Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Wiring & Connectors

Filter products
Sockets, ∅ 1.6 mm, gray
Brawa 3747
Sockets, ∅ 1.6 mm, gray

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Sockets, ∅ 1.6 mm, white
Brawa 3749
Sockets, ∅ 1.6 mm, white

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Pin Connectors, ∅ 1.6 mm, orange
Brawa 3756
Pin Connectors, ∅ 1.6 mm, orange

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Pin Connectors, ∅ 1.6 mm, white
Brawa 3759
Pin Connectors, ∅ 1.6 mm, white

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Cable Holders
Brawa 3910
Cable Holders

To secure up to 25 wires or cable strands safely Pack of 10

Regular price: CHF 7.40

On order, shipped within 10-15 days

Light-emitting Diode
Brawa 3913
Light-emitting Diode

DC Connect only through 1000 Ohm line resistor Yellow Ø 2 mm

Regular price: CHF 2.70

On order, shipped within 10-15 days

10% off the recommended price
Flat cable, 3-colour green, red, yellow
Busch 1782
Flat cable, 3-colour green, red, yellow

A 5 m reel of flat cable with a cross-section of 0.14 mm².

Selling price: CHF 5.30 RRP CHF 5.90

On order, lead time to be confirmed

10% off the recommended price
Red switch wire
Busch 1790
Red switch wire

A 10 m reel. Switching wire with a diameter of 0.14 mm².

Selling price: CHF 3.40 RRP CHF 3.80

On order, lead time to be confirmed

10% off the recommended price
Yellow control cable
Busch 1791
Yellow control cable

A 10 m reel. Switching wire with a diameter of 0.14 mm².

Selling price: CHF 3.40 RRP CHF 3.80

On order, lead time to be confirmed

10% off the recommended price
Green link wire
Busch 1792
Green link wire

A reel of 10 m. Switching wire with a diameter of 0.14 mm².

Selling price: CHF 3.40 RRP CHF 3.80

On order, lead time to be confirmed

10% off the recommended price
Brown link wire
Busch 1794
Brown link wire

A 10 m reel. Switching wire with a diameter of 0.14 mm².

Selling price: CHF 3.40 RRP CHF 3.80

On order, lead time to be confirmed

10% off the recommended price
Black stranded wire
Busch 1795
Black stranded wire

A 10 m reel. Switching wire with a diameter of 0.14 mm².

Selling price: CHF 3.40 RRP CHF 3.80

On order, lead time to be confirmed

Wheel test rig
Busch 1800 Scale H0
Wheel test rig

Rolling test stands are used to lift locomotives. The traction current is transferred from the rail to the locomotive wheels via the rolling test stands. The locomotive wheels can rotate freely. Rolling test stands are used in the workshop (for locomotive repairs, oiling the motor, etc.) or for presenting locomotives, for example on a bookshelf.

Selling price: CHF 69.90 RRP CHF 77.60

On order, lead time to be confirmed

Digital coupling cable, 2-pole, RM1.0mm, 25mm
ESU 41002 Scale H0
Digital coupling cable, 2-pole, RM1.0mm, 25mm

automatic, coil-based digital coupler, adjustable height, with two single wires AWG black, length 55mm, 2 pieces The electromagnetic digital coupling, which has been known from the ESU Engineering Edition locomotives since the end of 2021 and has been optimized many times, is now also available separately for retrofitting vehicles with an NEM shaft. Thanks to the integrated height adjustment, the coupler can be easily adapted to the locomotive intended for retrofitting. Two highly flexible cables are already soldered to the coupler. The coupling couples and uncouples all bow couplings commonly available on the market (also made of magnetic material), the ESU and Roco® universal couplings and the Märklin® short coupling. An ESU LokSound 5 or LokPilot 5 is strongly recommended for control, as these have the appropriate control mode. Art.No. Delivery 41002 automatic, coil-based digital coupler, adjustable height, with two single wires AWG black, length 55mm, 2 pieces

Selling price: CHF 32.90 RRP CHF 34.90

On order, shipped within 4-5 days

Cable 10 m black
ESU 51942
Cable 10 m black

Super thin cable, 0.5mm diameter, AWG36, 10m bundle, black colour Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price. If the loco in question features no digital interface and you don’t want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the decoder. That’s how the Pro’s do it!

