Layout Modules
The Perfect Addition! The NOCH item 61650 includes 35 round wooden support poles, each 40 cm long, designed for use with the TERRA-FORM system. These poles act as structural framework for terrain modelling on model railway layouts. You don’t need any manual experience for this, and only a few tools: a pair of scissors, a craft knife, a backsaw, a hammer and a hot glue gun. In contrast to the conventional approach, you start by laying out the tracks. You first set up the rail system and lay all electrical connections on an underlay of your choice (e.g. blockboard, chipboard or solid wood board). After a test drive, you start designing the landscape – over and around the track layout. The first thing you do is set up the tent-like framework. Since the round poles are only inserted into the connecting elements, the structure can be corrected and changed at any time. With this framework system, a subsequent redesign is just as easy as the ongoing ‘maintenance’ of the rails and the entire technology. When the framework is in place, it is then covered with NOCH Landscape Crepe Paper and now forms your ‘blank terrain’, which you can further develop according to your wishes. 40 cm long, 35 pieces
In stock: 5 on the shelf, shipped within 1-3 days
You Can Do Some Modelling with This! Modelling Compound The white, smooth "Modelling Compound" is ideal for terrain construction. It is mainly used to create flat surfaces, for example as a base for houses or roads on a model landscape. NOCH Modelling Compound does not become brittle even once it has dried, so the risk of cracks forming is very low. White, smooth, 500 g
In stock: 3 on the shelf, shipped within 1-3 days
How Your Landscape Gets Its Own Profile TERRA-FORM is the tried and tested and extremely ingenious method of model landscaping: quick and uncomplicated, remarkably lightweight, highly flexible and inexpensive. This set, comprising 72 Connector Pieces, is the optimal addition to the TERRA-FORM Basic Set. You don’t need any manual experience for this, and only a few tools: a pair of scissors, a craft knife, a backsaw, a hammer and a hot glue gun. You first set up the rail system and lay all electrical connections on an underlay of your choice (e.g. blockboard, chipboard or solid wood board). After a test drive, you start designing the landscape – over and around the track layout. The first thing you do is set up the tent-like framework. Since the round poles are only inserted into the connecting elements, the structure can be corrected and changed at any time. With this framework system, a subsequent redesign is just as easy as the ongoing ‘maintenance’ of the rails and the entire technology. When the framework is in place, it is then covered with NOCH Landscape Crepe Paper and now forms your ‘blank terrain’, which you can further develop according to your wishes. Contents: 72 parts in total: 18 x connectors, 5-fach 14 x connectors, 3-way 8 x connectors, 2-way 8 x round, flat connectors, 2-way 24 x connectors, 1-way with adhesive pad
In stock: 3 on the shelf, shipped within 1-3 days
Transparent can with write-on label for storing all kinds of strew materials for layout construction. Two hinged openings are integrated in the screw cap and make for comfortable and exact dosing.
In stock: 1 on the shelf, shipped within 1-3 days
Stable, Flexible, Malleable! Landscaping Aluminium Wire Mesh XL The NOCH “Terrain aluminum mesh XL” is a fine-meshed, malleable aluminum mesh that has been specially developed for model making. The practical fabric is mainly used for designing terrain constructions. The “Terrain aluminum fabric XL” is particularly suitable for smaller, self-supporting mountain constructions or as a cover for a frame substructure. The popular NOCH Landscaping Aluminium Wire Mesh is also available in a smaller size! 100 x 75 cm, folded in a bag
In stock: 1 on the shelf, shipped within 1-3 days
