Layout Modules
Build Your Dream Layout H0 easy TRACK Railway Route Kit 'St Andreas' The easy TRACK Railway Route Kit 'St Andreas’ designed as an L-shaped layout and has an overall length of at least 219 cm with a width of the L-shaped leg of 160 cm. The centre section has a width of 116 cm. The exciting track plan includes some special features: A long parade line runs clearly visible along the edge of the layout so that long train sets can also be presented effectively. The station track is designed as a long parallel track so that this train set can be parked in the station area. This allows a second train to pass through the station unhindered. Two shunting tracks provide for interesting shunting operations. The track plan allows many possibilities for the installation of bridges, as longer sections of track are horizontal and do not lie in the gradient area. In the layout example shown here, a mighty viaduct has been installed in the front area of the landscape, which makes the layout appear much larger. This module protrudes approx. 30 cm below the layout plate and can be dismantled. This is just an example, the easy TRACK kit can of course also be built on a simple, flat plate. The ‘St Andreas’ is a sophisticated easy TRACK Railway Route Kit that allows a great deal of freedom in landscape design and promises exciting possibilities for both beginners and advanced model railway enthusiasts. H0 53620 easy TRACK Railway Route Kit ‘St Andreas’ Outer dimensions of constructed routes: 219 cm x 160 cm x 116 cm, 16.5 cm high Minimum floorspace required for assembly: 220 cm x 161 cm Product Highlights: - easy TRACK Railway Route Kit 'St Andreas' - 219 cm x 160 cm x 116 cm - With easy TRACK ‘Andreastal’ Guidebook - With H0 Track plans for Märklin® C-track and Märklin® K-track, Trix C-track, Piko A-track and Roco-Line without track bed Dimensions: External dimensions of the assembled trays: 219 x 160 x 116 cm Minimum floor space required for assembly: 220 x 161 cm Contents: ∙ 1:1 plot track plan ∙ Guide easy TRACK “Andreastal” ∙ Track plans for Märklin® C Track and Märklin® K track, Trix C track, Piko A track, Roco-Line without ballast ∙ 74 pillars, maximum pillar height 16.5 cm, minimum pillar height 7.1 cm ∙ 9 straight track segments, 8 cm wide ∙ 2 station segments, 23.8 cm wide ∙ 8 circle segments 60°, 8 cm wide ∙ 2 circle segments 60°, 16 cm wide ∙ 1 circle segment 30°, 8 cm wide ∙ 1 circle segment 30°, 16 cm wide ∙ 7 special circle segments, 8 cm wide ∙ 3 turnout segments ∙ Screws
On order, shipped within 4-5 days
NOCH easy TRACK – Finally Also for N Gauge! easy TRACK Railway Route Kit Mittelberg With the easy TRACK Kit ‘Mittelberg’, we are introducing a wonderful layout kit for N gauge. The varied route goes not only around the model railway landscape but also across it. A change of direction without a reverse loop makes the track plan exciting. A passing loop, a siding and the beautiful course of the route provide plenty of variety during operation. The layout can be operated analogue with two trains, which can alternate between doing their laps. In digital operation, the route network is large enough for two trains to do their laps simultaneously without disturbing each other. Product Highlights: easy TRACK Railway Route Kit Mittelberg 115 cm x 75 cm With N track plans for Minitrix, Fleischmann with ballast bed (piccolo), Fleischmann without ballast bed In addition to the individual parts for assembling the track system, the kit also includes the “easy TRACK” guide, which provides step-by-step instructions for assembling an easy TRACK track kit, as well as the “Albulabahn” guide (71901) in German. Contents: 1:1 plot track plan Track plans for Minitrix, Fleischmann with ballast bed (piccolo), Fleischmann without ballast bed and KATO-Unitrack 21 pillars; maximum pillar height 96 mm, minimum pillar height 31 mm 5 circle segments, 24° 17 circle segments, 30° 5 straight lane segments 3 special lane segments 2 point segments Wood screws Outer dimensions of constructed routes: 110 cm x 64 cm Minimum floorspace required for assembly: 115 cm x 75 cm
On order, shipped within 4-5 days
Where a Railway Modeller’s Dreams Come True! NOCH easy TRACK Railway Route Kit 'Albula Railway' for N Gauge The floorspace of the 'Albula Railway' of at least 200 cm x 100 cm offers N-gauge fans a lot of room to implement a railway circuit with crossing rail traffic in 1:160 scale. The clever track plan offers the option to build a fiddle yard or a double-track bypass. A headshunt is provided in the goods yard. This small detail takes the railway modelling fun to a whole new level, because the locomotive of an incoming train can be hitched from the front to the rear and then pull the wagons out of the goods yard again – just like the original! The very large station area is modelled on the track diagram of Bergün Station in Switzerland. With the Station 'Bergün', Engine Shed 'Bergün' and 'Brombenz Viaduct' kits that are available separately, particularly defining points of the Albula Railway can be perfectly reproduced in a model. In the NOCH Guidebook easy TRACK 'Albula Railway', we have shown you step by step (in text and pictures) how the layout is built. The route kit is not suitable for running