don't have space, but where the best possible bass reproduction is still important. The same applies to our new speaker: the larger the sound chamber, the better the sound. We supply 4 sound chambers of different heights in the set. With the speaker mounted (hermetically sealed!), the total height is 17.5mm, 12.5mm, 9.5mm or 7.5mm.
On order, lead time to be confirmed
Loudspeaker 40mm, round, 100 Ohm, with sound chamber For the well-proven LokSound V3.5, LokSound micro V3.5 and LokSound V3.0 M4 decoders we offer loudspeakers in the following sizes: 2x13mm (50 Ohms each), 2x16mm (50 Ohms each), 16x25mmm, 20mm, 23mm, 28mm, 20x40mm and 40mm. By virtue of the internal design of the decoders, the speakers feature a specially customised impedance of 100 Ohms. Only these speakers may be used! Art.No. 50335 Loudspeaker 32mm, rund, 100 Ohm, without sound chamber Expires 50442 Loudspeaker 23mm, round, 100 Ohm, with sound chamber Expires 50444 Loudspeaker 40mm, round, 100 Ohm, with sound chamber Expires 50447 Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber Expires 50448 Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber Expires
On order, lead time to be confirmed
Loudspeaker 78mm, round, 8-32 Ohms, with sound chamber decoders work with loud speakers which have an impendance from 8-32 Ohms. ESU offers you a selection of the sizes 40mm, 57mm and 78mm includung sound chamber as well as some high-class Visation XL loudspeakers without sound chamber. Visaton loudspeakers offer a powerful bass and a high-quality audio playback, whereas ESU loudspeakers are also suitable for open-land vehicles due to their plastic membrane. 50336 50336 50337 50337 50446 Part No. 50322 Loudspeaker Monacor Sp6/4SQ, 59mm, round, 8 Ohms, for PIKO G/LGB Loks 50323 Loudspeaker 40mm round, 8 Ohms, with sound chamber for LokSound H0, LokSound XL 50324 Loudspeaker Visaton FRS 7, 70mm, round, 8 Ohms 50336 Loudspeaker Visaton SC4.7ND, 41x70mm, square, 8 Ohms 50337 Loudspeaker Visaton FRS5, 50mm, round 8 Ohms 50446 Loudspeaker 78mm, round, 8-32 Ohms, with sound chamber Expires
On order, shipped within 4-5 days
Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber For the well-proven LokSound V3.5, LokSound micro V3.5 and LokSound V3.0 M4 decoders we offer loudspeakers in the following sizes: 2x13mm (50 Ohms each), 2x16mm (50 Ohms each), 16x25mmm, 20mm, 23mm, 28mm, 20x40mm and 40mm. By virtue of the internal design of the decoders, the speakers feature a specially customised impedance of 100 Ohms. Only these speakers may be used! Art.No. 50335 Loudspeaker 32mm, rund, 100 Ohm, without sound chamber Expires 50442 Loudspeaker 23mm, round, 100 Ohm, with sound chamber Expires 50444 Loudspeaker 40mm, round, 100 Ohm, with sound chamber Expires 50447 Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber Expires 50448 Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber Expires
On order, lead time to be confirmed
LED lighting strip with taillight, 255mm, 11 LEDs, „warm-white“. For gauge N,TT, H0 The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight. You may add a LokPilot Fx V4.0 function decoder at any time. Part No. 50700 LED lighting strip with taillight, 255mm, 11 LEDs, „warm-white“. For gauge N,TT, H0 50702 LED lighting strip with taillight, 255mm, 11 LEDs, „yellow“. For gauge N,TT, H0
On order, shipped within 4-5 days
LED lighting, current collector (Wheel contact) for waggons N / H0, 8-piece set, gauge: N, TT, H0 Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel flange). Since each set consists of two sprung contact strips one set per axle is enough. Suitable for any axle spacing. Suitable for H0 DC and AC or N gauge. Set with 8 current pick-up contacts sufficient for 8 axles. The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably prevents any flicker in case of poor contact. Despite the fact that it is more compact than its predecessor it has twice the capacity (0.22F/5.5V). Please note that the PowerPack 50710 is designed for use with the interiour light strips only. It can not be used to buffer decoders! Part No. Delivery 50710 LED lighting strip, PowerPack energy storage, 0,22F, double pack 50707 LED lighting, current collector (Wheel contact) for waggons N / H0, 8-piece set, gauge: N, TT, H0
On order, shipped within 4-5 days
LED lighting strip, PowerPack energy storage, 0,22F, double pack Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel flange). Since each set consists of two sprung contact strips one set per axle is enough. Suitable for any axle spacing. Suitable for H0 DC and AC or N gauge. Set with 8 current pick-up contacts sufficient for 8 axles. The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably prevents any flicker in case of poor contact. Despite the fact that it is more compact than its predecessor it has twice the capacity (0.22F/5.5V). Please note that the PowerPack 50710 is designed for use with the interiour light strips only. It can not be used to buffer decoders! Part No. Delivery 50710 LED lighting strip, PowerPack energy storage, 0,22F, double pack 50707 LED lighting, current collector (Wheel contact) for waggons N / H0, 8-piece set, gauge: N, TT, H0
On order, shipped within 4-5 days