This Is How Your Landscape Substructure Is Created! TERRA-FORM is the tried and tested and extremely ingenious method of model landscaping: quick and uncomplicated, remarkably lightweight, highly flexible and inexpensive. Two- to five-way connecting elements made of elastic plastic, into which round poles are inserted in the desired shape, form the basis of the system. The round poles are cut to the desired length and put together. You don’t need any manual experience for this, and only a few tools: a pair of scissors, a craft knife, a backsaw, a hammer and a hot glue gun. In contrast to the conventional approach, you start by laying out the tracks. You first set up the rail system and lay all electrical connections on an underlay of your choice (e.g. blockboard, chipboard or solid wood board). After a test drive, you start designing the landscape – over and around the track layout. The first thing you do is set up the tent-like framework. Since the round poles are only inserted into the connecting elements, the structure can be corrected and changed at any time. With this framework system, a subsequent redesign is just as easy as the ongoing maintenance of the rails and the entire technology. When the framework is in place, it is then covered with NOCH Landscape Crepe Paper and now forms your ‘blank terrain’, which you can further develop according to your wishes. This Basic Set contains everything you need for building a landscape substructure. Landscape Framework, 228 parts in total: · 50 wooden poles (40 cm each) · 1 flexible support pole (100 cm) · 36 connectors, 5-way · 28 connectors, 3-way · 16 connectors, 2-way · 16 round, flat connectors, 2-way · 48 connectors, 1-way with adhesive pad · 4 clamps · 12 prop upper plates · 12 prop lower plates · 4 base plates You also get to know: · 60cm x 60 cm NOCH Landscape Crepe Paper
In stock: 1 on the shelf, shipped within 1-3 days
The Perfect Underlay for Your Terrain! Reinforced Cardboard is the perfect underlay for railway routes and is ideal as a base for houses. Very stable underlay for railway routes or as a base for houses, 55 x 40 cm, 5 pieces
In stock: 1 on the shelf, shipped within 1-3 days
2 red cars with passenger 2×6281 2 yellow cars with passenger 2×6279 2 blue cars with passenger 2×6282 1 center mast, 190 mm high 6283 1 drive unit, upper station, complete with subframe 6285 1 complete cable guide section, lower station 6289 1 cable, 10 m long 6292 AC connection 8 - 16 V Presentation pack, without building kit. Suitable for NOCH layout 9927. Length can be increased.
On order, shipped within 10-15 days
Mountain station W 120 mm/L 185 mm Valley Station W 110 mm/L 150 mm Does not include balcony railing.
On order, shipped within 10-15 days
Prototype Engelberg is a quiet spa in Switzerland, not far away from Lucerne. It serves with an attraction that made worldwide sensation: A cableway that the Swiss thought worth taking up in the “Swiss Miniature” park as one of the most significant sights of the country. The 45-minute ride on Titlis is an experience of special kind. From the smooth green ground of valley it foes up into a high alpine glacier world. He who wants to reach the summit station in 3020 m of altitude, enters the first and new spectacular views of glacier gaps, ice breaks, and rock formations. Impressing mountain panoramas and, with appropriate weather, unique long-range visions consecutively change and shorten the 45-minute ride. For model railroaders a phantastic chance to activate their creativity at the design of pretentious mountain worlds. Model Building set for the mountain and valley station 2 illuminated gondolas 1 middle mast 280 mm 1 hauling and bearer cable Electronic operation (gondola speed can be regulated) Mountain station: width 180 mm, length 170 mm Valley station: width 190 mm, length 210 mm Middle Mast: width 75 mm / length 75 mm AC connection 16 V
On order, lead time to be confirmed
Prototype The Nebelhorn mountain is 2224 m high and is the local mountain of the spa town Oberstdorf in the Bavarian region of Allgäu. In 1927, the Nebelhornbahn AG was founded with the objective of developing the peak of the Nebelhorn for tourism. Construction work commenced one year later and in 1930, the Nebelhorn cableway was finished. When it was opened, it was the longest passenger aerial cableway in the world. The lower cableway, upon which the BRAWA model is based, climbs 452 m over a distance of 2.2 km. The central section gradient is 20.9 %. At a maximum speed of 10 m/s, it can transport 630 persons per hour. Model 2 cars, lighted, with motor-driven Rotating base 1 middle mast 280 mm 1 hauling and bearer cable 6241 1 drive for the mountain station Rope guide on the valley side Gift package without building set AC connection 16 V
On order, shipped within 10-15 days
Mountain station: W 167 mm/L 173 mm Valley station: W 135 mm/L 176 mm The mountain and valley station buildings of the lower Nebelhorn cableway not only contain the technology which is required but also reflect the traditional building style for the region.
