Electronic Accessories
Easy connection (only 4 cables). Current situation is shown by 4 LEDs. No regulated transformer required. Connection to 10 – 16 V AC voltage or 14 – 22 V DC. The output is DC, so it is not suitable for AC (Märklin) or digital locomotives.
On order, lead time to be confirmed
Compatible with the s88. The feedback decoder can be used with the Märklin Interface, the Märklin Memory, Uhlenbrock Intellibox and Viessmann Commander. The 16 inputs of the module for track occupancy detection or for starting memory-switch sequences can be connected to the track contacts item 6840 or with Märklin K-and C-tracks directly to the contacts track section. Attached is a 15 cm length special cable and original s88 plugs. For 2 rail tracks the track occupancy detector item 5233 is recommended.
On order, lead time to be confirmed
Useable in connection with control modules for colour light signals items 5221 – 5223 and hobby light signals, item 4021, 4022. The module offers 3 possible distant signal aspects (Vr0, Vr1 and Vr2). Authentic smooth switch of signal aspects. By masking the stop showing home signal fixed on the same mast the distant signal is switched off.
On order, lead time to be confirmed
Useable for all 2-aspect colour light main signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal aspects Hp0 and Hp1. Authentic smooth switch of signal aspects. Integrated contact for train control. With stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5547, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.
On order, lead time to be confirmed
Useable for all 3-aspect colour light entry signals scale 0 to Z (except signals with multiplex-technology). The module provides all 3 entry signal aspects (Hp0, Hp1 and Hp2). Authentic smooth switch of signal aspects. Integrated contact for train control. With stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5546, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.
On order, lead time to be confirmed
Useable for all 4-aspect colour light departure signals scale 0 to Z (except signals with multiplex-technology). The module provides all 4 block signal aspects (Hp0, Hp1, Hp2 and Sh1). Authentic smooth switch of signal aspects. Integrated contact for train control. By stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5545, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.
On order, lead time to be confirmed
The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore, it is suitable for all signal scales 0 up to Z (except for the Viessmann signals with multiplex-technology). It can be activated in conventional mode via the push-button panels items 5545, 5546 and 5547 or via a digital signal. It is equipped with Viessmann Signalbus and can be configured for the following applications: 2 or several aspect colour light signal: A 2-aspect home signal with the aspects proceed and stop requires the push-button panel item 5547 (for 4 signals) or a digital address. A signal with 3 or 4 aspects with the additional aspects proceed slowly and shunting permitted requires the push-button panel item 5546 (3-aspect, 2 signals) resp. item 5545 (4-aspect, 2 signals) resp. a digital operation 2-aspect. Distant signal or block signal: When configured as a block signal the module responds automatically to the status of the corresponding track sector. This works only in conjunction with track occupancy detectors with continuous output. Per signal sector up to 2 track sectors are required. In this mode the module changes automatically to proceed if the following sector is clear (unoccupied). If one of the two sectors is occupied, the module switches to stop. Own distant signal or distant signal on the same mast: The signal module controls the main signal and the corresponding distant signal or the distant signal of a following main signal mounted on the same mast. In that case the distant signal will show the dark aspect when the main signal shows stop. Interrupt track supply or switch on brake generator when stop aspect is shown: With the relay for automatic train control item 5228 the module can stop trains automatically either by interrupting the track voltage in front of the signal or – more prototypical – with the digital brake module item 5232 (Märklin Motorola) or a brake generator (for NMRA DCC). This makes it possible in both analogue and digital mode to control the track by sections. Signal with aspects stop and proceed slowly: If required you can configure the module to permit these two aspects only. In that case the module can be activated via the push-button panel item 5547 or a digital address. Regardless if the module is triggered by push buttons or track contacts the logic always assures that the red button has preference if two or more devices provide conflicting commands.
On order, lead time to be confirmed
The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231, 5280 and 5285 and digital signals. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able supply to 200 LED lights or several decoders. Power rating: 5A. Protected against overload, a green LED indicates the readiness for operation.