with a raised pantograph and without contact wire. Due to the clearance height, raised pantographs must be supported and suspended at the track crossings. This is the only way to achieve the low percentage gradients. Included in the set: 1:1 plot track plan 1 Guidebook easy TRACK ‘Albula Railway for N Gauge’, German Track plans for KATO UNITRACK, Minitrix, Fleischmann with ballast bed (piccolo) and Fleischmann without ballast bed 62 pillars; maximum pillar height 12.7 cm, minimum pillar height 0.6 cm 15 circle segments, 45°, 4 cm wide 5 circle segments, 30°, 4 cm wide 4 circle segments, 15°, 4 cm wide 7 straight lane segments, 4 cm wide 14 railway station modules wood screws The route kit is not suitable for running with a raised pantograph and without contact wire. Due to the clearance height, raised pantographs must be supported and suspended at the track crossings. This is the only way to achieve the low percentage gradients. Outer dimensions of constructed routes: 199 cm x 99 cm, 13.9 cm high Minimum floorspace required for assembly: 200 cm x 100 cm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 64 x 77.5 mm. Product details: Set contents: 6 tracks Dimensions:64 x 77.5 x 4 mm Application: Suitable for Märklin C Track 24064 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24064 Dimensions: 64 mm × 77.5 mm× 4 mm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 77 x 77.5 mm. Product details: Set contents: 6 tracks Dimensions: 77 x 77.5 x 4 mm Application: Suitable for Märklin C Track® 24077 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24077 Dimensions: 77 mm × 77.5 mm × 4 mm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 94 x 77.5 mm. Product details: Set contents: 6 tracks Dimensions: 94 x 77.5 x 4 mm Application: Suitable for Märklin C Track® 24094 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24094 Dimensions: 94 mm × 77.5 mm × 4 mm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 172 x 77.5 mm. Product details: Set contents: 6 tracks Dimensions: 172 x 77.5 x 4 mm Application: Suitable for Märklin C Track 24172 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24172 Dimensions: 172 mm × 77.5 mm × 4 mm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 172 x 155 mm. Product details: Set contents: 6 tracks Dimensions: 172 x 155 x 4 mm Application: Suitable for Märklin C Track® 24172 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24172 Dimensions: 172 mm x 155 mm x 4 mm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 188 mm. Product details: Set contents: 6 tracks Dimensions: 188 x 77.5 x 4 mm Application: Suitable for Märklin C Track 24188 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24188 Dimensions: 188 mm x 77.5 mm x 4 mm
On order, shipped within 4-5 days
Build your individual model railroad layout! easy TRACK Individual With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are immediately ready for installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". The set contains 6 straight tracks 188 mm. Product details: Set contents: 6 tracks Dimensions: 188 x 155 x 4 mm Application: Suitable for Märklin C Track 24188 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realization of your model railway layout. And, above all, quickly and cleanly, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24188 Dimensions: 188 mm × 155 mm × 4 mm
On order, shipped within 4-5 days
Build your own model railway! easy TRACK Individual - Curved single-track routes With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are ready for immediate installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". This pack of easy TRACK curved tracks R1 (radius 1) contains six tracks. Product details: Set contents: 6 tracks Inner radius dimensions: 321.25 mm Outer radius dimensions: 398.75 mm 4 mm high x 77.5 mm wide Application:Suitable for Märklin C Track® 24130 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realisation of your model railway layout. And above all, it is quick and clean, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces Suitable for Märklin C-Track 24130 Dimensions of inner radius: 321.25 mm Dimensions of outer radius: 98.75 × 4 mm
On order, shipped within 4-5 days
Build your own model railway! easy TRACK Individual - Curved single-track routes With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are ready for immediate installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". This easy TRACK track pack curved R2 (radius 2) contains six tracks. Product details: Set contents: 6 tracks Inner radius dimensions: 398.75 mm Outer radius dimensions:476.25 mm 4 mm high x 77.5 mm wide Application:suitable for Märklin C Track 24230 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realisation of your model railway layout. And, above all, quickly and cleanly, because the routes are laser-cut to precision and are ready for immediate installation. Contents: 6 pieces Suitable for Märklin C-Track 24230 Dimensions of inner radius: 398.75 mm Dimensions of outer radius: 476.25 × 4 mm
On order, shipped within 4-5 days