On order, shipped within 10-15 days
Prototype The 1,712 metre high Hahnenkamm towers above the well-known Austrian winter sports resort of Kitzbühel. Several cable railways lead to the skiing resort, the venue for the annual Hahnenkamm race. The valley station of the Hahnenkamm railway is right in the centre of Kitzbühel, from where the 1658 metre high mountain station can be reached within 15 minutes. The cable car was built in 1929 as a monocable car. It overcomes a height difference of 872 metres over a distance of 2,356 metres. The gondolas accommodate 6 persons and offer a beautiful panoramic view of the Alps. Some of the gondolas bear the name of victorious downhill skiers of the international Hahnenkamm race on the strip. The strip is regarded as one of the most difficult and most dangerous racing courses in the world and has been the venue of the Hahnenkamm race since 1931. The BRAWA model also bears the true-to-original lettering. The H0 gauge Hahnenkamm cable car is a highlight of every model railway. It opens up the mountain world and invites you to go hiking or skiing. Model 8 gondolas 1 lattice mast (height 213 mm) 1 concrete mast (height 193.5 mm) 2 running-in masts (height 106 mm) Drive unit with complete mountain and valley station Cable 10 m long no. 6292 Powerful, low gear ratio, low-noise motor with integrated gearbox Modern gondolas which are used worldwide Construction kit Simple assembly Printing of the gondolas: 6 Matthias Mayer, Austria 72 Armin Bittner, Germany 21 Roland Columbin, Switzerland 94 Daron Rahlves, USA 76 Dedier Defago, Switzerland 24 Peter Fill, Italy 48 Luc Alphand, France 17 Hannes Reichelt, Austria
On order, shipped within 10-15 days
Prototype The 1,712 metre high Hahnenkamm towers above the well-known Austrian winter sports resort of Kitzbühel. Several cable railways lead to the skiing resort, the venue for the annual Hahnenkamm race. The valley station of the Hahnenkamm railway is right in the centre of Kitzbühel, from where the 1658 metre high mountain station can be reached within 15 minutes. The cable car was built in 1929 as a monocable car. It overcomes a height difference of 872 metres over a distance of 2,356 metres. The gondolas accommodate 6 persons and offer a beautiful panoramic view of the Alps. Some of the gondolas bear the name of victorious downhill skiers of the international Hahnenkamm race on the strip. The strip is regarded as one of the most difficult and most dangerous racing courses in the world and has been the venue of the Hahnenkamm race since 1931. The BRAWA model also bears the true-to-original lettering. The H0 gauge Hahnenkamm cable car is a highlight of every model railway. It opens up the mountain world and invites you to go hiking or skiing. Model Building Set for the mountain and valley station (base157 x 200 mm) Construction kit Simple assembly
On order, shipped within 10-15 days
Prototype The 1,712 metre high Hahnenkamm towers above the well-known Austrian winter sports resort of Kitzbühel. Several cable railways lead to the skiing resort, the venue for the annual Hahnenkamm race. The valley station of the Hahnenkamm railway is right in the centre of Kitzbühel, from where the 1658 metre high mountain station can be reached within 15 minutes. The cable car was built in 1929 as a monocable car. It overcomes a height difference of 872 metres over a distance of 2,356 metres. The gondolas accommodate 6 persons and offer a beautiful panoramic view of the Alps. Some of the gondolas bear the name of victorious downhill skiers of the international Hahnenkamm race on the strip. The strip is regarded as one of the most difficult and most dangerous racing courses in the world and has been the venue of the Hahnenkamm race since 1931. The BRAWA model also bears the true-to-original lettering. The H0 gauge Hahnenkamm cable car is a highlight of every model railway. It opens up the mountain world and invites you to go hiking or skiing. Model 2 gondolas Simple assembly Printing of the gondolas: 04 Kjetil Jansrud, Norway 71 Franz Klammer, Austria
On order, shipped within 10-15 days
Prototype Funicular systems from LEITNER ropeways are used throughout the world and fulfil various tasks with sustained success. In the year 1888 the sterzinger mechanic Gabriel Leitner opened a workshop for agricultural machinery and material express courses in its hometown in South Tyrol. In 1908 the first aerial ropeway proximity to Bolzano was finally built. Conditions were different at that time and the ability to get to the top of a mountain so quickly and easily was considered a sensation. As one of the leading global manufacturers of cableway systems, LEITNER ropeways currently produces primarily technically advanced detachable gondola lifts and chairlifts, aerial tramways, funicular ropeways, inclined elevators and fix-gripped ski lifts. LEITNER has supplied over 2,000 kilometres of funiculars in 50 countries. In winter it’s skiers and snowboarders who want to be transported; in summer very different passengers, from hikers to mountain bikers through to paraglider pilots, use the funiculars for transport. The funiculars continue to offer increased comfort and a stimulating travel experience. The new BRAWA chairlift is modelled after a detachable 6-seat lift. The desire