Regular price: CHF 5.80

On order, shipped within 4-5 days

Next18 f.6 outputs with soldered connections and soldered cables
ESU 51999
Next18 f.6 outputs with soldered connections and soldered cables

Adapter board Next18 for 6 amplified outputs. With soldering pads and wires The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions of only 13.0 mm x 9.0 mm, the board is extremely small and also has a break-off fastening tab. For the functions AUX3 and AUX4, which are designed as logic outputs on the decoder according to the standard, power amplifiers (approx. 180mA each) are on board. A total of up to 6 outputs can be used. Already soldered connection cables with a length of approx. 20 cm for the most important contacts ensure easy handling and wiring. Dimensions: Length 13.0 mm x 9.0 mm (With mounting tongue: 18.0 mm x 9.0 mm). Art.No. Delivery 51999 Adapter board Next18 for 6 amplified outputs. With soldering pads and wires

Regular price: CHF 13.90

On order, shipped within 4-5 days

Pink cable, 0.5 mm, AWG 36, 2 A, 10 m reel
ESU 53910
Pink cable, 0.5 mm, AWG 36, 2 A, 10 m reel

Highly flexible wire, diameter 0.5mm, AWG36, 2A, 10m sleeve, pink colour Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price. If the loco in question features no digital interface and you don’t want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the decoder. That’s how the Pro’s do it!

Regular price: CHF 5.80

On order, shipped within 4-5 days

Turquoise cable 0.5 mm AWG 36 2A 10 m reel
ESU 53911
Turquoise cable 0.5 mm AWG 36 2A 10 m reel

Highly flexible wire, diameter 0.5mm, AWG36, 2A, 10m sleeve, turquoise colour Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we offer you super thin cables (AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colors. They come in 10 m (30 feet) bundles at an affordable price. If the loco in question features no digital interface and you don’t want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the decoder. That’s how the Pro’s do it!

Regular price: CHF 5.80

On order, shipped within 4-5 days

Adapter board, 24-pin E24 socket to open leads, 88 mm
ESU 53953
Adapter board, 24-pin E24 socket to open leads, 88 mm

Adapter board, 24-pin E24 socket to open wires, 88mm, heat shrink The E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface using the LokSound 5 Nano. With dimensions of only 19.6 mm x 8.5 mm, the board is exactly the same size as the decoder itself and therefore only increases the thickness as a “sandwich”. Already soldered connection wires with a length of approx. 88 mm for power pickup, motor and speaker as well as U+, the non-resistor protected powered light outputs FL, RL, AUX1, AUX2, AUX5, and AUX6 ensure easy handling and wiring. Soldering pads AUX7 and AUX8 are powered for additional lights. Soldering pad AUX3 is "PowerPack Control" when used with an ESU 58923 LokSound 5 Nano DCC decoder. Art.No. Delivery 53953 Adapter board, 24-pin E24 socket to open wires, 88mm, heat shrink

Selling price: CHF 8.70 RRP CHF 8.90

On order, shipped within 4-5 days

Rechargeable battery 400 mAh
Faller 163251 Scale H0
Rechargeable battery 400 mAh

1 x for item no. 161573, 162005, 162006 and 162931. 2 x for item no. 161303, 161304, 161305, 161516, 161536, 161549, 161552, 161560, 161561, 161577 and 161578.

Selling price: CHF 20.90 RRP CHF 21.90

On order, shipped within 4-5 days

Motor bracket for Ø 10 mm motor, axle 24 mm / module 0.3 Z30
Faller 163501 Scale H0
Motor bracket for Ø 10 mm motor, axle 24 mm / module 0.3 Z30

Modification part

Regular price: CHF 11.90

On order, shipped within 4-5 days

Motor bracket for Ø 7 mm motor, axle 24 mm / module 0.3 Z18
Faller 163502 Scale H0
Motor bracket for Ø 7 mm motor, axle 24 mm / module 0.3 Z18

Modification part

Regular price: CHF 11.90

On order, shipped within 4-5 days

Worm gear, module 0.3 Z30
Faller 163551 Scale H0
Worm gear, module 0.3 Z30

Modification part

Regular price: CHF 10.90

On order, lead time to be confirmed

Worm gear, module 0.3 Z18
Faller 163552 Scale H0
Worm gear, module 0.3 Z18

Modification part

Regular price: CHF 10.90

On order, lead time to be confirmed