Build your own model railway! easy TRACK Individual - Curved single-track routes With easy TRACK Individual you will find the right tracks for all important tracks and turnouts, perfectly tailored to the Märklin/Trix C Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are ready for immediate installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". This easy TRACK R3 curved track (radius 3) pack contains six tracks. Product details: Set contents: 6 tracks Inner radius dimensions:476.25 mm Outer radius dimensions: 553.75 mm 4 mm high x 77.5 mm wide Application:suitable for Märklin C Track 24330 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realisation of your model railway layout. And, above all, quickly and cleanly, because the routes are laser-cut to precision and are ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24330 Dimensions of inner radius: 476.25 mm Dimensions of outer radius: 553.75 × 4 mm
On order, shipped within 4-5 days
Installing turnouts for individual! easy TRACK Individual - Curved double-track routes With easy TRACK Individual you will find the right tracks for all important tracks and points, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are ready for immediate installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". This pack of easy TRACK curved tracks R1_R2 (radius 1 and 2) contains six tracks. Product details: Set contents: 6 tracks Inner radius dimensions: 321.25 mm Outer radius dimensions: 476.25 mm 4 mm high x 155 mm wide Application:suitable for Märklin C Track 24130/24230 Often requested and now finally here: easy TRACK individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track construction kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realisation of your model railway layout. And above all, it is quick and clean, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces Suitable for Märklin C-Track 24130/24230 Dimensions of inner radius: 321.25 mm Dimensions of outer radius: 476.25 × 4 mm
On order, shipped within 4-5 days
Installing turnouts for individual! easy TRACK Individual - Curved double-track routes With easy TRACK Individual you will find the right tracks for all important tracks and points, perfectly tailored to the Märklin/Trix C-Track. The track width specially adapted to the track geometry of the C Track is 77.5 mm for single-track tracks; the double-track tracks are 155 mm wide. The tracks can be processed quickly and cleanly. The tracks are precisely laser-cut and are ready for immediate installation. Simply glue them onto the already attached "easy TRACK rockers" or "connecting elements". This easy TRACK track pack curved R2_R3 (radius 2 and 3) contains six tracks. Product details: Set contents:6 tracks Inner radius dimensions: 398.75 mm Outer radius dimensions:553.75 mm 4 mm high x 155 mm wide Application:suitable for Märklin C Track 24230/24330 Often requested and now finally here: easy TRACK Individual. Whether you want an independent layout plan or an extension to a well-known easy TRACK track construction kit, this system offers you everything you need. Based on Märklin/Trix C-track, you will find all the necessary components for the realisation of your model railway layout. And above all, it is quick and clean, because the tracks are precisely laser-cut and ready for immediate installation. Contents: 6 pieces, suitable for Märklin C-Track 24230/24330 Dimensions of inner radius: 398.75 Dimensions of outer radius: 553.75 x 4 mm
On order, shipped within 4-5 days
The perfect base for your easy TRACK system easy TRACK Individual - Route construction made easy! The 1 mm thick base plates provide an optimum substructure for the stable posts of your individual easy TRACK system. The base plates are screwed directly to your base plate and thus ensure a stable substructure and precise alignment of the posts that will be attached later. This set contains 10 base plates with a height of 1 mm. Product details: Set contents: 10 base plates, including mounting screws Material: Durable, high-quality material Thickness: 1 mm Application: Ideal as a stable base for pillars Track construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin®/Trix® C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Contents: 10 pieces, including mounting screws Part number: 04101 Dimensions: 16 mm x 16 mm x 1 mm
On order, shipped within 4-5 days
The perfect base for your easy TRACK system easy TRACK Individual The 4 mm thick base plates provide an optimum substructure for the stable posts of your individual easy TRACK system. The base plates are screwed directly to your base plate and thus ensure a stable substructure and precise alignment of the posts that will be attached later. This set contains 10 base plates with a height of 4 mm. Product details: Set contents: 10 base plates, including mounting screws Material: Durable, high-quality material Thickness: 4 mm Application: Ideal as a stable base for pillars Track construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Contents: 10 pieces , including mounting screws Part number: 04104 Dimensions: 16 mm x 16 mm x 4 mm
On order, shipped within 4-5 days
Small pillar elements Easy-Track Individual With this set of pillar elements, you receive low pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 7.25 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness:7.25 mm height Application:Ideal for level tracks and stations Route construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether a gentle gradient for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we used the heights already known from the track kits. easy TRACK Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04207 Dimensions: 16 mm x 16 mm x 7.25 mm