On order, lead time to be confirmed
2 separate monostable relays with each 2 double-pole double-throw. The relays have no limit switch, nevertheless they can be driven with steady continous current. The control takes place by positive switchinging signals resp. steady continuous current, AC voltage or digital current. Due to internal electronics the relay is noiseless even by connection to digital circuits or pulsed signals. It is intended for train control for the semaphore home signal item 4702 with its 3 terms and for the frog polarization with the switching and turnout decoder item 5280. Power input approx. 2 x 14 mA by 16 V. Contact load max. 2 A each changeover contact.
On order, lead time to be confirmed
Directly pluggable train control relay extends control modules items 5224 and 5229 by the automatic train control but can also be used separately. Control modules can stop the trains automatically. This is possible by switching off (separately track and catenary) or in digital operation more authentically by switching to braking module item 5232 (for Märklin Motorola) or braking generator (for NMRA-DCC). Therefore it is equipped with bipolar switch. Relays have to be switched to minus. Contact load per changeover contact: 2 A.
On order, lead time to be confirmed
The module is equipped with an integrated digital decoder. Decoder recognizes Märklin-Motorola format and NMRA-DCC. The module is suitable for one home- and one distant signal with Viessmann multiplex-technology, e. g. Ks-signals items 4040 – 4046 and standard light signals with multiplex-technology items 4720 – 4730. Equipped with Viessmann signalbus and Viessmann SpeedBus and can be controlled by push-button panels, items 5545 – 5547 by track contacts or by digital switching commands. Viessmann SpeedBus provides comfortable connection to the Viessmann Commander with automatic registration. Equipment and configurability of this module are identical with that of the control module for light signals without multiplex-technology item 5224. The module is able to control block distance sections and can automatically stop the train with train control module item 5228. This can be done off interrupting the track coltage in front of the signal or, even more prototypical, in case of digital systems by switching to the braking module item 5232 (for Märklin-Motorola) or braking generator/ABC-braking (for NMRA-DCC). The signal connection is done by a single plug-in. Authentic smooth transition of signal aspects. It is equipped with button for address setting, DIP-switch for configuration and LED status display.
On order, lead time to be confirmed
Digital turnout decoder for one turnout, suitable for Märklin and Trix C-track turnouts. A separate switching voltage input is possible! This provides a safe switching of the tracks even if several trains are operated at the same time. The decoder recognizes DCC and Märklin-Motorola format. It is also possible to operate decoders via loc addresses, thus offering operation with drive control units which cannot address switching decoders (e. g. early Mobile Station and Roco Lokmäuse).
On order, lead time to be confirmed
Compatible with Viessmann Commander, Märklin digital systems (Märklin-Interface and Memory), Uhlenbrock Intellibox and Fleischmann Twin-Center. The 8 inputs of the decoder can be connected directly to the rail segments and are suitable for displaying the occupancy of the segments or to trigger Märklin Memory- or Intellibox. IB-switch functions and routes in the commander are directly connectable to the controlled track sections. The integrated electronic sensors can detect any vehicle which consumes current (locomotives, coaches equipped with lights or with resistors) on the isolated rail segments. FFor this purpose the middle rail of a 3-rail system, or one of the rails of a 2-rail system has to be isolated. Optocouplers in the module increase the reliability of operation. Track voltage is supervised, so the occupancy information is preserved even after a blackout. A 15 cm long flat cable with s88 plug is attached.
On order, lead time to be confirmed
4-pole extension cable to connect multiplex colour light signals and the control module multiplexers items 5229 and 52292. Length: 1 m.
On order, lead time to be confirmed
Miniature multi-protocol locomotive decoder suitable for RailCom, DC, DCC (2- and 4-digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 1 A continuously, 1.8 A peak. 4 function outputs, with additional features: Function mapping, direction-dependent headlights, dimming, flashing. The max. current of the function outputs is 500 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: L ca. 2,5 x W 1,54 x H 0,33 cm.