to innovate and attention to quality have always ensured that the automatically detachable chairlifts from LEITNER ropeways are state of-the-art and simultaneously set new standards for comfort, design and efficiency. Since the beginning, the successful design of automatically detachable chairlifts has been based on the uncompromising pursuit of quality and the prioritisation of efficiency. All LEITNER chairs, the 4-, 6-, and 8-seater, offer exclusive comfort and can be ordered with optional seat heating and a lockable safety bracket. The LEITNER seat canopies have an attractive and functional design: in particular at windy elevations, at extreme sub-zero temperatures and on long routes, canopy chairs are the ideal mode of transport. The blue hoods provide thereby permanently a blue sky. In addition, a wide seat, a raised seat back and an optimally shaped footrest provide premium sitting comfort. Model 8 modern 6-seat gondolas 4 masts Building set for mountain and valley station Drive unit with complete mountain and valley station Cable 10 m long no. 9292 Powerful, low gear ratio, low-noise motor with integrated gearbox Simple assembly
On order, shipped within 10-15 days
Prototype Funicular systems from LEITNER ropeways are used throughout the world and fulfil various tasks with sustained success. In the year 1888 the sterzinger mechanic Gabriel Leitner opened a workshop for agricultural machinery and material express courses in its hometown in South Tyrol. In 1908 the first aerial ropeway proximity to Bolzano was finally built. Conditions were different at that time and the ability to get to the top of a mountain so quickly and easily was considered a sensation. As one of the leading global manufacturers of cableway systems, LEITNER ropeways currently produces primarily technically advanced detachable gondola lifts and chairlifts, aerial tramways, funicular ropeways, inclined elevators and fix-gripped ski lifts. LEITNER has supplied over 2,000 kilometres of funiculars in 50 countries. In winter it’s skiers and snowboarders who want to be transported; in summer very different passengers, from hikers to mountain bikers through to paraglider pilots, use the funiculars for transport. The funiculars continue to offer increased comfort and a stimulating travel experience. The new BRAWA chairlift is modelled after a detachable 6-seat lift. The desire to innovate and attention to quality have always ensured that the automatically detachable chairlifts from LEITNER ropeways are state of-the-art and simultaneously set new standards for comfort, design and efficiency. Since the beginning, the successful design of automatically detachable chairlifts has been based on the uncompromising pursuit of quality and the prioritisation of efficiency. All LEITNER chairs, the 4-, 6-, and 8-seater, offer exclusive comfort and can be ordered with optional seat heating and a lockable safety bracket. The LEITNER seat canopies have an attractive and functional design: in particular at windy elevations, at extreme sub-zero temperatures and on long routes, canopy chairs are the ideal mode of transport. The blue hoods provide thereby permanently a blue sky. In addition, a wide seat, a raised seat back and an optimally shaped footrest provide premium sitting comfort. Model 2 modern 6-seat gondolas
On order, shipped within 10-15 days
Presentation pack without building kit 1 center mast, 77 mm high 6212 1 drive unit, upper station 6214 1 cable guide, lower station 6217 2 cars, blue 2×6562 2 cars, red 2×6561 1 pull cable, 10 m long 6292 Can be extended DC connection 8 - 16 V Replacement motor with mounting from year of manufacture 9/92: Item no. 9713 Replica of the Schauinsland funicular near Freiburg, Germany.
On order, lead time to be confirmed
Building set for the mountain and valley station Mountain station W 150 mm/L 130 mm Valley station W 150 mm/L 130 mm Suitable for NOCH ready-made layouts 8163, 8199, 9910 DC connection 8 - 16 V Can be extended Replacement motor with mounting from year of manufacture 9/92: Item no. 9713 Replica of the Schauinsland funicular near Freiburg, Germany.
On order, shipped within 10-15 days
Sealable storage can for strew fibers. The cap matches our »Gras-Fix« (art. 180691). The two sealing caps make for easy and quick switching between fibers of different height or color while filling the grassing device.
On order, shipped within 4-5 days
assorted in 5 different colours. Ideal for modelling bushes, mountain flora, brooksides etc.
On order, shipped within 4-5 days
For the realistic design of meadows and wild green spaces. Particularly suitable for electrostatic grassing with our »Gras-Fix« (Art. 180691). For optimum results, we recommend the use of our EXPERT spray adhesive, 400 ml (Art. 170497). Fibre height: 6 mm
On order, shipped within 4-5 days
For the realistic design of meadows and wild green spaces. Particularly suitable for electrostatic grassing with our »Gras-Fix« (Art. 180691). For optimum results, we recommend the use of our EXPERT spray adhesive, 400 ml (Art. 170497). Fibre height: 6 mm
On order, shipped within 4-5 days
For realistic detailing of meadows and wild green areas. Particularly suitable for electrostatic grass application with our “Gras-Fix” (item 180691).
On order, shipped within 4-5 days