On order, shipped within 4-5 days
Small pillar elements for level routes and stations easy TRACK Individual With this set of pillar elements, you receive low pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 9 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness:9 mm height Application:Ideal for level tracks and stations Route construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether a gentle gradient for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we used the heights already known from the track kits. easy TRACK Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04223 Dimensions: 16 mm x 16 mm x 9 mm
On order, shipped within 4-5 days
Pillar elements for flat stretches up to steep inclines easy TRACK Individual With this set of pillar elements, you receive low pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 14.5 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness:14.5 mm height Application:Ideal for level tracks and stations Route construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether a gentle gradient for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we used the heights already known from the track kits. easy TRACK Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04220 Dimensions:16 mm x 16 mm x 14.5 mm
On order, shipped within 4-5 days
Pillar elements for flat stretches up to steep inclines easy TRACK® Individual With this set of pillar elements, you receive low pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 29 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness:29 mm height Application:Ideal for level tracks and stations Route construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether a gentle gradient for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we used the heights already known from the track kits. easy TRACK Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04243 Dimensions:16 mm x 16 mm x 29 mm
On order, shipped within 4-5 days
These pillars will take you to the top! easy TRACK Individual This set of pillar elements provides you with high pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 43.5 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness: 43.5 mm height Track construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether shallow gradients for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we have used the already known heights from the track kits. easy TRACC Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04221 Dimensions: 16 mm x 16 mm x 43.5 mm
On order, shipped within 4-5 days
Flying high! easy TRACK Individual This set of pillar elements provides you with high pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 58 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness: 58 mm height Track construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether shallow gradients for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we have used the already known heights from the track kits. easy TRACK Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04258 Dimensions: 16 mm x 16 mm x 58 mm
On order, shipped within 4-5 days
Build a highly individual model railway layout! easy TRACK Individual This set of pillar elements provides you with high pillars in a proven size that you can easily install on your individual model railway layout. The pillars are simply placed on the base plates that have already been screwed onto the base plate. They can either be screwed or glued in place. This set contains 10 pillar elements with a height of 72.5 mm. Product details: Set contents: 10 maintenance elements Material:Durable, high-quality material Thickness: 72.5 mm height Track construction for your model railroad: Whether you are planning to build a new track from scratch for your model railroad or are looking for an extension for an existing easy TRACK set, our system has everything you need for your project. Specially developed for the Märklin/Trix C-track system, you will find all the necessary components for the substructure and design of your individual model railroad. Our range covers the entire area of track construction for model railroads. From base plates and support pillars to precisely laser-cut track elements. easy TRACK Individual makes the construction of your model railroad so effortless that track construction is quick and easy and you can devote yourself fully to your hobby. Thanks to the extensive pillar system, you are now the master of gradients: Whether shallow gradients for long trains or steep gradients for mountain railroads, everything is possible with easy TRACK Individual. You can either use the predefined sets or choose completely freely. Truly "individual". When defining the individual pillar parts, we have used the already known heights from the track kits. easy TRACK Individual is therefore familiar territory for easy TRACK connoisseurs. Contents: 10 pieces Part number: 04272 Dimensions: 16 mm x 16 mm x 72.5 mm
On order, shipped within 4-5 days