On order, lead time to be confirmed
Miniature multi-protocol locomotive decoder suitable for RailCom, DC, DCC (2- and 4-digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 1 A continuously, 1.8 A peak. 4 function outputs, with additional features: Function mapping, direction-dependent headlights, dimming, flashing. The max. current of the function outputs is 500 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: L ca. 2,4 x W 1,42 x H 0,2 cm.
On order, lead time to be confirmed
Compact blinker unit that can be integrated especially well into model buildings due to their small dimensions and provide a realistic fire flicker. Operation with only one LED is possible. Easy wiring due to wires already soldered to the LEDs. Dimensions Electronics: L 2,5 x W 0,4 x H 0,3 cm, LED: L 0,16 x W 0,08 cm.
On order, lead time to be confirmed
The decoder is a multi protocol decoder for DCC and Märklin Motorola. Suitable as a point decoder for 4 turnouts with double coils and controls 2 additional servos. Equipped with 4 output pairs, which can also be configurated with additional special functions. So lighting effects, blinking for road works or advertising are possible. The decoder recognizes settings of the turnouts with end position and informs postion by RailCom. Features: 4 pairs of turnout outputs (double coils). Switches positive voltage, outputs can also be configured as single outputs, power supply can be provided from the digital signal or from an external supply to reduce load. Many functions for the outputs: Impulse, constant or flashing outputs, adjustable output power, max. current 5 A each output, max. 5 A total. Max. current adjustable. LEDs indicate the states of the outputs. Programmable via the programming track and POM. Address can be also set with the push of a button. Supports RailCom. The speeds and end positions of the servos can be configured, power supply for both servos, total 300 mA constant, 450 mA peak. Screw terminals.
On order, lead time to be confirmed
Multi protocol decoder for DCC and Märklin-Motorola. Equipped with 4 powerful relays, and can control 2 servos.Features: 4 separate and galvanically isolated outputs, bi-stable outputs, switching position is preserved even without supply voltage. Supply provided by the track signal, continuous current up to 5 A each output, LEDs indicate the states of the outputs. Programmable via the programming track and POM. Address can be also set with the push of a button. Supports RailCom. The speeds and end positions of the servos can be configured, power supply for both servos: 300 mA total continuously, 450 mA peak. Screw terminals.
On order, lead time to be confirmed
Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Dimensions: ca. L 1,15 x W 0,95 x H 0,21 cm.
On order, lead time to be confirmed
Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Decoder identical to item 5296, but with 6-pole plug according to NEM 651 S. Dimensions: ca. L 1,56 x W 0,95 x H 0,21 cm (incl. plug).
On order, lead time to be confirmed
Miniature multi protocol locomotive decoder suitable for RailCom, DC, DCC (2 and 4 -digit addresses) and Märklin Motorola, with automatic protocol recognition. Adjustable minimum and maximum speeds as well as a freely programmable speed step table (28 steps), adjustable high frequency load regulation, also suitable for coreless motors, with 14, 28 and 128 speed steps and shunting mode. Drive current 0.5 A continuously, 0.8 A peak. 2 function outputs for lights depending on direction, with additional features: Function mapping, dimming, flashing. The max. current of the function outputs is 300 mA. All outputs are protected against overloading, in addition the decoder is protected against overheating. The decoder has a SUSI interface, as well as a connection for external energy storage, as soldering pads. Decoder identical to item 5296, but with Next18 plug. Dimensions: ca. L 1,55 x W 0,95 x H 0,21 cm (incl. plug).
On order, lead time to be confirmed
The coupler connects your digital command station with the Viessmann Commander. It detects the track signals from the station and sends information to the commander. Suitable for Motorola and DCC stations. So all track-, switch- and operation commands are transmitted to the station. LSB-cable is included.
On order, lead time to be confirmed
Cable with plugs for LowSpeedBus. Also suitable for LocoNet.
On order, lead time to be confirmed